|
|
Working out of methodology for creation of building information mode
Sládková, Veronika ; Černý, Martin (referee) ; Hanzl, Vlastimil (advisor)
The subject of thesis was creation of methodic for building information modeling methods specified. The buildings were surveyed at first or projects drawing were provided. Processing of survey data and building information modeling was done in software Revit 2014 with program extensions. Subsequently chosen methods of creation were described and they were compared with each other. The result can use for selection the most appropriate method on the basis function and targeted funds.
|
|
|
Creation of 3D model of building using laser scanning
Sabo, Stanislav ; Kalvodová, Petra (referee) ; Kalvoda, Petr (advisor)
The aim of this thesis is to scan the part of the interior and exterior of the Faculty of Electrical Engineering and Communication building using the FARO Focus3D X 130 scanner, and the creation of a 3D model in the WGS 84 system. Subsequently, methods, status and utilization research of this technology and point cloud processing software is provided. The collected data are processed in the SCENE. Three-dimensional model is designed using the Pointfuse and Microstation V8i programs. In the end, the registration accuracy of the scans and the resulting 3D model accuracy are evaluated.
|
|
|
Topographic model of the archeological site Stradonice based on UAV LiDAR point cloud
Prýmek, Jan ; Potůčková, Markéta (advisor) ; Hodač, Jindřich (referee)
The bachelor thesis is focused on the creation of a topographic model of the burial mound near Stradonice. The aim of the work was to filter LiDAR point clouds acquired from an UAV and aircraft platforms over the forested terrain of the area of interest, to analyze them in terms of point density corresponding to the relief and vegetation, to compare visual and automated detection of archaeological objects and to verify the results by field survey. The theoretical part describes the principle of laser scanning, its use in archaeology and the application of automated detection approaches to archaeological objects. Furthermore, the development of barrow burials from the Eneolithic to the Middle Ages is outlined and the area of interest is described in detail. The mound burial site at Stradonice is divided into two parts located not far from each other, which are probably not very closely related. In one part there are both rectangular barrows placed in rows and circular ones which occur irregularly around them as if they were of a different age. In the other part, there are only mounds with a circular plan, and some of them are arranged regularly. In the practical part, three sets of point clouds were processed, two of their own from UAVs and one from an aircraft provided by the ČÚZK. Vegetation was...
|
|
|
The creation building design documentation of the agricultural part of the building in Mutěnice
Hladký, Matúš ; Kratochvíl, Richard (referee) ; Kuruc, Michal (advisor)
The diploma thesis concerns of the creation of building design documentation of the agricultural building in Mutěnice with using building information modelling in Autodesk Revit. Drawings are made normative by ČSN 01 3420 and with using of the results of laser scanning. Text part contains description of whole process, starting with field survey and collecting data, throughout processing of point cloud, ending in modelling of the building and terrain surface and building design documentation creation. The definition and application of BIM on the present is attached to the theoretical part. Main output production data is the building design documentation.
|
|
|
Laser scanning for building information modeling (BIM)
Kocourek, Adam ; Kuruc, Michal (referee) ; Volařík, Tomáš (advisor)
This master's thesis deals with the creation of an information model of a part of a historical building of the rectory in the village of Cetkovice based on a point cloud. The thesis includes creation of geometrically and visually accurate window and door families according to the real-life template, taking into account the benefits of this approach for conservation purposes. In addition to the resulting model of a part of the building, the main outputs of the thesis include visualizations created in the Twinmotion software. This thesis also evaluates practical and economic feasibility of the potential outputs of the model.
|
|
|
The creation of construction drawing documentation of a terraced house in Mutěnice
Pittauerová, Petra ; Kratochvíl, Richard (referee) ; Kuruc, Michal (advisor)
The aim of this master's thesis is to create construction drawing documentation for the main part of a terraced house in Mutěnice based on a BIM model and to create a thematic map in the vicinity of this family house. To create the required attachments, on-site measurements were conducted using geodetic surveying techniques, including GNSS technology, tachymetry, and laser scanning. The key focus of the thesis is to describe the on-site and office work that was essential for creating the necessary outputs. The main output of the thesis is the construction drawing documentation of the main part of the family house at scales of 1:50 (floor plans, sections) and 1:100 (elevations). The thematic map is made at a scale of 1:250 in the coordinate system S-JTSK and the altitude systém Bpv. Due to the owner's privacy protection, the created BIM model is not included in the thesis attachments and will be provided solely to the owner of the family house. The outputs of this thesis represent the actual state as of August 2022 and will serve as a basis for the planned reconstruction.
|
|
|
Monitoring of the building construction using laser scanning technology
Jirásek, Michal ; Bárta, Ladislav (referee) ; Volařík, Tomáš (advisor)
The thesis deals with the use of an alternative approach to stage measurement in the monitoring of a building object by conventional geodetic methods. Monitoring of two retaining walls was carried by terrestrial measurement and terrestrial laser scanning technology. Horizontal and vertical displacements from terrestrial measurements were evaluated. The point cloud of individual stages was conducted into the JTSK reference system. The resulting displacements from TLS and classical measurement were compared. After evaluating the results of both technologies, the thesis contemplates the application TLS technology for stage measurements.
|
|
|
Modelling a rectory building in the Revit program
Chladil, Martin ; Hanzl,, Vlastimil (referee) ; Berková, Alena (advisor)
The main objective of this thesis is to make the construction documentation of the part of the historical building using modern means. Data capture was done by laser scanning with a test of an automatic scan registration and a georeferencing in the field. The building was modelled in Revit as a BIM (Building Information Modelling) model. A certain degree of generalization of shapes and capture of details was used during creation. Subsequently the construction drawings were completed from the model for the customer purposes.
|
|
|
3D model of the observatory in Brno
Ondreková, Mária ; Nosek, Jakub (referee) ; Kalvoda, Petr (advisor)
The aim of this master's thesis is to create a georeferenced mesh model of the southeast object of the observatory in Brno using images captured by a reflex camera Canon EOS 6D Mark II and a low-cost Xiaomi Mi 10T Pro mobile phone camera in Agisoft Metashape Professional software. The accuracy of the model was tested using check points and a reference dense cloud from laser scanning. The 3D model was printed on a 3D printer and published on the faculty's website.
|
|
|
Building Information Model (BIM) visualization capabilities in the Unreal Engine gaming environment
Fučík, Vojtěch ; Kuruc, Michal (referee) ; Volařík, Tomáš (advisor)
This bachelor thesis deals with creating of an information model and subsequent visualizations of sv. Cyril and Metoděj chapel in Brno Bohunice, based on data obtained predominantly by laser scanning. The theoretical part of thesis deals with description of concepts related to an information model and description of methods used for obtaining such data for its creation. The practical part describes the usage of methods for data collection, process of creating the informational model and creation of visualizations. The outputs of the thesis are model and visualizations of the chapel.
|
guest ::
