|
|
The footbridge for pedestrians and cyclists
Pupík, Antonín ; Sýkora, Karel (referee) ; Puchner, Josef (advisor)
This thesis deals with the design and assessment of footbridge for pedestrians and cyclists in the city of Hranice, Rybare district. The footbridge will serve as a crossing point over the river Bečva and will conect cycling trail with the street Rybarska. The content of this paper is to propose two different variants of structures. One of these options is selected based on their economic evaluation and further processed. Length of the bridge is 50m.
|
|
|
Multi-storey building
Jetonický, Pavel ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
The subject of the master´s thesis is the design and assessment of the static load-bearing steel structure office building. It is an eight-storey building with a floor plan and dimensions 54x15m. The proposal has three variants. In one of them a steel frame with a hinge attached elements. These are the pillars, beams, trusses, joists and purlins, which are coupled with trapeze plate and thereby secure the stability of the position in the horizontal direction. The steel structure is placed between the reinforced concrete towers.
|
|
|
Office Building
Pospíšil, David ; Mazánek, Pavel (referee) ; Košíčková, Ivana (advisor)
My thesis solveses the office building. The building will be located in Šumperk. It will be located near the center. The building has two floors and a partial basement floor. Ceilings are beams with ceramic inserts and reinforced concrete slabs. Vertical structure consists of a ceramic blocks in the aboveground parts and concrete blocks in the underground section. The roof is walked on vegetation. The staircase is reinforced concrete, monolithic. The entire building is insulated with mineral wool. Basement is insulated with polystyrene foam.
|
|
|
Survey and Assessment of highway D2 Bridge
Výpustek, Libor ; Suza, Igor (referee) ; Cikrle, Petr (advisor)
This thesis deals with the exploration and evaluation of the existing bridge carried him on the highway D2. The work is divided into theoretical and practical parts. The theoretical part focuses on the technical surveys, diagnosis of building structures and some methods of investigation and testing of building structures. In the practical part the visual inspection and diagnosis of disorders of the highway bridge substructures ev. No. D2-058, to determine material characteristics substructure and evaluate the state of the bridge. In conclusion, the practical part of the recommendations for the design and method of repairing the bridge.
|
|
|
Industrial hall
Forman, Radek ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
Two-bay hall for warehouse and manufacturing purposes with supporting steel structure and thermally insulating sheating with width of 36 metres and lenght of 72 metres. The hall incorporates two overhead cranes with maximum load of 32 and 40 tonnes. The main supporting structure is a system of plate girders and beams. The beams are connected with hinges and are placed with intervals of 6 metres. The hall design is intended for 1st snowing area
|
|
|
Structure of the multi-storey of reinforced concrete building
Lochman, Ondřej ; Toušek, Michal (referee) ; Šulák, Pavel (advisor)
The Master´s thesis subject is a design and an estimation of the load-bearing structure of a multi-storeyed building. The structure has a miscellaneous ground-plan shape consisting of three rectangular tracts and it is placed in the building basement under the ground level. The load-bearing structure involves walls and a floor slab which rises up vertically closer to the ground level in the central tract. Among further components being solved belong stairs, basement slab and beam. The load-bearing structure is solved monolithically as steel concrete component.
|
|
|
Pillar jib crane
Procházka, Tomáš ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor´s thesis deals with constructional proposal of jib crane with capacity of load 1000 kg, unloading length of its beam is 2700 mm and lift height 4900 mm. The aim of this thesis is analysis of construction with selection of suitable hoist and control strength calculation of the crane. A part of the thesis is drawing documentation.
|
|
| |
|
|
Technology of laser machining
Kroupa, Jiří ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
This bachelor thesis is focused on present possibilities of laser cutting. The first part describes basic principles of the laser beam, possibilities of ma-chining of various materials and its use in production. Various types of lasers are introduced, including those developed in the last decade. The performance and quality edge that the laser beam can give you is presented in the next part. The practical part compares laser machining with conventional technology of machining. Final results are evaluated in the last chapter.
|
|
|
Strength design of the truss construction
Rašovská, Hana ; Horníková, Jana (referee) ; Vrbka, Jan (advisor)
Bachelor thesis deals with strength, stress and strain analysis of the plain truss construction. The aim of the thesis is calculation the size of forces for two storage of the system with resultant suggestion of the cross- section geometry. The different position of the load is also considered. Further the influence of gravitational field of the Earth is reviewed as well as displacements in characteristic places, in construction is defined.
|
guest ::
