|
|
Strengthening of the industry ceiling structure
Neděla, Lukáš ; Požár, Michal (referee) ; Klusáček, Ladislav (advisor)
The subject of my thesis is a strengthening of an industrial ceiling structure. The work consists of a theoretical and a calculation part. The theoretical part defines the structure problems in detail. The calculation part consists of a static calculation and technical drawings. The output of the thesis is the solution for ceiling construction amplification and a demonstration of its correctness and a ca- rying capacity including construction documents.
|
|
|
Roof beam in the industry hall
Šnobltová, Simona ; Bobek, Lukáš (referee) ; Klusáček, Ladislav (advisor)
The bachelor’s thesis deals with the assessment of the existing roof girder in the industrial hall and subsequent outline of strengthening this construction. The girder is located in an industrial hall in Lanškroun and its original design is dated from 1998. Nowadays, cracks appear on the girder, therefore it is necessary to reassess it according to the current valid standards ČSN EN. The girder is appraised for the ultimate limit state, thus for bending and shear, and also for the serviceability limit state, thus for the pressure limit, width of cracks and transformation. Due to the fact, that not all assessments pass, hence a suitable structure strengthening with a MonoStrand prestressing strands is designed and the construction is reassessed again. For the control of a manual calculations of the internal forces on girder, was created a structural model in a program called Scia Engineer.
|
|
|
Construction Technological Project of a Heat Feeder in South Bohemia
Handlíř, Jan ; Hejl, Martin (referee) ; Mohapl, Martin (advisor)
The subject of the diploma thesis is a technological construction project of heat feeder on the hot water pipeline between České Budějovice and nuclear power plant Temelín. The main object is an industrial hall made of steel and brick administrative part. The hall is a steel structure clad with sandwich panels. The administrative part is single-storey building from bricks and has a flat roof. The construction also includes an access road with car park.
|
|
|
Steel structure of industrial hall
Pavlas-Jirásek, Václav ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
The bachelor thesis deals with the design of a main load-bearing steel structure of industrial hall with two overhead cranes. The floor plan dimensions are 24 × 60 m, height of building is 16 m. The main structure consists of pin-supported symetrical truss girders on columns with centre to centre spacing 12 m. The truss purlins are pin-supported on the girders. The columns are fixed in the lateral direction. Spatial rigidity of the structure is secured by system of bracing. The base material is steel of class S355.
|
|
|
Building Construction Project for Industrial and Administrative Building ATX
Šrámek, Jiří ; Liška, Pavel (referee) ; Nečasová, Barbora (advisor)
The subject of this master’s thesis is a solution of chosen parts of building construction project. The project solves industrial hall that contains productions and administrative space. This thesis includes technological regulations for substructure, study of performing the main technological stages, design of using machines, checking and testing plans. Other phrases parts are time schedules, budget, calculations, design of site equipment including engineering report and report for performing access road. Starting materials, which were used for this thesis, were engineering report also including working drawings.
|
|
|
Building survey and evaluating the state of construction
Štěpánek, Jakub ; Komárková, Tereza (referee) ; Heřmánková, Věra (advisor)
This diploma thesis is focused on building survey and evaluating the state of existing constructions. Process of evaluating the state of existing constructions and selected diagnostic methods are described in the theoretical part. The practical part is dealing with performed structural and technical survey of two industrial structures including evaluation of the strength of concrete and verification of the reinforcement. The final part includes assessment of both of the evaluated structures.
|
|
|
Production hall
Londa, Jan ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
This thesis deals with steel structures of industrial building with the arrangements of the building with a span of 18 m, a length of 18 m and a corresponding height of cantilever of a crane track girder is 6,6 m. In the hall are considered two cranes with a capacity of 20/5 t and 32/8 t. The structures is designed for the district of Olomouc.
|
|
|
Distribution warehouses in Prague - construction technology project
Lupač, David ; Selník, Petr (referee) ; Vlčková, Jitka Laura (advisor)
The subject of this thesis is the construction and technological project for distribution warehouses in Prague. Textual part contains a technical report on construction technology project, wider relations of traffic routes with marked critical points, the study of the main technological stages of the building, principles of organization of construction, design of the main building machines and mechanisms, technological regulations, inspection and test plans, health and safety on the site. In the section with attachments there is a map of the locality, drawings of site facilities, including road signs, charts of the movement of machines, the schedule of the main building structure, the budget of the main building structure, a plan for securing material resources, time and financial plan, an economic evaluation of site facilities, details and other technical documentation stages.
|
|
|
Industrial building
Kočí, Petr ; Buchta, Stanislav (referee) ; Sýkora, Karel (advisor)
Bachelor thesis deals with proposal of a load-bearing steel structure of a single-bay hall in accordance with the space arrangement of the building with span of 24 m, length of 63 m and 8,7 m height of a modular crane cantilever. Two bridge cranes are designed with a load capacity of 12,5t and 32/8 t. Essential load-bearing element of the building are transversal frames designed in 12m distance formed by truss girder and solid columns cantilevered at the plane of a transversal main frame. Roof panels are fixed onto the parabolic purlins. Hall is located in the Ustí nad Labem region.
|
|
|
Steel Structure of Industry Hall
Kačírek, Michal ; Balázs, Ivan (referee) ; Horáček, Martin (advisor)
The aim of the bachelor thesis is to design a one-nave steel structure industrial hall in Jablonne nad Orlici with dimensions 63x30m and 15.0 m in height of the structure. In the hall, two overhead cranes with lifting capacity 32/8 tons and 20/5 tons are installed. The roof structure is designed in a variant of saddle roof with truss girder and truss purling with the function of the longitudinal roof bracing. The columns are solid panel fixed to the foundation pad. The main construction material is steel classed as S355. Spatial rigidity of the structure is provided by sway bracing and longitudinal bracing. Roofing is made of sandwich panels with polyurethane foam and trapezoidal sheet thickness of 0.9 mm. It is designed in accordance with the ČSN EN 1993.
|
guest ::
