|
|
Construction phase in the building information model
Richterová, Zuzana ; Hanzl,, Vlastimil (referee) ; Berková, Alena (advisor)
The diploma thesis deals with the creation of construction phases in the building information model, which were created with the use of data from the design documentation of passport, data from the actual measurements taken mainly by laser scanning and the design documentation of reconstruction. This thesis describes the procedure from fieldwork (acquisition of measurement data), through its processing, to the final drawings including also the model in *.rvt format. The focus of the thesis is on the project phases, for which the issues arising in their creation are described. The stumbling block in this thesis was the inconsistency in the design documentations, which was mainly reflected in the creation of the model of the reconstruction phase. All the pitfalls that occurred in the thesis are explained in the text.
|
|
|
Bridge over the Jihlava river
Hibš, Daniel ; Klusáček, Ladislav (referee) ; Panáček, Josef (advisor)
This bachelor thesis deals with the design of a new bridge construction over the Jihlava river in Luka nad Jihlavou. The bridge is located on the road III/4044 at stationing 0,033 km. The bridge evidence number is 4044-1. Three studies were worked out in this thesis. First variant of load-bearing structure projects prestressed beams with composite slab, the next variant suggests dual girder construction and the third variant is prestressed concrete slab. The first study was selected – the bridge made of post-tensioned prefabricated beams with composited reinforced concrete slab. The calculation was carried out in the SCIA Engineer program, and selected outputs were checked by manual calculation. In addition, the time dependent analysis with construction phases was performed.
|
|
|
Bridge ower the Opavice river
Tang, Minh Phú ; Russnák, Adam (referee) ; Panáček, Josef (advisor)
The diploma thesis deals with the design of a road bridge on the I/57 expressway over the relocation of the cycle path, the Opavice river and the local road, which involves the relocation of the access to the waterworks. The bridge structure is located in the territory of the town of Krnov. A study of the area's bridges is part of the project and three studies have been prepared. Study A was chosen for detailed processing. It is a continuous box girder bridge with three spans. The superstructure is designed as a monolithic, post-tensioned structure. A sliding girder is being investigated for the structure's construction. Scia Engineer 18.1 is used to do the load effects computation. Only the consequences of vertical load effects have been addressed, with no consideration of horizontal load effects. The structure was evaluated using limit states, taking into account the impact of construction on its design.
|
|
|
Design of highway bridge
Luberová, Lucie ; Formánek, Ing Martin (referee) ; Zich, Miloš (advisor)
The subject of this bachelo r’s thesis is the design a new supporting bridge construction in Prešovský kraj, district Levoča the territory of Slovak Republic. This object is located on the highway D 26,5/120, at kilometer 13,499 795 and communication of third class – 131-00 bridges. The objective is the design of a perpendicular four-span construction, which is proposed in three variants. The first variant is a chamber girder with inclined walls from post-tensioned concrete height 2,480 m. The second variant is composed of two beamed cross-section and the third variant is composed of one beamed cross-section. For detailed assessment the first variant was chosen with a length of bridging of 166,000 m. The calculation of load effects is done by software Scia Engineer and compared with a manual calculation according to current standards. This bridge is designed according to limit states, construction´s influence on design is taking into consideration. Structural analysis, well arranged drawings and visualization are elaborated in this thesis too.
|
|
|
Bridge on the I/39 road
Pokorná, Šárka ; Svoboda, Adam (referee) ; Panáček, Josef (advisor)
The topic of this Bachelor thesis is design of thle bridge on the I/39 road. Three variants of studies were created. Study C has been choses as the best variant – prefabricated pre-tensioned beams with composite deck. Bridge with one span. Time dependent analysis was taken into account.
|
|
|
Continuous box girder bridge
Hajnoš, Mário ; Páleník, Petr (referee) ; Koláček, Jan (advisor)
The topic of this thesis is detailed design of supporting structure of continous box girder bridge across a deep valley called Lazný creek. The bridge have to pass the second class road with category S 9,5. The design is processed by two options. The chosen option is designed as a girder with five spans 44,8 m + 55 m + 55 m + 55 m +44,8 m. Total length of bridge is 268,57 m, the main girder is gradually cast into the formwork suspended on a special ceiling scaffolding. The axis of the bridge is in a plan straight with the constant transversal slope 2,5 %. The thesis contains six models in software SCIA ENGINEER. Part of the work is situated on time depended analysis with construction phases. Assesment of ultimate limit states and serviceability limit states were done by hand according to the valid standards and regulations. Structural analysis, drawing documentation and vizualization are parts of this work.
|
|
|
Pedestrian Bridge
Hibš, Daniel ; Kocourek,, Petr (referee) ; Stráský, Jiří (advisor)
This diploma thesis deals with the design of a new bridge construction over a multi-lane communication. The converted road is a pedestrian and biking trail connecting significant agglomerations. Three studies were worked out in this thesis and the C variant was selected for further detailed processing. It is an unsymmetrical suspended bridge with a cast-in-place deck. In the section above the communication, the bridge is made up of prefabricated segments. Suspension of the structure is made of two sloping pylons forming a V-shape. The analysis of the construction was carried out in the MIDAS Civil program, where a complete model of construction was entered, including a subsequent estacade. The model describes the construction process and includes creep and shrinkage of the concrete. The traffic, temperature and wind loads were used. The design was assessed for the ultimate limit states and serviceability limit states. The assessment was carried out in the IDEA StatiCa program, supplemented by manual calculations. The static calculations also include assessment of the harmonic response. Subsequently, overview drawings, detailed drawings and visualizations were developed.
|
|
|
Highway viaduct
Zatloukal, Bohuslav ; Šopík,, Leonard (referee) ; Stráský, Jiří (advisor)
The subject of this thesis is the design and assessment of the bridge across the expressway and the deep valley in section Hričovské Podhradie - Lietavská Lúčka of highway D1 in Slovakia. The box girder structure with eleven spans was chosen of three variants. For each course there is a separate structure. The design of the bridge is carried out according to limit states including consideration of the impact of construction. The assessment of the construction is carried out using the beam model. The appendix contains structural analysis, drawings and visualization of the bridge.
|
|
|
Prestressed bridge No. 202 on the expressway R2 in Slovakia
Janek, Tomáš ; Urban, Jiří (referee) ; Koláček, Jan (advisor)
My diploma thesis deals with design of the bridge number 202 on expressway in Slovakia. The bridge leads across the road number I50 (between Trenčín and Bánovce nad Bebravou) and railway number 130 (between Trenčín and Chynorany). For each course there is a separate super-structure. Only left super-structure is considered for the work. The box girder with four spans is chosen from three variations. This bridge is designed according to limit states, construction´s influence on design is taking into consideration. Structural model of construction is made as a spatial bar model. Structural analysis, well arranged drawings and visualization are elaborated in this thesis too.
|
|
|
Bridge over the Rajčanka river
Kavecký, Jakub ; Svoboda, Adam (referee) ; Panáček, Josef (advisor)
The aim of the bachelor thesis was to design a bridge over the Rajčanka river. The bridge is single field with perpendicular crossing of the watercourse. Three variants were created, one of which was the subject of thesis. For a detailed dimensioning, a variant with prefabricated additional-prestressed beams coupled with a concrete slab was selected. The static´s models were created in software SCIA Engineer 19.1 and IDEA StatiCa. Internal forces and load combinations were compiled including time-dependent construction and rheological phenomena. The reports were processed by manual calculation, according with the Eurocode. Climatic influences, such as wind and snow, as well as braking force have been neglected.
|
guest ::
