|
|
Apartment house
Petr, Zdeněk ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
The subject of the thesis is the development of project documentation for building permit apartment building. The building is located on the outskirts of the village Svijany. The terrain is slightly sloping. Near the plot was carried out geological exploration. The foundations are made with concrete passports. Floor plan of the house is rectangular. The house is made of brick masonry technology blocks Porotherm. The house is covered with a gable roof with tin roofs with a slope of 15 °.
|
|
|
Cost Analysis of the family houses
Novotná, Lenka ; Aigel, Petr (referee) ; Výskala, Miloslav (advisor)
This thesis has been written for the purpose of acquiring results which would help a builder with choosing material and construction method with respect to price. The thesis deals with comparison of construction costs when utilizing contemporary materials and using various possibilities of construction itself.
|
|
|
Surveying of the Chapel of the Evangelical Brethren Church in Husinec municipality
Linzmajerová, Jana ; Ježek, Jiří (referee) ; Bartoněk, Dalibor (advisor)
The thesis deals with the surveying of the Chapel of the Evangelical Brethren Church in the town of Husinec, where the exterior end the main room were surveyed. First, the building is presented. Then, preparation work, surveying methods and their processing are described. Next, the process of producing documentation is introduced. The documentation consists of a floor plan, elevations and a wireframe. The following part compares the surveying and the production of the wireframe with and without topological codes in a point list. The last chapter deals with the visualisation of the surveyed chapel. It describes generation of materials and their application, illumination settings and rendering of images of the visualised chapel.
|
|
|
Spiral conveyor
Žádník, Lubomír ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The bachelor thesis deals with the design of a spiral conveyor. In the introduction is presented conveyor theory including its use and description of the basic parts. The following part describes the design calculation and selection of individual components from the specified parameters. Finally, a brief assessment is made. Everything is documented by the drawing file documentation, the list of items, and the assembly drawing.
|
|
|
Cost analysis of building objects
Gregovská, Kateřina ; Zimmermann, Lukáš (referee) ; Výskala, Miloslav (advisor)
The aim of the thesis is to analyse the costs of civil engineering structures in terms of their distribution according to construction or other parts. The first part of the thesis focuses on the cost analysis of sewer lines. The analysis is made on several dozen budgets of real sewer lines, where the technical parameters, economic parameters, parameters on debris generated and costing parameters are compared. From all numerical parameters, the minimum, maximum, average and median values are then evaluated. The next part of the thesis deals with the creation of budgets per 1 mb for excavation in grassed area, road and pavement. The budgets include certain parameters that were found from the previous analysis. The budgets created are then used to determine the change in total cost with changes in excavation depth and pipe diameter. Also, as these parameters change, the labour, the amount of debris removed, backfilling with reused and new soil, and disposal of excavated soil to the landfill are examined. The main purpose is to combine the comparison of all the parameters and find the optimal solutions. In the final stage, the prices of the individual sewer line budgets are compared with the price indicators.
|
|
|
Methods of Machine Tool Thermal Error Compensation
Hanzal, Jiří ; Hermanský, Dominik (referee) ; Minář, Petr (advisor)
Thermal error caused by the thermal deformation is one of the most significant factors influencing the accuracy of the machine tool. This paper presents an overview of the methods of measurement, regulation and compensation of thermal errors. It also deals with the research of research centers and their projects. At the end of the thesis we are dealing with measuring of temperature deviations on machine tools MCV 754 Quick. For the tested machine tool, a methodical proposal of temperature compensation was designed using the grey neural network model with convolution Integral. This paper aims to give a basic introduction of the whole process of the spindle thermal error compensation.
|
|
|
Plastic spur gears
Jordán, Jakub ; Dvořáček, Jiří (referee) ; Venclík, Jiří (advisor)
The bachelor work deals with describe to problems plastic gears and give actual state of knowledges in this section. The work deals with material, constuction and calculation plastic gears. Contains most frequent gear failure this gears and developments apply in mechanical engineering.
|
|
| |
|
|
The Study of Purchasing with the linkage to Production Processes
Svída, Jaroslav ; Adámek, Pavel (referee) ; Jurová, Marie (advisor)
In this diploma work I have attempted to solve problems about managing manufactoring resources in company used in servicing electro-technical production. Problems about manufactoring resources appeared in a time due to a loss of a significant customer when manufactoring resources have became disfunctional. Manufactoring resources reduction policy has been applied in various ways which have led to a significant reduction of a company’s stock.
|
|
| |
guest ::
