|
Trailer frame VARIANT for transport cabel spools
Buchta, Vladislav ; Kašpárek, Jaroslav (referee) ; Kašpárek, Jaroslav (advisor)
Thesis deals with the truck frame VARIANT 252. The main task is to analyze weighting states, setting the values for weigting states. Strength control of the frame by using the Finite Element Method (FEM). And each subsequent frame adjustments based on the results of FEM. Part of this thesis is also the drawing documentation provided a modified frame assembly and each modified components.
|
| |
|
Field strength measurement
Novák, Tomáš ; Dřínovský, Jiří (referee) ; Nováček, Zdeněk (advisor)
This thesis is focused on problems of measurement of field intensity especially in short-wave zone of received frequencies. To measure the intensity of electric field, it is necessary to use a suitable antenna whose properties and characteristics/parametres meet best the requirements of this measurement. These requirements are analysed/discussed in the introductory part of this thesis. From these requirements resulted one specific solution which is applicable to this problems. This solution is frame antenna which meets /matches best the requirements of this measurement. Furthermore, a complete suggestion for the frame antenna as well as its calculations were discussed. From individually calculated results graphical functionalities were set together that provided the bases for selection of suitable parameters for frame antenna. Then these bases were verified with similar antenna that was available. In second part of this thesis we modified standard antenna modul RFT FMA11 so that there would be a possibility to use it with any selective microvoltmeter.
|
|
Unit for wireless transmission of electrical energy
Jelínek, Aleš ; Kopečný, Lukáš (referee) ; Žalud, Luděk (advisor)
The aim of this work is to prove the practical applicability of the concept of contactless energy transfer using induction coils. The first part deals with the mathematical model and theoretical proof of the concept being able to work in practice and describes the process of detecting resonance of receiver circuit on transmitter side. Next chapter describes hardware solution of the experimental prototype. The last part contains measurement results of a coupling coefficient of coils and discusses performance and notable features of the prototype.
|
|
Two-quadrant switching current source for inductive loads
Húsek, Jan ; Chmelař, Milan (referee) ; Hanák, Pavel (advisor)
This master`s thesis deals with design and realization of two-quadrant switching current source for inductive loads. Output current adjustable range is 0 – 1A. Selected topology enables change of current direction. Current supply is made with TDA8920 integrated circuit. Thesis also contains basic information about switching supplies and coils.
|
|
Magnetic fields for biomedical experiments
Otýpka, Jan ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
In this work deals with magnetic fields for use in biomedicine. This solution involves the choice of the correct geometric arrangement of coils for generating magnetic field with a homogeneous distribution of magnetic induction of the widest possible area. The paper compares thre traditional types of coils, solenoid, toroid and Helmholtz coil. For Helmholtz and solenoid coil and is then carried out an analysis of the magnetic flux density in the inner space. Next part is devoted to electrical resonance in the LC circuit. This is then utilized for the development of pulsed magnetic field in the Helmholtz coil. It summarizes the theoretical and practical knowledge to design and construction of resonant converters. The end is devoted to the measurement of circuit parameters and verification of theoretical knowledge.
|
|
Winding diagnostics using surge test
Vojtěch, Pavel ; Šlezingr, Jan (referee) ; Drápela, Jiří (advisor)
Master‘s Thesis deal with analysis given to diagnostic method plus her applicability to failure detection electrical machine plus apparatus in different phases their live. A further realization physical model with subtransient generátor PSG204A 4kV, for teach – in disorder on single – layer air coil plus stator winding induction motor inclusive evaluation results test.
|
|
Electromagnetic flowmeter
Dohnal, Zdeněk ; Bejček, Ludvík (referee) ; Beneš, Petr (advisor)
This thesis deals with inductive flowmeters, specifically insertion inductive flowmeters. It examines in detail a blueprint of such flowmeter, consisting of probe, electromagnet, electrodes, exciting module and evaluation of signal. Gauging of a flowmeter designed this way, measuring data, charts, evaluation and interpretation. Consequent measurement in a calibration laboratory to elaborate, evaluate and interpret the results.
|
|
Electric induction furnaces in foundries
Bruštík, Josef ; Kaňa, Václav (referee) ; Šenberger, Jaroslav (advisor)
The main aim of this Bachelor thesis is to create a technical summary on the topic of “The electric induction furnaces in foundries” and be more closely familiar with this issue. A division of furnaces and ways of melting by particular types of furnaces are briefly described. On the basis of gained knowledge, an evaluation of economic and technical advantages of these melting devices was performed and subsequently it is recommended for further usage in the foundries.
|
|
Description Methods for Electrical Systems and Their Solving
Křižka, Jakub ; Němec, Zdeněk (referee) ; Šeda, Miloš (advisor)
The objective of bachelor thesis is a searching description of methods, which are usually used for calculation of circuit variable values in electric circuits. At the beginning is thesis concerning with description of individual components (power supplies, electronic components) used in electric circuits, then also with analysis of rules, which are the fundamental for a calculation of values in electronic circuit – Ohm’s rule and Kirchhoff’s rules. Indivisible part of thesis is also summary of special methods, such as method of loop currents (mesh analysis), method of nodal voltage (nodal analysis) etc. and their demonstration on examples of electric circuits. The structure of thesis is coursebook and gives successive summary of information in area calculations of electric circuits.
|