|
|
Municipal Office Building in Předboj
Klinke, Jakub ; Semrád, Antonín (referee) ; Štěpánek, Ladislav (advisor)
The subject of the diploma thesis is the design of the construction of a multifunc-tional building of the municipal building in Předboj and the elaboration of the construction documentation. The proposed building is located near the existing village center. The building is designed on undeveloped land, which forms an im-aginary boundary between the existing buildings from the end of the 19th century and the beginning of the 20th century and the new buildings from the beginning of the 21st century. The architectural character suitably combines the character of the original development with gabled roofs with modern elements characterizing the new development. The building is divided into two wings. The east wing is one-storey and houses the premises of the municipal office. The west wing is mul-ti-storey. In the basement there are the technical facilities of the municipal office, on the first floor there are the library and the ceremonial hall. The attic is intended for the detached workplace of the basic art school.
|
|
|
Small apartment building
Konečný, Patrik ; Žajdlík, Tomáš (referee) ; Šuhajdová, Eva (advisor)
The subject of this bachelor's thesis is a proposal for the elaboration of project documentation for an apartment building for a building permit and construction. The considered area for the proposed building is a system of plots in the cadastral area of Sadová in Brno (South Moravian Region). It is a partially basement building with three floors, which is located on a slight slope. The building has 12 residential units of various layouts, of which one apartment is adapted for people with disabilities. The apartments have loggias, balconies or terraces, which provides an above-standard view of the surroundings. The building also has an outdoor parking spaces. Lime-sand bricks are designed as load-bearing and non-load-bearing masonry, and monolithic reinforced concrete ceilings are designed. The building will be insulated using the ETICS contact thermal insulation system. Facade colors will be chosen in shades of white and gray. The building also has an elevator and a reinforced concrete staircase.
|
|
|
Apartment building, Uherské Hradiště
Polášek, Viktor ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The subject of the bachelor’s thesis is an apartment building in Uherské Hradiště in Zahrádky street. This building is partial basement with four above-ground floors. There are 11 residential units, in the basement there are cellars for individual flats. The load-bearing masonry of above-ground floors will be made of ceramic blocs, in the basement will be used BEST formwork, horizontal construction is made of reinforced concrete. The building will be insulated with ETICS contact thermal insulation systém. The roof of the building consists of a single-skin flat roof. The building has ane levator and reinforced concrete staircase.
|
|
|
Apartment building
Jaroš, Radek ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The subject of this bachelor's thesis is the design of a new apartment building and the elaboration of project documentation for the construction. The apartment building is located on the southern outskirts of the city of Brno in the Brno - Jih district, in the part of the village Přízřenice on flat terrain. The building is designed as a free-standing building with four above-ground floors and one underground floor completely sunk below ground level. In the underground part of the apartment building there is a technical background of the building and individual cellar cubicles for the housing units. There are twelve residential units in the above-ground part of the building, three units on each floor. Housing units on the ground floor are complemented by terraces, housing units on other floors are complemented by balconies and loggias. A barrier-free entrance to the building is designed. An elevator is also designed in the building. The above-ground part of the apartment building is made of Porotherm ceramic blocks and insulated with a contact thermal insulation system. The external load-bearing walls in the basement are monolithic made of reinforced concrete. The horizontal load-bearing structures are made of monolithic reinforced concrete slabs. A single-skin flat roof is designed for the apartment building. The building is based on foundation strips. The building is designed parking with a sufficient number of parking spaces. The house is designed according to the requirements for buildings with almost zero energy consumption. Such a requirement has been achieved through heat recovery and building envelope parameters.
|
|
|
Implementation of Roof of Apartment Building in Olomouc
Antal, Martin ; Šlanhof, Jiří (referee) ; Nečasová, Barbora (advisor)
The subject of this bachelor's thesis is the solution of the technological stage of the roofing of an apartment building in Olomouc. This work includes accompanying and summary technical report, solution of wider transport relations, time plans, item budgets, technical management of construction site equipment, health and safety, control and test plans, technological regulations and staff balances. The aim of this bachelor thesis is to compare selected variants of roofing in terms of subjective, financial and time.
|
|
|
Apartment house in Uherské Hardiště
Svízela, Martin ; Pilný, Ondřej (referee) ; Čuprová, Danuše (advisor)
The bachelor's thesis deals with the construction and layout of a newly built apartment building in Uherské Hradiště on plot no. 885/1 in Zahrádky Street. This is a basement building with above-ground floors. There are 10 flats on the upper floors in the basement there are common areas of home equipment and cellars for individual flats. The ground floor consists of 3 residential units a cleaning room and a carriage house. There are 4 residential units on the second floor and there are on the third floor 3 housing units. The building is based on simple concrete foundation strips. The vertical construction system consists of ceramic blocks in the above-ground part and BEST formwork in the underground part the horizontal construction is made of ceramic concrete. The roof of the building consists of a single-skin flat roof. The land on which construction is planned is grassy over the entire area. The entrance to the building is situated on the east side. The projected accommodation capacity is for 24 people. Adjacent to the building is a parking area about 17 parking spaces, of which 1 is for people with reduced mobility.
|
|
|
Multifunctional house in Jablonec nad Nisou
Klinke, Jakub ; Průša, David (referee) ; Štěpánek, Ladislav (advisor)
The subject of the bachelor thesis is the design of a multifunctional apartment building with large flats and the elaboration of construction documentation. The building is situated in a quiet location of the statutory city of Jablonec nad Nisou in a nearby distance from the dam, which is used for rest and recreation. The surrounding development consists of apartment buildings from the beginning of the last century with a height of three to four floors. The building itself is detached with four floors and one basement. On the first floor there is an establishment intended for administrative use. The first floor also contains a barrier-free apartment and a barrier-free entrance to the building. On the level of the first floor, there is also a car park with barrier-free access to the building. There are always 2 apartments on the other floors. The basement is designed as a technical floor and there are also cellars belonging to the apartments.
|
|
|
Apartment building
Jachan, Radek ; Galata, Jindřich (referee) ; Lavický, Miloš (advisor)
The aim of the bachelor's thesis is the elaboration of project documentation for the design of an apartment building in the village of Pustiměř. The building is designed as a detached house. It has a rectangular shape and is covered by a flat single-skin roof. On the first floor there is a background of the house and a garage, other parking spaces are provided on the plot. The floors of the 2nd floor, 3rd floor, 4th floor are used for living and there are a total of 6 housing units, each with a size of 4 + kk. The apartment building is brick with a contact thermal insulation system, the 1st floor made of lost BEST formwork cast in concrete and tied with fittings, and the 2nd floor made to the 4th floor made of YTONG aerated concrete blocks. The ceiling structure is reinforced concrete monolithic. Part of the project documentation is also a basic assessment of the building in terms of building physics.
|
|
|
Guesthouse with Restaurant
Kyška, Roman ; Pažourek, Vít (referee) ; Rusinová, Marie (advisor)
The diploma thesis deals with the proposal of a new guesthouse with a restaurant. The building is located in a slightly sloping terrain in the cadastral area of the village Vlasatice Brno-venkov in the South Moravian Region in the Czech Republic. The ground-plan shape of the building is mostly rectangular with folded facade parts. It is a partially basement building, to a lesser extent, recessed below ground level with three above-ground floors. The pension has a total of 22 rooms with a total capacity of 46 persons for short-term accommodation. Four rooms on the first floor are designed as wheelchair accessible. For the proper operation of the pension there is a reception on the first floor and an office with the appropriate meeting room on the second floor. One-storey part of the building consists of a restaurant with a capacity of 76 persons, which is designed as a frame skeleton with intensive vegetation single-skin flat roof. The preparation and meals and service of the restaurant is ensured by the kitchen together with its operations and respective warehouses located on the first floor. The basement is used primarily for the operation of the guesthouse, which is located air-conditioning engine room, utility room, workshop or warehouse. The building is for the most part bricked and the peripheral, internal bearing or partition walls are made of polished ceramic blocks porotherm. External walls are insulated with contact insulation system ETICS of gray EPS polystyrene. The glazed Schüco façade is used as the shell of the skeleton structure. The construction of the ceiling is composed of filigree ceiling panels and a singlelayer flat roof with a slope of 3% is used for roofing the building. The thesis contains project documentation for the realization of the construction.
|
|
|
Apartment house
Vrbický, Josef ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The subject of the bachelor thesis is the design of a new building of a detached apartment building in Holice, in the form of project documentation for construction. The building is designed with bricks and ceilings made of beams and ceramic inserts. The peripheral masonry is designed from ceramic brick blocks th. 300 mm completed with contact insulation system ETICS th. 200 mm, which will be equipped with silicone plaster 1,5mm. The internal load-bearing masonry is designed from acoustic ceramic brick blocks th. 250 and 300 mm. Partitions are designed from acoustic partition walls. On the ceilings, a heavy floating floor with excellent acoustic properties is designed. The roof is designed flat single-skin with thermal insulation of mineral wool and with waterproofing layer made of bitumen modified SBS strips laid in two layers. Balcony railing is designed aluminum with safety glass paneling.
|
guest ::
