|
|
Designing intelligent data distribution networks
Stojaspal, Martin ; Škorpil, Vladislav (referee) ; Mišurec, Jiří (advisor)
Master thesis on topic Design of intelligent data distribution network is focused on the design of KNX bus system. The theoretical part is focused on problematic of KNX technology and on the rules, regulations and forms which must correct project documentation contain. The practical part is focused on creation of complete design of project documentation KNX bus system. In this thesis is basically shown how project documentation should look like.
|
|
|
Modern systems for lighting control
Klein, Tomáš ; Pavelka, Tomáš (referee) ; Bátora, Branislav (advisor)
This Master's thesis deals with intelligent installation systems, focused on lighting systems using the DALI bus system. Theoretical part of this work includes a list of currently available intelligent installation systems and its use in both households and industrial buildings. A summarizing description of KNX and DALI bus systems and their actuators and actuating units are a part of this paper. The practical part proposes two examplary boards designed for laboratories of UEEN VUT in Brno and describes its construction, as well as the programs necessary for its programming, control and monitoring. The outcome of this Master's thesis is a survey of possible remote control of DALI bus system's actuators and mutual compatibility of KNX and DALI bus systems. Furthermore, this paper includes background material for laboratory task, based on data found about remote control and DALI bus system's monitoring.
|
|
|
Design of demonstration panel KNX
Kalfus, Petr ; Kunc, Josef (referee) ; Bátora, Branislav (advisor)
This bachelor's thesis deals with the design of a demonstration panel KNX, which has to demonstrate the control of lights, blinds and appliances of the house with the help of devices from various manufacturers First, there is a search and acquaintance with the KNX system, it´s topological arrangement, devices and used communication media. Furthermore, an introduction is made to the individual devices used on the demonstration panel, with the functions they enable and with their application programs for the ETS environment. Based on the possibilities of the device, the design of the panel function is done. These functions have been programmed in the ETS 5. Next, a drawing of the electrical connection of the panel is made and documentation is made for it. Finally, an overall evaluation is made.
|
|
|
System wiring and the power balance
Horenský, Martin ; Bátora, Branislav (referee) ; Macháček, Jan (advisor)
Bachelor thesis deals with the theoretical part of the general problem of system wiring. The introductory part includes a general introduction. Gradually are described differences from classical wiring, to compare the advantages, disadvantages and cost. Shortly is described historical development from the first attempts to currently solution used by manufacturers. Subsequently used systems are divided into several groups and described. In the next chapter is performed research most famous electrical system from different manufacturers. In thesis there are described systems iNELS and Ego-n in detail. For each system are described basic functions, linking structure, used bus, the method of programming, a summary of advantages and disadvantages. In addition is made a brief description of system components. The practical part is focused on establishing own consumption of system wiring components in the model family home. Calculations and measurements are performed for three systems - iNELS, Ego-n and KNX. First, there are designed requirements that should meet the installation. Based on the requirements is created list of components of the systems installed - for each installation according to appropriate system.. From technical catalogs are designed theoretical input powers of each installation. The following is a test procedure for measuring educational panels. Results of measurements are processed and compared with catalog data for each component. In addition input powers are calculated from individual installation measured values. Results obtained from the measured and theoretical data are compared. From the each calculated power consumption is determined annual payment for consumption the system wiring. For each measurement system are recorded and reported data transfers through the bus. A complete evaluation of the results is shown in conclusion.
|
|
|
Design of smart wiring of apartment building
Ločárková, Michaela ; Bátora, Branislav (referee) ; Janík, Daniel (advisor)
This bachelor thesis deals with intelligent installations in buildings. Analyses of a classic and system installation are included as well as the specification of the options of system installation and its individual functions and types. The thesis also discusses norms that are important for the design of electrical wiring in residential buildings. Furthermore, it presents specific solutions for the electrical wiring using ABB free@home components in a 16-apartment house.
|
|
|
Design of system wiring of sports hall
Jaroš, Zdeněk ; Bátora, Branislav (referee) ; Janík, Daniel (advisor)
This diploma thesis focused on designing of systematic wiring of multifunctional sports centrum. The work is divided into two parts. The first part of the work is dealing with definitions and principles necessary for electrical project documentation. There is a presentation of the KNX bus control system, which is chosen for the implementation of the systematic wiring of the sports centrum. There is also an overview of currently used systems for wiring control. At the end, the design of artificial and emergency lighting is processed using a computer program. The content of the second part of the work is a complete project documentation for construction of the multifunctional sports hall using the KNX bus system. Furthermore, the documentation draws the design of power and data distribution to the relevant floor plans of the building, the design of power and system switchboards, an overview scheme of power distribution, topology of the KNX system, budget and technical report.
|
|
|
Remote control and visualization of bus-systems KNX and DALI for building management
Holub, Jiří ; Macháček, Jan (referee) ; Bátora, Branislav (advisor)
The thesis is focused on bus systems and their control by GUI. Basic energy management principles and the mostly known bus systems are analysed in the first – theoretical part of the paper. The theoretical part is then focused on software tool ETS 4, which is used for activation of system installation KNX. Software tool SmartServer, which is used for communication between bus system KNX and web interface, is described at the end of the first theoretical part. Two laboratory boards assembled of KNX and DALI parts were constructed in the second – practical part. Three laboratory tasks, which are prepared so they are related to theoretical description in previous part, were submitted in next step. Aim of the first task is to introduce basics of the board and PriOn interface. The second task is focused on DALI components and temperature control with PriOn regulating device. Creating of basic visualization and controlling of the board with SmartServer is described in the last task.
|
|
|
Project of wiring system with intelligent elements for family house
Lengyel, Ladislav ; Morávek, Jan (referee) ; Mastný, Petr (advisor)
The goal of this bachelor work was first of all the theoretical introducing to the project documentation and to the question of intelligent electrical installation. The first part of the bachelor work consists of terms and definitions of principles for creating the project documentation of electrical installation. With the view of the pages’ limitedness, it is not possible to describe in detail all the terms principles and standards used in creating of electrical installation. Because of that, the work focuses on the heavy current part of the technical documentation only. The next part of the work is focused on the question of intelligent electrical installation, its division and applicable possibilities in family houses. The advantages of the system installation in comparison to classical. In this part are further analyzed and described the different systems of different manufacturers of intelligent electrical installations. The closing part focuses on the blueprint of the project documentation of heavy current distributions. The distributions of the electrical installation for the family houses are realized with the help of intelligent elements from ABB company of the KNX system. This part furthermore focuses on the proper selection of system installation, placing of the distributions and elements of installations, inclusive of components of intelligent installation and a blueprint of subsidiary apartment distributer. Then it deals with the calculation of heat loss of the object and the selection of proper head pump related to it. With the help of determined power take-off the main breaker used in the apartment distributing board is appointed and the conjunction of the main residence wiring related to it.
|
|
|
The technique of smart school buildings
Drábková, Helena ; Mauder, Tomáš (referee) ; Štětina, Josef (advisor)
This bachelor‘s thesis briefly discusses about regulation of energy consumption in buildings with specialization on building intelligent systems and its application at schools. It briefly characterizes regulation of heating, ventilation, air-conditioning and lighting and its integration into centralized control component. Thesis discusses about systems from a few producers, short description of economic operation, a vision of these systems into the future and examples of implemented installations.
|
|
|
Computer control and programming of elements of intelligent electrical instalation KNX
Mašek, Jakub ; Baxant, Petr (referee) ; Bátora, Branislav (advisor)
The goal of this Bachelor thesis is to introduce to students the basics of working with the modern possibilities of buildings electroinstallation with the help of the KNX system. On the following pages is described a brief history of the system, the way it has developed, which organisations have involved in the developement and the needs for which it was created. The next section is focused on the system topology, the scructure of the network and important elements appearing in the decentralised system. Further is the thesis concerned with the principles of telegram communication, it’s process and available software support for the KNX system. The last practical part deals with programming in the KNX system and offers four different practical excercises created for the available laboratory control panel. Each of the excercises includes a problem, technical drawing of electical circuit and the problem analysis, which serves as a manual to solve the excercise step by step. Single excercises are designed to logically and by difficulty follow from lighting circuits, heating and cooling to eventually deleting and preparing the laboratory control panel for next lecture.
|
guest ::
