|
| |
|
|
Design of Car Initiator
Suchý, Jan ; Píštěk, Václav (referee) ; Novotný, Pavel (advisor)
The bachelor thesis is focused on proposal solution of automotive initiator construction and design. The proposal is being carried out with regard to the need to ensure the maximum functionality of the whole element. As for the choice of materials and used technology the costs and procedures commonly used today are not being taken into account. The main objective is to eliminate the shortcomings of current automotive initiators and the proposal of technological procedures in the production of a new component.
|
|
|
Reliability assessment of FPM
Němec, Ondřej ; Dvořák,, Ladislav (referee) ; Julínek, Tomáš (advisor)
The topic of this thesis was the evaluation of selected elements of flood control measures, abbreviated as PPO. The aim of this paper was to develop evaluation procedure of PPO and then to apply proposed procedure to a specific location. FMEA (Failure Mode and Effects Analysis) that allows the identification of failure modes, their causes and consequences.was chose as a method for qualitative assessment.
|
|
| |
|
|
Implementation of FMEA analysis in logistics technology Just-in-Sequence
FRANĚK, Václav
The main objective of this master thesis is to design implementation of FMEA analysis in logistics technology Just-in-Sequence at company Robert Bosch in České Budějovice. The operational objective is to define process and product produced by technology Just-in-Sequence. Analyze newly developed technology Just-in-Sequence and compare its advantages over the original method.
|
|
|
Analys of information need as a part of process modeling
Dressler, Adam ; Svatá, Vlasta (advisor) ; Říhová, Zora (referee)
The objective of this bachelor's thesis is to apply relevant knowledge to practical process modeling in a concrete medium size logistic operation, specifically identifying areas where there are "quick wins" possible, with minimum resources required on the part of the organization. The modeling was done in the ARIS Business Architect software. Relevant definitions and literature research are provided to put the modeling approach into context of the extensive literature on process management. The conflict between the optimum and realistic involvement of the organization's employees in creating the models was addressed by a level of detail of the description where the process steps can be documented materially by screenshots in the ERP system (SAP in this case), individual states of the material and information throughout the main process and by stipulations in the contract with the principal customer. This approach creates a risk of inconsistent, albeit detailed and relevant models. Two features address this pitfall: stringent use of the controls provided by the ARIS software to check library of objects (no synonymy or homonymy even when processes are dealt with form different angles at different times) and embedding of the detailed sub process descriptions (input and output of the detailed sub process always connects to the superior level of description). It appears that observing these principles provides for very early practical results from process modeling. It is thus possible to address some immediate concerns of the organization's functions -- management of organizational change, FMEA process, ensuring legal and contractual compliance etc. A section of the thesis deals with evaluating the maturity of processes. A set of criteria is proposed in analogy to the COBIT method of maturity assessment, A sample process is evaluated using this set of criteria The organization under review is part of the automotive supply chain, observing the principles of lean operation -- namely the pull principle. Interesting analogies exist between this principle being observed in the flow of material and handling of information. Instances are being shown where the non-observance of the pull principle creates problems and some solutions in practical process modeling are suggested to overcome these.
|
|
|
Risk Analysis of the Quality System Management
Dorňák, Ondřej ; Hykš, Ondřej (advisor) ; Plášková, Alena (referee)
The Paper is focused on risk analysis of composite bumper Arway S production process. The bumper is produced by Composite Components company for Iveco bus producer. According to discussions of expert team, several types of quality discrepancies were discovered. By using FTA analysis we discovered causes of those discrepancies. FMEA method and Pareto Analysis helped to set most dangerous discrepancies which cumulative seriousness reached 54 %. In discussion, the expert team set corrective action. In parallel with FMEA and Pareto Analysis 8D method was used. It's results were in line with other methods and complete the whole image of the issue. Arway S is a key product and so some of those proposed corrective actions were realized immediately. As a result, the appearance of rejections with specific defect almost vanished.
|
|
|
Failure Mode and Effects Analysis in nursing
HOŠINSKÁ, Petra
The Failure Mode and Effects Analysis (FMEA) is a very important preventive method which enables to determine possible failures and suggest preventive measures to avoid possible failures before they may happen. The prevention of those failures is very important but it is necessary for the Czech medical care providers to change their attitudes and thinking. It is the medical staff who must do their best to provide quality and safe care, otherwise the provided care quality and safety will never be enhanced. The management support is crucial in this respect. When the support is missing, the improved failure prevention on a long-term basis cannot be achieved. The objectives were to examine nurses´ awareness of FMEA and whether nurses use this preventive method in practice. The interviewed nurses and chief nursing officers were asked two research questions: 1) Are nurses informed enough on the FMEA method? 2) Do nurses (use the method in practice? The results obtained are as follows: Out of eight nurses interviewed only one nurse, who had taken part in a seminar focused on this issue, was familiar with the FMEA. The FMEA is not used in nursing process in hospitals in which the research was conducted. The objectives were achieved. Two hypotheses were set: H I: Nurses are not informed on the FMEA method, H II: Nurses do not use the FMEA method. The purpose of this research is to enhance the nursing staff´ awareness of the possible failure prevention. The results of the research will be offered to managements of the hospitals involved in the research with the aim to incite the preventive measures implementation into nursing process. This will lead to the possible failure risk reduction. Both hospitals involved in the research are interested in the survey conclusions.
|
|
| |
|
|
CRM in company Pro Gyn s.r.o.
Duchoslavová, Jana ; Plášková, Alena (advisor) ; Šklíbová, Jana (referee)
My diploma work is about philosophy of CRM which is connecting tools for good quality customer care, insists on propriety and process efficiency, quality of staff and usage of IT technologies for recording all important facts which can have impact on relationship. Because of this is implementation of CRM suitable for health care as well. In my work deal with rules of process funciton CRM to activity of private gynecologist clinic. My aim is improve relation between company and consumer.
|
guest ::
