|
|
Creation of Documentation for construction with design of control and visualisation for luxury house
Doležal, Petr ; Klaban, Jaromír (referee) ; Bátora, Branislav (advisor)
The thesis deals with an intelligent wiring including a control and visualization design for a family house. The goal of the thesis is to create a project of a high and a low voltage wiring for a family house including a design of an intelligent wiring. The thesis introduction describes an intelligent wiring and a comparison with a classic wiring. The next two chapters deal with the most used systems and a detailed description of the selected system Foxtrot. The chapter number 5 addresses the project documentation creation for a high and a low voltage wiring. A performance calculation of a heat pump used for heating is described in the following chapter. The functional program for control and visualization of heating, lighting, shading and security is described at the end of the thesis.
|
|
|
Design of reconstruction of LV electrical installation in HV substation
Vašulín, Jakub ; Mastný, Petr (referee) ; Janík, Daniel (advisor)
The topic of this work covers a theoretical description of project design for reconstruction of high voltage distribution system point. The aim of the work is to prepare material on the level of detail design documentation which covers not only design itself but also a theoretical description of external influences, a discussion of TECOMA Foxtrot system facilities and a characterization of standard specifications for individual types of rooms. Aquired knowledge was used detail project documentation which is an integral part of this work.
|
|
|
Detached House
Michna, Martin ; Smolík, Jindřich (referee) ; Winklerová, Jitka (advisor)
This elaborated is on the theme of "Family House." They work out of the A, B, C, D.1.1 and D.1.3 and Annex no. 6 to Decree no. 499/2006 Coll., On Construction Documentation, as amended by Decree no. 62/2013 Coll. Family house is designed for 4-5 members. Building Plot is located in Uničov and a number 2126/59. It is a two-storey building with a partial basement. In the eastern part a garage, without a basement. The roof of the garage serves as a balcony. It is accessible from one of the rooms on the second floor. The building is covered with a wooden truss. This creates a pitched roof with a covering of corrugated iron. On the south side terrace is partly covered by a small roof hanging on steel rods. In 1PP is lightweight gym, bathroom, food store, inventory, laundry room and utility room where the boiler is located. V 1 NP is a study, kitchen with pantry, dining room and living room and wc. 2 NP serves as the resting part. There is a bathroom, bedroom, closet and three children's rooms. Perimeter, internal bearing and inner walls are made of Porotherm. Only the basement is part of shuttering. Ceiling construction is Miako and beams Pot.
|
|
|
Storage hall
Ščudla, Pavel ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The master´s thesis on the topic Storage hall is processed in the form of project documentation for the realization of the new building. This building is projected on a plot 2828/108, 2828/106, 2828/105, 2828/104, 2828/222 and 2828/107 in the cadastral area Brno – Cernovice. This building is adjoined to the existing production hall and is divided into two parts. This parts are storage and administration. The administrative part has two floors and includes office space and hygienic facilities for own employees. The storage part is determined for storing of plastic products.
|
|
|
Apartment house
Nebáznivý, Tomáš ; Fixelová, Veronika (referee) ; Čuprová, Danuše (advisor)
The aim of this bachelor thesis is a preparation of the project documentation providing information for the construction of apartment building. The apartment building is located in Valašské Meziříčí. The building has three above-ground floors and it is partially basement. An utility room, a storage room and the cellar rooms for the individual apartments are situated in the basement floor. A room for strollers and bicycles is placed on the first ground-floor as well as a cleaning room and the three dwelling units. The second floor and the third floor consist only of the apartments. In the apartment building there are 9 dwelling units. The construction system of the building is designed as a brick house, made concretely of Porotherm brick blocks. Load-bearing peripheral basement masonry is made of concrete blocks of permanent formwork. Horizontal load-bearing structure consist of reinforced concrete monolithic ceiling. The roofing of the building is solved by a warm flat roof made of PVC-P waterproofing roofing foil. The building is equipped with a certified contact thermal insulation system named ETICS.
|
|
|
Proposal of electrical equipment for soaking and drying cores for making castings
Čermák, Jiří ; Hájek, Vítězslav (referee) ; Veselka, František (advisor)
This diploma thesis deals with proposal of electrical equipment for soaking and drying cores for making castings at foundry in a Great Britain. It brings look at system of technical norms ČSN and it compares it with british system of technical norms British standards. The second part of this thesis contains detailed proposal of this equipment, including specification of control system, specification of power supply cables and control cables and particular technological units. The whole project documentation is enclosed as an inseparable attachment of this diploma thesis.
|
|
|
New apartment building
Křičenský, Adam ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is the processing of the design documentation for execution of an apartment building. Designed building is located in Hrochův Týnec. The access to the building is from the south. The plot is flat and it disposes with parking places for nineteen cars. It is a building with three above-ground floors and partial basement that is designed with a total 8 dwelling units. The structural system of the designed building is wall system. All vertical structures are made of clay brick. The exception are external walls in the basement, that is designed of concrete blocks (permanent formwork). The horizontal structures are designed of prefabricated rib-and-filler floor that is made of ceramic concrete ceiling beams, ceramic inserts and overconcrete. The conection structure of the building is the cast-in-place reinforced concrete staircase. The roof is designed as a green flat roof in combination with the walkeble flat roof. The roof above the stairwell is designed as a non-walkeble flat roof. The thermal insulation of the whole object is made of the ETICS certified contact thermal insulation system. The apperance of the building is completed by facade colours that are selected in shades of white, light gray and dark gray.
|
|
|
Pension
Koršala, Martin ; Řezníček, Petr (referee) ; Hradil, Dušan (advisor)
The subject of this final thesis is the preparation of a project documentation for the building construction of a new pension with restaurant and wine cellar. The compound is located in Vážany nad Litavou. Its location falls under Velké Pavlovice area. Due to the location in this wine-growing region is in the project located, a wine cellar with a vineyard. The project is designed as a guesthouse with the restaurant designed for families with children, and for holding small social or company events. For this purpose, is in the main building designed a lounge with capacity of 20 people and a restaurant with capacity of 60 persons. The accommodation capacity provided in the pension is 43 beds. Pension offers background designed for relaxation or wellness stays thanks to the sauna and whirlpool. The building has rectangular plan on two basements and two above-ground floors with a mono-pitched roof facing south. This makes it possible to use solar power from the roof and south-facing facade. Water from the roof of the building is collected in a small pond, which serves as a storage reservoir useful in case of fire and vineyard irrigation. Near the building there are paved and parking areas.
|
|
|
Family residence with two flats in Bystřice pod Hostýnem
Drekslerová, Iveta ; Vokřínková, Lenka (referee) ; Fišarová, Zuzana (advisor)
The target of this thesis work is design of family house with two separate building units on concrete place in Bystrice pod Hostynem. The intention is to create functional disposal solution to take account everyday working. The new building is given for family about four people and one grandparent. The emphasis is given on general visual impression and design. Building is designed from KM BETA construction system with wooden outdoor facing on the part of facade.
|
|
|
Passive house
Majer, Filip ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
Bachelor’s thesis is focused on solving project documentation of new building of Passive building. Emphasis is laid on creating „airtight“cover of house which is achieved accuracy solutions to structural details, suitable selection of building and supplementary materials. An important factor in this issue is the massive use of thermal insulation materials. The project also focuses on the appropriate arrangement of renewable energy technologies and their applications.
|
guest ::
