|
|
Steel structure of an industrial building
Kopecký, Ladislav ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
Industrial hall with storage outbuilding. The length of the hall is 72 meters and width of 30 meters. The main hall has a span 24 meters and the outbuilding has a span 6m. The distance between primary steel frame is 6 meters. The height of the main hall is 10.7 meters and a height of outbuilding is 13.0 metres. The roof is flat with roof slope of 3.5% the main hall and 8.75% outbuilding. The structural system of the hall's bar structure. Primary steel frame is designed as a steel frame rafter with eaves haunch. In the roof structure are designed purlins. The stability of the structure is secured by roof braces and longitudinal braces. The hall is pin-supported on the foundation pad. The hall is clad wall and roof panels PUR. Main hall is equipped with a bridge crane with capacity of 8 tons.
|
|
|
Array of Stell Aggregate Bins
Krchnák, Martin ; Bajer, Miroslav (referee) ; Brosch, Petr (advisor)
This diploma thesis describes the design and assessment of steel structural design of the steel aggregate bins including roofing. The construction has a ground plan of about 33 x 9 m and it is divided into 8 cells bins. Main material is steel, grade S355 and S235. There is developed a static analysis of the main load-bearing parts of the structure, including joints and selected details.
|
|
|
Airport Terminal
Fojtík, Petr ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
My diploma thesis is focused on design and assessment of structural system of airport terminal. The design is processed in two options. Both of them has the same dimensions but structural system is changed. Floor plan is in the shape of part of annulus. Width of the hall is changing, in the middle of the hall is aproximatly 90 m. Length is 52,5 m, 10 m of this length is porch. Roof slope is 3° towards to the front of the hall.
|
|
|
Sports Hall
Zogata, Pavel ; Sýkora, Karel (referee) ; Bajer, Miroslav (advisor)
In my diploma thesis the proposal is developed as supporting steel structure sports hall with dimensions 45 x 54 m, a maximum height of 15.5 meters,for the area of Znojmo. In a static calculation are designed and assessed the main bearing structural components such as solid panel purlins, spatial lattice truss, bracing and solid panel columns, which together with the truss form create a crosslinks, column bases and anchoring, plus Tribune.The work includes the design documentation consisting of a layout drawing, drawing anchoring and drawing selected details.
|
|
|
Steel structure of a military museum
Šašinka, Jakub ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The diploma thesis describes the design and assessment of steel structure of the roofing of the military museum in Králíky. The supporting structure of hall is 40.00 meters span. The total layout are 55.93 x 72.04 m, building height 11.43 m, 16.11 m pylon height. Main construction material is steel, grade S355, secondary constructions are made from steel grade S235, rods are made from steel grade S460. I did optimization of steel structure and chose the best option. For this option I made detailed structural analysis. It is prepared by static analysis of the main load-bearing parts of the structure, including joints and details. The supporting structure of hall consists in the transverse direction from the curved spatial lattice structure made of steel circular tubes which hang on rods on a sloped pylon. Part of the report is open-air roofing.
|
|
|
Museum pavilion in Frýdlant nad Ostravicí
Hýblová, Kateřina ; Hron, Lukáš (referee) ; Pilgr, Milan (advisor)
The submitton of my thesis was to design a load carving structure for the exhibitional purposes of a museum. The plan of the structure is 18 x 30 m with the distance of the main frames of 6 m. The beight of the main frames is variable. The building consists of plate columns and a bent plate-shaped foof girder. The work includes: the validaion of the main structural elements, solution of some chosen details, elaboration of detailed drawings of the used connections (joints).
|
|
|
Cowhouse in Králíky
Nováček, Tomáš ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
Bachelor thesis describes the structural design of the load bearing steel structure of cowhouse located in the municipality Králíky. The structure is designed according to the normative requirements of ČSN EN for ultimate and serviceability limit state. It´s a structure formed by the main frames at a distance of 5 m apart, which are placed in a rectangular plan of 30 x 60 m. As the main material of load bearing elements was used a steel S355. The specificity of the structure is location in a place with above average snow and wind loads. The couwhouse is intended for housing hundred and fifty cows. The work consists of a static calculation, which assessed individual cross sections and joints.
|
|
|
Building of Rubber Production in Odry
Dohnal, Filip ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
The object of this thesis is to design and assess steel structure “of hall for industrial production at Odry. The object has a rectangular shape with dimensions 48 x 56 m, with saddle roof with slight inclination and 10,6m high rooftop. The object is a two-bay hall, the main supporting part is formed by frame ties of two sections from plate profiles, on frames are mounted plate purlins. Longitudinal rigidity is ensured by transverse bracings, the transverse rigidity is ensured by frame ties. The supporting part of the wall and roof cladding is made of sandwich panels.
|
|
|
Reconstruction of the Building for Storage
Heger, Petr ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor)
The subject of this bachelor’s thesis is to design the extension of the steel structure of the storage hall. The task is to double the platform area from 18 x 18 m up to 36x18 m with the height of 7,5 m. It is required to use as much of existing profiles as possible. The structure is located in Znojmo. The original roof structure is made of truss girders with the segmently curved lower girdle. The span of main frame is 18 m and the axial distance of main frames is 6 m. All girders are pinned. In extended structure is used the plate girder. Spatial rigidity of the structure is made by wall and roof bracing. The static calculation of main load-bearing elements including joints and specific details was made for the structure. The technical report and drawings were specified by the supervisor. For design of the structure were used valid standards ČSN EN.
|
|
|
Museum in Moravské Budějovice
Růžička, Tomáš ; Barnat,, Jan (referee) ; Pilgr, Milan (advisor)
The subject of the bachelor’s thesis is to design and check load-carrying steel structure of a single-nave hall. It consists of main frames, whose distance between axes is 5,8 metres. Main frame consists of web-plate columns and a roof truss girder. Ground plan sizes of the hall are 34x40,6 metres and maximum height is 12,72 metres. Designed object is situated in Moravske Budejovice.
|
guest ::
