|
|
Design of prestressed bridge structure
Tylčer, Jan ; Rybák, Vít (referee) ; Klusáček, Ladislav (advisor)
This thesis describes the design of a road bridge in Trutnov through local communication. It is designed prestressed dvoutrámová construction of two fields with twin inclined struts. It developed a detailed static analysis and the bridge is considered to I. and II. limit state according to European standards - Eurocode. It is prepared detailed drawings.
|
|
|
Documentation of the vicarage in the Pavlov village
Slezáková, Gabriela ; Machotka, Radovan (referee) ; Kratochvíl, Radim (advisor)
The thesis is engaged with making documentation of the parish building of the Roman Catholic Church in the South – Moravian village Pavlov. The purpose of this work is practical measuring of the object in the terrain using geodetic methods, calculation of the measured values and the following performance of designs for the appropriate reconstruction of historic building. The text section describes the various preparatory, surveying and office works. The main output of this work is design documentation. It includes a thematic map of the building area, drawing floor plans of the first, second floor and roof truss, fasade views and sections of the building.
|
|
| |
|
|
Foundry in technical documentacion
Fišer, Petr ; Svoboda, Pavel (referee) ; Prokeš, František (advisor)
This bachelor’s thesis deals with design documentation of foundry. It present‘s the basic rules of making design documentation, listing of used types of documentation and all their formal belongings. It’s foremost determined to complete the basic knowledge of first year students VUT FSI with assigned project Foundry. Set of new problems is also part of this thesis.
|
|
|
Weldet constructions in technical documentacion
Bartošek, Daniel ; Brandejs, Jan (referee) ; Svoboda, Pavel (advisor)
The presented bachelor´s thesis deals with design documentation of welded con-structions. It provides an overview of weldment design types, basic usage principles and formal prerequisits. The thesis should serve for education of weldment design documentation, for which purpose the set of tasks included in the annex was also created.
|
|
|
Family semi-detached house
Nykodým, Petr ; Jarošová, Petra (referee) ; Berková, Petra (advisor)
The subject of the Bachelor's thesis is the preparation of design documentation of the family semi-detached house. The building is located in the village of Unčín on plot number 547/1. The total area is 1086 m2. This is a two-floors object, without cellar, located on flat terrain, designed for 2x4 persons. The perimeter walls of the house are lined with clay block from the Porotherm company and they are based on the concretefoundation strips. The ceiling construction are made of Porotherm system of ceramic inlays Miako and beams the POT. The roof is gabled. Roofing is designed of aluminum SATJAM Roof Alumat brown color. The staircase is a double reinforced concrete. Boot part of the semi-detached house have a garage for 2 cars. Over it is a walkable terrace.
|
|
|
Family house
Matulík, Jakub ; Žižka, Lukáš (referee) ; Rusinová, Marie (advisor)
The bachelor thesis deals with desing documencation of a family house with a hair salon in Medlovice. The house has two floors and there is no celler. It is connected with a garage for one car. Ground plan concist of two contigous rectangles with hipped roof. It is situated in a nearly flat terrain. The main entrance to house is located to the northeast. The building is designed from the structural system POROTHERM.
|
|
|
Detached house with ceramic workshop
Labudová, Martina ; Špás, Luděk (referee) ; Kacálek, Petr (advisor)
The subject of this bachelor thesis is a desing of a detached house with ceramic workshop. The building is situated at the outskirts of the settled area of a city district Brno-Soběšice. The proposed building consists of one part, the detached house with ceramic workshop. The building is designed as a partial basement, with a basement and two storeys. Living section is adapted for housing four people. There are three parking places for cars on the plot, including one covered. The building is designed as a masonry building, where the vertical load-bearing structures consist of concrete blocks of permanent formwork Prefa Brno and ceramic blocks Heluz, horizontal structures constitute a system of floor system Heluz. The building is roofed by a warm flat roof.
|
|
|
Detached Haus with the Photo Studio
Remeš, Dominik ; Pospíšil, Jaroslav (referee) ; Smolka, Radim (advisor)
The subject of the bachelor thesis is design documentation for detached house with workshop. The object is situated in the South- Moravian region, in the city of Šlapanice. Detached house is designed as 5+1 and planned as three-story building, with two above-ground floors and a basement. Workshop, which serve as a photo atelier is in the basement, with its own entrance from the east side of the plot. Besides of the photo atelier, there is toilet, cloak-room, bathroom and an office in the workshop. Photo atelier and family house are connected by staircase. Main entrance of the family house is on the north side of the house. There is entrance for pedestrians and drive way to the garage as well. Entrance for pedestrians is in a wind porch, which leads to the main hall with entrance to the garage. There is staircase nearby main entrance, which connects all floors. In the first floor there is common part of the house with living room, kitchen and study. In the second floor is a resting part made for sleep for all family members. Vertical load-bearing structures are made from clay-grinding bricks. Horizontal load-bearing structures are composed from clay inserts and there is a saddle roof, split to two parts.
|
|
|
Family house
Trněný, Jan ; Hlásková, Michaela (referee) ; Rusinová, Marie (advisor)
This Bachelor thesis deals with design documentation for implementation of family house construction. In the house includes dental surgery. The object is situated on a parcel with slightly sloping terrain in the village Pustiměř. The building for four-member family has two floors, no cellar and it is connected with a garage for one car. The house is designed of brick construction system, ceramic tile Porotherm. Whole ceiling structure is made of Porotherm using POT beam and ceiling fillers MIAKO. The house including the garage is covered with a gabled roof.
|
guest ::
