|
|
Static Analysis of certain types of timber structures
Čáslavová, Sandra ; Brdečko, Luděk (referee) ; Zídek, Rostislav (advisor)
This bachelor thesis is focused on analyzing a timber roof trusses, identifying and evaluating differences in their behavior. The thesis is aimed to review conventional trusses, create plane models which are then compared with each other. From selected truss was used to create a 3D model, on which are key joints are reviewed. Scia Engineer 15.2.140 program is used to create an expert opinion. This program is based on FEM principle.
|
|
|
hangar
Sejbalová, Kateřina ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
The aim of this work is design and assessment of the steel structure of a two-aisle airport hangar for small aircrafts in Kunovice. Building has rectangular plan with dimensions 36 x 27 m. The main supporting systém is composed of truss girders, which are pinned on culumn. The distance between the truss girders is 9 m. For design was used the software Scia Engineer.
|
|
| |
|
|
Locksmithery
Benýšek, David ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The bachelor thesis deals with design of the load-bearing steel structure of locksmithery, which is located in the village Oldřichovice, in the old collective farm complex. The structure is designed for ultimate and serviceability according to normative requirements ČSN EN. The construction has a width 8,32 m, a length 20 m and a syntactical height 6,0 m. It is a structure consisting of transverse framework bindings at a distance of 5,0 meters from each other. For all elements was used steel S355. In the building is designed bridge crane EKKE about the capacity 5t from company DEMAG. The work consists of a static calculation, which assessed individual cross-sections and joints and also contains drawings and engineering report.
|
|
|
Rozebíratelné spoje ve strojních konstrukcích
Hejzlar, Samuel
Presented Bachelors thesis is focused on threaded joints in engineering. There is listed simple determination of theses joints in the first part of the thesis as well as the type determinations, sample of practical use and type of the load. In the second part, are specifically described some screw joints used on compaction rollers, produced and developed in Ammann CZ company, which is located in Nové Město nad Metují and produce these rollers since 1953.
|
|
|
Analysis of traditional timber structures
Šigutová, Petra ; Vlk,, Zbyněk (referee) ; Zídek, Rostislav (advisor)
The subject of my bachelor´s thesis is the research of the statistical effect of a barn´s rafter. The preface is devoted to the creating two - dimensional models of the basic types of the rafters and their behavior during the loading. The main part of my thesis deals with the composing three-dimensional models of the roof. I try to depict the behavior of the structure after the deformation of the joints. I compare the results to the real behavior of the structure.
|
|
|
Steel Structure of Observation Tower
Virág, Patrik ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
The subject of the diploma thesis is design and structural analysis of loadbearing steel structure of observation tower, which is located southeast of Černá Hora, township Blansko. The design is processed in two options. Parts of the thesis are engineering report, structural design report for both of the options and graphical documentation in specified range. The structure’s height is 25.3 m and maximal ground plan dimension is 6 x 6 m. Steel grade S355 was chosen as main material. The sub-objectives of the structural analysis are load effects calculations (permanent load, imposed load and climatic load), entering of loads to the calculation model and calculation of internal forces and deformations. An assessment of the supporting elements and selected joints is also included. There are dynamic design features considered in the calculation. All calculations were performed in accordance with valid ČSN EN standards.
|
|
|
Traffic Connection Searching in Transport Schedules
Žižka, Ondřej ; Bidlo, Michal (referee) ; Jaroš, Jiří (advisor)
Everyday need of modern society is a mass personal transit on a regular basis. For this purpose, mass transit systems exist which obey aforethought schedule. This thesis' goal is to examine the means of automatic search of connections from one place to another, implement such search, and to advance the search algorithm using the soft-computing paradigms. Minor goal would be a research of SQL language procedural capabilities, which could support mass pseudo-parallel computations.
|
|
|
Exhibition pavilion
Řeháček, Jakub ; Šmak, Milan (referee) ; Sýkora, Karel (advisor)
The thesis deals with the design and review of the supporting structure of the exhibition pavilion in the suburb of Brno. The design is shaped dome built over the octagonal floor plan with eight lateral niches. The pavilion is 30m wide and 8 meters tall.
|
|
| |
guest ::
