|
| |
|
|
Heating and cooling of the administrative building with hall
Hečko, Jakub ; Horká, Lucie (referee) ; Topič, Jan (advisor)
The bachelor thesis deals with the design of heating and cooling for an administrative building with a storage hall. The theoretical part focuses on large-area radiant heating. The computational part includes a detailed design of heating for the administrative building with a storage hall and a design for cooling the administrative building. The administrative building is heated by underfloor heating, while the storage hall is heated using hot water radiant panels. Cooling for the administrative building is designed using two-pipe cassette fan coil units. The source of heat and cold is an inverter air-to-water heat pump. Ventilation is considered forced, using air handling units. The design of hot water preparation is addressed as a priority. The project part includes drawing documentation and a technical report.
|
|
|
The effective coverage of the heat demand using solar system
Vítek, Lukáš ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
This master thesis aims to design the heating system and HDW preparation in an apartment building. The first variant deals with condensation gas boiler as the only energy source, while the second variant combines the gas boilers with the solar thermal system. The apartment building is located in Prag and has three above-ground floors and a basement. In the basement is the technical room. Convectors are being used for heat distribution. The theoretical part deals with the introduction to the solar thermal system.
|
|
|
Apartment Building - Design of Selected Reinforced Concrete Elements
Jakoubek, Lukáš ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis is focused on the continuous static solutions of monolithic reinforced concrete ceiling construction and the three-flight staircase in the five-storied apartment house. The entire structure is designed from concrete. To determine the effects of internal forces used computational design of Scia Engineer 2013.1. Assessment of the elements is performed by the first limit state. Work includes developing a static calculation, design reinforcement drawings, shapes and reinforcement drawings solved elements.
|
|
|
Garage with Fuel Station
Borkesz, Michael ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
Bachelor thesis presents the structural design of a load bearing steel structure of garage with roof construction of adjoining fuel station. The object is located in periphery area of Uherske Hradiste city, near Jarosov district. The ground plan dimensions are: 36 x 32 meters garage hall; 20 x 20 meters fuel station roofing. Heights of both construction tops are same – 10 meters above the surface. As the main material supporting elements was designed steel S355. The main supporting structure compose of trusses, which are hinged supported by columns. The roof deck is heat insulated, supported by purlins. The wall deck is simillar to roof deck, except of the front wall, which is partly composed of glass casing. At the both sides of garage hall are designed gates for vehicles. The roof deck of fuel station roof construction composes from one single trapezoidal sheet, also supported by purlins. The work contains structural design of individual elements, including mutual joints and anchoring. Calculations are performed according to standards of EN.
|
|
| |
|
|
Statical solution of reinforced concrete structure
Stehno, Pavel ; Ivana,, Švaříčková (referee) ; Zlámal, Martin (advisor)
In this bachelor thesis I study designing and appraising monolithic ceiling slab, which is statically solved by two - way slab. In order to dimension this load - bearing structure to effect of bending moments will be applied computer simulation. The solution is checked by simple method of total moments. Very important part of this thesis is structural analysis affecting pushing through the ceiling slab. Pushing will be soluted by manual analysis, results will be compared with output values of computer analysis. Critical state sagging of the ceiling slab is solved very marginally. The main purpose of this thesis consists of creation technical report, structural analysis and design documentation of soluted structure.
|
|
|
Reinforced concrete structure
Hubačková, Pavlína ; Jeneš, Rostislav (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of a department store. Elements for design are locally supported ceiling sab, column and foundation pad. The calculation of internal forces was performed in a computational program SCIA Engineer 17. The Results of the software are compared with the result of the simplified manual method. The settlement of foundation was performer in program GEO 5. A graphical documentation of selected elements is also a part of the thesis. The construction is designed and assessed according to ČSN EN 1992 - 1 - 1.
|
|
|
Concrete ribbed slab
Dvořák, Vít ; Perla, Jan (referee) ; Strnad, Jiří (advisor)
The bachelor thesis deals with a design of monolithic reinforced concrete, line supported and cross reinforced slab and a design of supporting reinforced concrete ribs. The plan of the slabs is rectangular and one time bent. The content bachelor thesis is calculation and design of reinforcement of slab and ribs. For the calculation was used software Scia Engineer 14 and was checked by manually calculation. The slab is located in the first floor of polyfunctional house. Other parts of the object are not covered by the thesis.
|
|
|
Design of the Flat Plate Slab
Krejčová, Jana ; Šulák,, Pavel (referee) ; Švaříčková, Ivana (advisor)
Bachelor thesis describes the design and assessment of monolithic concrete, locally supported roof structures of parking place and ramp, elaboration of shape and reinforcemenet drawings of selected structural element. The work also includes the teoretical part dealing with measures for buildings located in the gap. Calculation of internal forces was performed by komputer program SCIA Engineer in two different models. It was control by simplified method of summary moments and results were compared.
|
guest ::
