|
|
Apartment building
Světlík, Adam ; Kučera, Radim (referee) ; Struhala, Karel (advisor)
The subject of bachelor thesis is the composition of project documentation of an apartment building at edge of city Bučovice. Apartment building is four-storey building without a basement and is detached building on almost flat terrain, consisting of several parcels, on the cadastral unit of Bučovice. The object is connected to the local road on the north side of the property. Between the object and the communication is parking for the user object, which has 17 parking spaces. The ground floor is divided into the dwelling unit and the technical facilities. Other storeys are divided into the two dwelling units and these units have balconies. The walls are composed of aerated concrete blocks YTONG, in combination with an acoustic internal sand-lime blocks and are based on concrete foundation strips. The celling is reinforced light-weight clay concrete LIASTROP. The floors are heavy floating. The roof is green warm flat roof. The whole object is insulated with contact thermal instulation from mineral isolation MULTIPOR and expanded polystyrene. The drawing part was drawn in AutoCAD.
|
|
|
Mixed-use building
Osička, Jan ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The subject of the this thesis is newly built mixed-use building in gap site in the Brno on the Křenová street. The object will have four aboveground floors and one underground floor. First floor there are officers, specifically hairdresser, pharmacy and establishement of small office. The whole second floor consists of smaller and bigger offices (if it be necessary, it can be connected in one large office divided into two parts). On the third and fourth aboveground floor there are individually flats. There are two flats 4+kitchen, two flats 2+kitchen, four single flats with kitchen and two barrier-free flats. For these flats, there are basement cellar floor. In the underground floor, there are single cellars in the basement for single-room flats, basement for the operation of the building, a cubicle, a drying room, a bicycle room and office storage. There is an overground parking on the northern side of the object. Thanks to the passage of the building from the north to the south side saves your steps.
|
|
|
Mixed-use building
Navrátil, Jan ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The subject of this thesis is a new mixed-use building in the Brno part of Zábrdovice. The building will have one basement and six above-ground floors. In the ground floor will be located store and service of the bicycles and on the first floor there will be smaller space for rent. On the first to five floor there will be eleven flats. The main entrance to the building is designed from the southwest side of Koliště street. In the plot there will be a parking lock system for eleven cars. The access road to the parcel is from the east side. The mixed-use building is designed from a wall structural system. The basement will be made of monolithic reinforced concrete walls, and above-ground floors will be made of clay blocks. The floor structure will be made of cast-in-place reinforced slab. The mixed-use building will be warm flat green roof with extensive greenery.
|
|
| |
|
|
Home for the elderly Ořechov
Koláčková, Michaela ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The subject of the diploma thesis is processing of the technical part of the project documentation for the new three-storey home for elderly with partial basement, which is located in the village Ořechov. The object is situated on a flat terrain, which is situated little bit higher than local road. That was used for an architectonic conception of the house –basement is open and accessible by local road from the north side, the rest is under ground. The detached building is partly roofed by a flat green roof and partly roofed by flat roof covered with gravel. The object is divided into individual areas. In the second and third floor is living and social area. 11 dwelling units of different sizes are designed. First floor is also accessible to the public and together with entrance hall and reception, which is situated in the middle of the object with the main entrance on the east side, there are another two separate areas. The left wing serves as a medical department, in the right wing is cofé with his own staff facilities. In the basement is a utility room and storage areas.
|
|
|
Multifunctional house in Židlochovice
Kubát, Marek ; Gábrová, Lenka (referee) ; Čupr, Karel (advisor)
The subject of the diploma thesis is the elaboration of project documentation for the construction of a new multifunctional building in the cadastral area Židlochovice Židlochovice. The building is designed as a separate, partly barrier-free building with three above-ground and one underground floors. On the first floor there is a restaurant with a capacity of 60 people and there is a café on the second floor, adjacent to a terrace with a capacity of 30 people. It is also located here restaurant facilities, in other parts of the first floor there are three retail outlets with facilities and dentistry with five offices and backgrounds. The second floor is divided into two separate units, where four residential units and a part of the aforementioned café and office premises are located. In the underground floor there is a parking lot with 16 parking spaces and a technical background of the building. The building is based on base concrete and base reinforced concrete floors. The load-bearing structure consists of a brick system made of ceramic Therm-type fittings. The building is roofed with a flat vegetation roof. The drawing part is processed in the program AutoCAD.
|
|
|
Medical center Hlinsko
Pilný, Ondřej ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
|
|
Detached house in Libáň
Kubínová, Veronika ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This bachelors thesis is focused on design of family house in Libáň. It is designed as a detached, two-storey house with cellar under technical part. It will be in service as permanent residence for a family with four members. The roof of the house will be designed as a flat roof with green roof system. Perpendicular constructions are made of Porotherm systems and precast floor slab is made of prestressed concrete floor slab from company Spiroll. The house plan contains also a two-car garage. The project was designed in ArchiCad and 3D model was made in Lumion. All the conctructions are in Czech Technical standarts.
|
|
|
Detached house in Hartvíkovice
Rachůnková, Radka ; Elešová, Klára (referee) ; Jelínek, Petr (advisor)
This bachelor thesis deals with the design and processing of the design documentation for the construction of a new double generation family house, which is located in the cadastral unit of the village of Hartvíkovice on plot no 3478/15. The house is divided into two dwelling units (A, B). The flat A for a four-member family (parents with children) and the flat B for a two-member family (grandparents). The object is designed as a double floor and partly basement. The house is roofed with two mono-pitched roofs that are connected in the ridge and a flat roof with a vegetation. Construction system wall, brick from brick´s blocks, basement is from permanent formwork. The bachelor thesis is elaborated in the form of project documentation for construction.
|
|
|
High standard detached house on a slope
Pavelka, Šimon Václav ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
The aim of this bachelor thesis is to elaborate project documentation of construction of a high standard detached house on a slope. The building is self-standing and is set on a sloping terrain in the cadastral territory of the city of Brno, in the district Žabovřesky. The ground plan of the house is designed in the shape of letter L. One storey is partly in basement, one storey is planted in the terrain and one is above ground. Garage for four cars is part of the building connected to the house by a fire door in the vestibule. The roof is designed flat and vegetative. The entrance to the building is situated from the northern side. Here is also the entrance to the ground which is from the adjacent local road. The construction system is made of reinforced concrete skeleton consisting of columns and beams. The KMB Sendwix panel has a contact isolation system. Horizontal constructions are designed from pre-stressed Spiroll ceiling panels and KMB Sendwix system components. The internal and external stairwells are reinforced concrete, prefabricate. Through the leeward to the basement on the ground floor of the building, we enter the residential part of the family house, but also into the garage and dressing room. From the hall we get to the study, the room with toilet and bathroom. The bedroom are includes with a dressing room, a bathroom and a toilet. Furthermore, there are two symmetrical rooms, each of which has its own dressing room, loggia, bathroom and a toilet. All bathrooms and the hall on this floor are fitted out with roof skylights. The hall, connected by a staircase to the first basement, connects to the corridor that is connecting the living rooms with a technical and also a relaxing part of the house. From the kitchen and the dining room we reach the wine cellar, cellar and living room. The dining room and the living room are connected by a double-sided fireplace, and both rooms have access to the garden. There is also a cinema and a toilet located below t
|
guest ::
