|
|
Office Building
Marek, Václav ; Ostrý, Milan (referee) ; Struhala, Karel (advisor)
The thesis describes design of an L-shaped two-storey office building in Chotěboř, which can work with saving energy and be careful to nature. Using renewable materials and new technical equipments. At the end of the design, there should be a building that will be architecturally interesting, energy-efficient and use renewable resources. It is a two-storey building, which is designed for office working and one part of building can be used for teaching science. Main roof on administration part has saddle shape, second roof on part which science centre has flat roof. Both roofs are intensive green roof overgrown with plants. For day illumination, there are design French windows with openings parts. Most of the first floor and the whole second floor belongs to offices and auxiliary staff rooms, toilets, etc. First floor also includes a small training centre with one classroom and necessary facilities (toilet, staff room, etc.). The load-bearing structures (foundations, walls, columns, floor and roof slabs, etc.) are designed from cast-in-place reinforced concrete. Load bearing vertical elements are walls, columns, and posts. Part of the first floor exceeding the layout of the second floor is covered with a flat green roof. Second floor is covered with a saddle green roof. All drawings and 3D rendering were done using ArchiCAD software.
|
|
|
Health centre Proficlinic
Růžička, Věroslav ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The subject of my diploma thesis is the processing of project documentation of the construction part for the realization of the new build private health centre Proficlinic in the outskirts of České Budějovice. It is a two-storey partially basement building. On the first floor there is a pharmacy with the preparation of cytostatics, surgery x-ray and facilities for staff. On the underground floor there are technical facilities for new buildings and storage facilities. On the second floor there are individual surgeries and day care center of oncology. The ceilings are made of prestressed panels. The roof of the building is flat single-skinned.
|
|
|
Apartment building
Horn, Jiří ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is the design of an apartment house in Havlíčkův Brod. It is a two-storey, partly basement apartment building on a slightly sloping terrain. The building is detached and its entrance is situated to the north, where there is an existing access road. There are four layouts of the same housing units. The construction system is made of ceramic blocks. The ceilings are made of prestressed panels and the roof is single-skinned. The work contains project documentation of real execution.
|
|
|
Chalet
Chovancová, Andrea ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The aim of this thesis is to design a mountain chalet. Chalet is intended for recreation and accommodation for 23 persons and is designed to gently sloping land in the village of Horní Bečva. The building has two floors without a basement. The main entrance to the building is from the southern side entrance for staff is on the eastern side and the other side entrance to the building is from the north. Part of the building for accommodation is situated on the 2nd floor. Perimeter and interior bearing walls are designed from brick blocks Porotherm in 2.NP then the inner walls of plasterboard. The construction of a roof over the main part of the building is made up of wooden roof purlin system, a roof over your wellness zone is flat vegetation, and the roof over the vestibule is flat with classical music. The main part of the building is covered with a gable roof with a slope of 35 degrees inclinations flat roof over the vestibule wellness zone and 3%.
|
|
|
Detached house in Omice
Koláčková, Michaela ; Dohnal, Jakub (referee) ; Petříček, Tomáš (advisor)
The subject of the bachelor’s thesis is processing of the technical part of the project documentation for the new two-storey house, which is located in the village Omice. The object is situated in a steep terrain, which was used for an architectonic conception of the house – the first floor is from northeast part embedded into the ground. Detached house is roofed by a flat green roof. The main living areas are divided into the social area in first floor and the resting area in second floor. A garage with a storage space and terrace accessible from the living room belongs to the object.
|
|
|
The family house
Moudrá, Aneta ; Janíček, Vít (referee) ; Benešová, Romana (advisor)
The subject of presented thesis is preliminary design of a detached house with workshop, as a design documentation for future building construction. The building is located on sloping land in the village Litohrady and consists of a basement and one above ground floor. The workshop is located on the ground floor. Roofing is solved by warm flat roof construction with an inverted roof assembly. Vertical structure and horizontal load-bearing structures are made out of Ytong system, perimeter masonry of the basement floor is made out of concrete blocks of permanent formwork Best. Construction of the house is based on footings. The main entrance to the house is designed to be in the basement, workshop has its own separate entrance on the ground floor. In the basement there is a living area and utility room with double car garage. The ground floor of the house holds a private zone and workshop. Proposal for the house construction emphasizes the layout design, architectural and construction solutions to energy savings and safety in use.
|
|
|
Family house in a slope
Piškulová, Veronika ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The bachelor´s work deals with a new building of a family house set in a sloping terrain to the extent of the documentation for the building execution. The designed family house is a two-storeyed one roofed over with a single pitched roof. As a part of the building there is a garage for one parking place and a terrace accessible from the second storey. The new building is designed for the 4 – 5 member family.
|
|
|
The Motel near the Novomlýnských ponds
Moravec, Ladislav ; Třeštíková, Jana (referee) ; Berková, Petra (advisor)
Diploma thesis deals with the complex design documentation of newly-built motel near the Novomlýnských ponds with separate buildings. The building is situated near the D52 motorway in the cadastral Perná. The motel is designed for temporary accommodation, eating and recreation. It is a two-storey building with flat roof and without a basement. Besides the main building, there are also four bungalows. The building is designed with traditional building materials. The hotel is desingned for visitors with limited mobility and orientation.
|
|
|
Nursery School
Leupold, Karel ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The master’s thesis on the topic Kindergarten is processed in the form of project documentation for the implementation of the new building. The building is designed to plot 1228/43 in the cadastral Jihlava. It is a two-storey building, the roof is single-flat. The building is of brick masonry POROTHERM. The ceiling structure consists of prestressed ceiling panels.
|
|
|
New Synagogue in Brno
Rubešová, Hana ; Uřídilová, Marcela (referee) ; Dulenčín, Juraj (advisor)
The diploma thesis "New Synagogue in Brno" is processed in the form of architectural studies and containing all requirements in accordance with applicable regulations. The proposed building´s are located between the streets Dornych, Spálená, Přízová and Mlýnská. Object’s are closing city block and completing the look of the street Dornych. The synagogoue was rotated to the west compare to the street line about 17°. Synagogue is a two-storey building without a basement and it´s used only for worships. Jewish Community building is a three story building with three underground floors. The building contains a museum of Jewish culture, kosher restaurants, mikveh ritual bath, library and administration. In the basement is a parking stackers and technical equipment of buildings. Supporting structure is concrete frame construction. Facades are designed like structural glazing system. Part of the processing work was the development of facade section, section thru the diffusing glass and architectural detail.
|
guest ::
