|
|
Airplane Cooling System Optimization
Lajza, Ondřej ; Píštěk, Antonín (advisor)
Dissertation thesis is focused on the aircraft cooling system optimization. The knowledge of the pressure loss is necessity for design of an optimal system. In the beginning of the thesis, the different designs of piston engine cooling systems are described for both aircrafts and automobiles. Other sections outline the determination of the coolers characteristics and describe the different test sections applicable for the characteristics measurement. The test section built at the Institute of the aerospace engineering is described as well. Practical part of the thesis describes the calibration of the test section. The measurements of the specific coolers were compared with the CFD simulation of two models - the simplified cooler model and cooler element model. Additionally, the measurements were compared with results obtained at specialized coolers testing facility.
|
|
|
Use of High-pressure Cooling System for Long-turn Machines
Kinc, Jiří ; Kouřil, Karel (referee) ; Sedlák, Josef (advisor)
The thesis describe high-pressure cooling system and present experiment, when is using this cooling technology for turning cylindrical workpiece to long-turn machines. Workpiece manufactured using high-pressure cooling system is compares with Workpiece manufactured using low-pressure cooling system. Results are analyzed, evaluated and plotted in a single graphical relationships. The thesis is completed the analysis, discussion and recommendations regarding the using of high-pressure cooling.
|
|
|
Water Cooling System for Formula Engine
Bastl, Ondřej ; Janoušek, Michal (referee) ; Svída, David (advisor)
Diploma thesis is focused on design engine cooling system for formula vehicle type. The aim is introduce with cooling systems of Formula Student/SAE car and competition rules. Based on the famous engine determine the initial conditions for the cooling system. In addition to design all parts of the cooling system and check affordability.
|
|
|
Production technology flexible plastic clip
Mikulenka, Martin ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Currently, the plastics industry has a wide range of applications due to the possibility of a fully automated process or through increased production efficiencies. The reason for this choice of the thesis was to understand the whole issue of plastic injection molding process. The specified component is used to atach the sail, which serves to protect workers in the welding sector. A specified number of the series is 350 000. The work includes a theoretical problem of injection molding process, selection of technology, material selection and design of mold. An integral part of every design mold is a simulation of injection, which is also included. In conclusion of thesis is the calculation of the various stages of production and operation of the injection mold.
|
|
|
Optimization of cooling of a family house by using a geothermal system
Buchta, Jan ; Formánek, Marian (referee) ; Šikula, Ondřej (advisor)
The master’s thesis deals with optimization of cooling system of family house using borehole heat exchanger as a single cooling source. In the experimental part of the thesis was carried out long-term mearurements. The main part of the master’s thesis is the development and verification mathematical and physical model of thermal behavior chilled room. The result are computer simulations and evaluation of individual scenarios and design requirements for a potential optimization of measurement and control system. The theoretical part generally deals with radiant cooling systems.
|
|
|
Ground-source heat pump
Kovářík, Tomáš ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
Master’s thesis deals with the theme in three parts theoretical, practical and experimental. Project deals with heating nursery school and experiment deals with capacity reduction borehole heating exchanger for ground – source heat pump.
|
|
|
Air Conditioning of Hotel Komplex
Očkan, Tomáš ; Děckuláček, Zbyněk (referee) ; Gebauer, Günter (advisor)
The first part of the thesis is aimed on creating internal microclimate of the hotel complex by air conditioning systems. The choice of systems is based on theoretical knowledge’s and practical application in abroad. In the second part there is designed solution for hotel apartments and conference hall. The other areas are designed only conceptual. Technical solutions of chosen systems are the main outcome of the thesis. In the third part there are published my experimental measurements from laboratories of Oulu University of Applied Sciences. For the study field of Air Conditioning has been chosen Air Flow Measurement and Test Operation of HVAC unit. For the study field of Renewable Energy has been chosen the Heat Pump and for study field of Refrigeration has been chosen Water Cooling and Chiller Box.
|
|
| |
|
|
Water Cooler for Formula Engine
Malovaný, Daniel ; Beran, Martin (referee) ; Svída, David (advisor)
The purpose of this thesis is to analyze the radiators and cooling systems used in cars participating in the competition Formula Student/SAE. Furthermore, based on input conditions to make a basic calculation and design of the water cooler and in the end of this work to evaluate the proposal.
|
|
|
Design Solutions and Development Trends of Formula Student Cars
Adámek, Ladislav ; Porteš, Petr (referee) ; Ramík, Pavel (advisor)
This bachelor´s thesis is engaged in history and description of progress and recent trends in Formula Student/SAE competition. The bigger part of this thesis is devoted to complex summary of structural designes of monoposts and construction units of most succesfull teams. The point of this survey was getting information about construction of competitor´s cars. Theese informations should be used for building own car.
|
guest ::
