|
| |
|
|
A microemulsion-based phase-separated hydrogel
Kacvinská, Katarína ; Sedláček, Petr (referee) ; Mravec, Filip (advisor)
The main aim of the bachelor thesis is to create a microemulsion based – phase – separated hydrogel. It describes the possible mechanism of preparation, which is based on microemulsion. Microemulsion was prepared by solubilization of oil in the hydrophobic parts of cationic surfactant CTAB. Followed by phase separation with hyaluronic acid has occurred the phase – separated hydrogel. Rheological measurements show that this hydrogel decreases mechanical properties as compared to phase – separated hydrogel from micellar solution. Overall, these hydrogels with the addition of oil, reduce the viscoelastic character, decrease elastic module and possibly increase the viscosity. The higher molecular weight of hyaluronan in these modified hydrogels forms stronger and more rigid gel structures, compared to low molecular weight. The measurements show that the hydrogel containing microemulsion of olive oil improve mechanical properties, unlike the microemulsion of sunflower oil. TSCPC analysis shows formation of spherical structure in the hydrophilic part of gel. Based on the lifetimes of Nile red this may be an emulsion w/o or more complicated structure like o/w/o.
|
|
|
Rheology of collagen hydrogels and its nanocomposites
Voldánová, Michaela ; Vojtová, Lucy (referee) ; Jančář, Josef (advisor)
This bachelor thesis deals with the phenomenological description of the rheological behavior of pure collagen I and its nanocomposites with addition of hydroxyapatite in four concentrations. Measurements were performed on a rheometer in the configuration cone – plate for a range of shear rates from 0 s-1 to 100 s-1 under defined conditions. At 4 °C, the collagen in samples of a specific composition remains dissolved; collagen retains his native character and the precursors of hydrogel are in the liquid state. By heating the aqueous solution of collagen with neutral pH leeds to spontaneous crosslinking process into fibrillar structure. At 37 °C, fibrils grow into the gel structure, however, the rate of its formation is dependent on the amount of collagen fibers. The measured data are processed in the form of flow and viscosity curves, from which the rheological behavior of the sample or structural and transformational changes in response to mechanical stress and temperature changes are evaluated and compared. This knowledge can be used to manipulate with hydrogels. Generally, it can help as a basis for further development of collagen, its interaction with HAP and factors influencing their stability or effectiveness.
|
|
|
Viscometric study of L-Lysine- and 6-aminocaproic acid-hyaluronan systems behavior within the range of low aminoacids concentrations
Šimáčková, Marcela ; Běťák, Jiří (referee) ; Chytil, Martin (advisor)
This bachelor thesis investigates the interaction between high-molecular weight hyaluronic acid (1.75 MDa HA) and amino acids, particularly lysine and 6-aminocaproic acid. The interactions should occur between the carboxyl groups of HA carrying a negative charge and a positive charge located on the nitrogen atom of the protonated amino acids. The presence of these interactions would mean the possibility of establishing bioactive compounds, e.g. drugs, on hyaluronic acid, in which it would act as a targetting carrier. The interactions were examined at low concentrations for both aminoacids, i.e. below 10 mmoldm-3, and for 6-aminocaproic acid also at high aminoacid concentrations, i.e. above 20 mmoldm-3. The presence of interaction was investigated using not only rheology, but also by measuring pH and conductivity. Based on this research, the interactions manifested in terms of a decrease in the system viscosity.
|
|
|
Ageing of asphalt binders
Střasáková, Monika ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
The theoretical part of this thesis describes the rheology of bituminous binders, aging of asphalt binders and laboratory methods simulating short and long term aging. The following describes an empirical tests (needle penetration, softening point ring ball method) and functional tests (complex shear modulus and phase angle, dynamic viscosity), which are performed in the dynamic shear rheometer. At the end of this section, laboratory aging of bituminous binders using method RTFOT and method RTFOT + PAV is described in more detail. In the practical part of this thesis, the results of all tests performed on the binders aged using RTFOT + PAV are introduced and compared with results of properties of non-aged binders and binders aged by 3xRTFOT.
|
|
|
Application of metakaolin in refractory materials
Tvrdík, Lukáš ; Rovnaníková, Pavla (referee) ; Havlica,, Jaromír (referee) ; Kutzendőrfer,, Jaroslav (referee) ; Lang, Karel (advisor)
Refractory materials are irreplaceable in all industrial fields where it is necessary to use high temperatures. This paper deals with the use of metakaolin in refractory materials that allows the operation of such facilities. In recent decades has the development made significant progress in quality parametres, which extended life period of refractory materials in their use and significantly decreased the specific consumption of refractory materials in various technologies. This phenomenon is also called "harakiri effect". At the same time a constant pressure to the lowest prices of products is on the refractory market. Metakaolin seems to be appropriate raw material, which may help to achieve interesting qualitative effects. It may affect many properties of the influence on the behavior of materials during processing, through physico-mechanical parameters and dipping to the economic efficiency of production.
|
|
|
Development and optimization of ointment preparation for burn healing
Müllerová, Kristýna ; Sedláček, Petr (referee) ; Enev, Vojtěch (advisor)
This bachelor's thesis aims to prepare ointments based on an ointment base with the addition of a bioactive component of chlorophyll according to a recipe from an unknow doctor. The basic characteristic of emulsions was performer in the theoretical part, their instability and possible methods of stabilization were described. Furthermore, the reader is acquainted with the bioactive substance of chlorophyll, selected ointments for the healing of burns and wounds and finally with the use in medicine. In the Experimental part, the preparation of emulsion bases of ointment was described. Based on a performed analysis of stability using analytical centrifuge, two ointments bases were selected, to which other components were added – chlorophyll, beeswax, and chamomile extract. The stability of completely prepared ointments was studied at 25 °C and 37 °C, this analysis was performed even after a longer time interval. Using ATR-FTIR spectrometry the present functional groups were identified at prepared ointments, individual components of the ointments base and chlorophyll. Based on the stability measurement of the prepared ointments and rheological measurements (oscillation and rotational measurements), it was evaluated that the best properties were shown by the prepared ointment with an ointment base consisting of 30 wt. % white vaseline and 70 wt. % synderman.
|
|
|
Development of New Application Forms of Humic Substances for Agricultural and Environmental application
Kratochvílová, Romana ; Kráčalík, Milan (referee) ; Salaš, Petr (referee) ; Klučáková, Martina (advisor)
The new forms of superabsorbent polymers (SAP) on the base of acrylic acid were developed and studied in this thesis. The SAP are focused on agricultural and environmental applications. While they are applied to the soil, SAP can prevent water losing and they become a reservoir of humidity in case of dry season, moreover in combination with fertiliser they play role of controlled release medium. Eight various samples of SAP were experimentally prepared by networking of partially neutralized acrylic acid. Potassium peroxydisulfate was used as the initiator and N,N–methylenebisacrylamide as the crossing agent. Some of samples contained addition of second monomer of acrylamide. All of them were enriched by fertilisers – natural lignohumate or synthetic NPK or combination of both. The swelling characteristics of prepared samples were investigated in conditions of various ionic strength. The influence of xerogels’ particles size on swelling properties was also observed. The viscoelastic characteristics of hydrogel form of all SAP were determined by using of rotation rheometer. The changing of viscoelastic properties were studied in dependence on time, on freezing and on repeating swelling cycles. On top of that the controlled releasing ability of SAP was tested due to three modelling experiments. The biological activity of all polymer products was tested at the end of the thesis. All samples of SAP were incorporated into the artificial soil and the ability of the water retention in the soil was observed. The growing experiments were running by using of corn plants. The size and the mass of each plant were measured and branching of the root was objectively evaluated by programme Harmonic and Fractal Image Analyzer.
|
|
|
Polysaccharide gels in medical applications
Svitačová, Denisa ; Kadlec, Martin (referee) ; Venerová, Tereza (advisor)
This bachelor thesis deals with the performance of hydrogels containing polysaccharides, their characterization and reproducibility of the preparation of these gels, which is described in the literature. Based on the research, suitable polysaccharides, namely guar and gellan gum, were selected. Subsequently, an article was selected, the procedure of which was reproduced. Calcium chloride was used as a crosslink agent in the mixture of guar gum and gellan solution. Problems appear in the reproducibility of the article which did not allow the exact repetition of the hydrogel preparation procedure described in the article. Based on the findings, an optimized range of mixtures with various other gelling agents was developed. The individual prepared materials were suitably characterized by rheological tests. Specifically, amplitude tests, the results of which proved the formation of a three-dimensional network in their structure, and thus the formation of hydrogels. Frequency tests were used to determine their mechanical properties.
|
|
|
Utilization of biosurfactants for incorporation of hydrophobic domains into modern controlled-release systems
Nešpor, Tomáš ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
This work deals with the current topic of carrier systems. Since the biggest problem is the passage of hydrophobic drugs through the bloodstream, or through universal body barriers (eg blood-brain), it is necessary to chemically modify these carriers in order to be able to administer hydrophobic substances effectively. Based on a literature search, several systems are designed and subsequently studied, in which there is a presumption of possible use for carrier systems and at the same time they have biosurfactants incorporated in them due to their ability to solubilize hydrophobic molecules. The theoretical part of this work will describe the individual biosurfactants, the process of their production, their physicochemical properties, and the possibility of their use in carrier systems. At the same time, the individual carrier systems, the procedure of their preparation, the possibilities of their use are described, and their advantages and disadvantages are also compared. In the practical part, the screening of both individual substances and their mutual interactions, as well as methods used to study the emerging structures is then performed. The study of molecular interactions is primarily performed using the technique of dynamic light scattering. The next part describes the optimization of hydrogel formation with incorporated biosurfactants in their structure and then the formed gels are subjected to rheological and solubilization tests. The study of the internal structure of these gels is performed using a scanning electron microscope.
|
guest ::
