National Repository of Grey Literature 61 records found  beginprevious21 - 30nextend  jump to record: Search took 0.00 seconds. 
Technological process for part flange
Král, Zdeněk ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
In This thesis the technological process for part flange is compiled. The thesis inculdes analysis of component, material choice and choice of semi – finished product. Two technologies of production have been choosen. The production on the universal center lathe and the production on the CNC lathe. In another charter calculation times are being disscussed. Lastly the technical-ekonomic evaluation is pictured, which contains the comparison between two technologies of production.
Production technology for mechanical seal flanges
Stoklasa, Patrik ; Gregor, Lukáš (referee) ; Zemčík, Oskar (advisor)
The bachelor thesis deals with the current technological process of the mechanical seal flange production. It contains an analysis of all tool and material equipment, the process itself and it describes selected cutting conditions and measuring aids. Variant production of technology is also characterized here, where the applied changes are described and explained in order to achieve lower costs from an economic point of view. Both variants are finally compared and evaluated.
Calculation of heatexchanger
Kvapil, Matěj ; Naď, Martin (referee) ; Klučka, Ivan (advisor)
This bachelor thesis focuses on strength calculation of a heat exchanger according to ČSN EN 13445. First stage is an introduction into the theme of heat exchangers and their calculation. Next part is about the calculation according to ČSN EN 13445 itself. Part of this thesis is also strength analysis of selected items using numerical method (FEM). Annexes include calculation in software Microsoft Excel and basic drawings of items.
Design of Selected Elements of Storeyed Building
Ducháč, Josef ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The Master´s thesis is focused on the assessment basic parts of the story building. All construction is made from reinforced concrete. The columns, flat plate slabs, flanges and stairways are between the design constructions. The thesis includes working-out of static calculation, drawing shape, reinforcement drawing of all design constructions and results from computer sofware.
Formula Student Rear Wheel Carrier Design
Míša, Jiří ; Janoušek, Michal (referee) ; Ramík, Pavel (advisor)
This bachelor thesis is about construction rear upright of Formula Student car using topology optimization. The goal is to achieve higher stiffness with a minimum weight difference compared to last model. Part of this thesis is also a design of the upper flange for changing the wheel camber.
The Production Technology of unrotary part with flange
Přikryl, Zdeněk ; Hušek, Martin (referee) ; Císařová, Michaela (advisor)
Study describes application of forming technology for the production of unrotary parts with flange. The Study considers preliminary technology of forming processes in general. Further includes problems about drawing of unrotary parts with flange from singular to complex shaped. The next part of study includes evaluation of methods of the production belt gear shelter considering product criterias for series production and final accuracy and quality. Following part includes suggestion of the production technology of belt gear shelter using sheet metal forming. In the next parts of the study attends to accurate technological process elaboration of the components, to technological calculations and to project tool configuration. In conclusion the study includes technoeconomic evaluation of propřed technology production.
Optimization suggestions of the loading device.
Kršiak, Oliver ; Foral, Štěpán (referee) ; Varmuža, Jan (advisor)
The thesis deals with the contemporary status of a loading device, specially focusing on its weak points and used materials and a design of a new way of connecting parts of the device. It also concerns the means of sealing each individual parts and the choice of materials with low induction of radioactivity. There are shown and described some ways of connection of pipelines, where this is used, in the thesis. In the thesis there are also described various types of sealants. For proper material application in the reactor enviroment, it was necessary to conduct an analysis of components of chosen alloys and their reaction to slow heat electrons and fast electrons. Based on this analysis and other properties, the right alloys were chosen. In the last part of the thesis, there is briefly included the topic of prolonging devices and the way of meassuring the speed of transport.
The Production Technology of unrotary part with flange
Andres, Tomáš ; Peterková, Eva (referee) ; Císařová, Michaela (advisor)
Bachelor´s thesis describes design of the production of unrotary part with flange made by drawing technology. Produced component is a single cylinder head cover four stroke engine, which is equipped with holes for attachment to the cylinder head and the spark plug hole. The prodiction series is 500 000 pcs per year.The material used for production is deep draving steel DC 04 (ČSN 11305). For the production was designed drawing tool and by the calculating required drawing forces was selected power presss VIVEK MACHINE TOOLS type VPPP - 10 with force 2000 kN. At the conclusion was evaluated technical and economic evaluation of production by seting a tipping point.
Production of "flange" components on CNC machines
Černý, Marek ; Trčka, Tomáš (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis deals with the production of flange type components on CNC machines. The flange function in the tank assembly is described here. The work includes choice of material, choice of semifinished product and proposal of machinery for production. Also, there is a technological process and NC programs for various control systems. Finally, a prototype is produced, which is then evaluated.
Analysis of the material and technological parameters on the insertion of a sealing ring and their optimization
Munduch, Ondřej ; Bothe, Martin (referee) ; Píška, Miroslav (advisor)
This project addresses the issue of pressing sealing shaft ring in the flange. Effect of flange material changes to static leakage between the flange and the sealing ring, the surviving process parameters. An optimal use of process fluids to eliminate leaks.

National Repository of Grey Literature : 61 records found   beginprevious21 - 30nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.