|
|
Indirect air heating
Beneš, Josef ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The master Thesis deals with indirect air heating in air handling units. In the theoretical part of the thesis the categories of heat exchangers are defined according to their positioning in ventilation system, used material and type of heat transfer fluid. To the issue of calculating heat exchanges through heat exchangers and description of different kinds of regulation of primary heat transfer fluid is dedicated a separate chapter. The experimental part of the thesis deals with determining performance of current air heat exchanger at set thermal gradient with various heat transfer fluids. In the calculating part of the Thesis, based on measured values, are suggested two possible solutions for use of technological waste heat. Final evaluation of particular solutions was based on the criterion of efficiency usage and implementation investment costs.
|
|
|
Solutions of inverse problems in the area of material and heat exchangers
Kůdelová, Tereza ; Nechvátal, Luděk (referee) ; Čermák, Jan (advisor)
This master’s thesis deals with the dynamic behaviour of the heat exchangers which is described by a system of differential equations. In this connection, it contains general informations about heat transfer, heat exchangers and their arrangements. The main aim of this thesis is to solve the inverse problem of the antiparallel arrangement and discuss the question of the controllability, observability and identifiability of its parameters.
|
|
|
Severance of raw material flour transportation air
Brzobohatý, Lukáš ; Fatka, Jan (referee) ; Jegla, Zdeněk (advisor)
The dissertation is focused on the applied technical and economic analysis of the influence separation of transport air from raw meal on the economy clinker/cement production, in specific cement production. The analysis is performed on the basis of a detailed understanding and analysis of the function of each component of the technology of cement production, which are affected by separation of transport air from raw meal, mainly the dosing and preheat system of the raw meal. The results of the analysis show a significant effect (impact) separation of transport air on the production costs.
|
|
|
Calculation prediction of characteristic parameters of combustion process
Táborský, Miroslav ; Kohoutek, Josef (referee) ; Jegla, Zdeněk (advisor)
The present thesis is focused on calculation prediction of characteristic parameters of combustion process in combustion chamber which is installed at burners testing laboratory. In the thesis basic theoretical knowledge needed for description of heat transfer in process combustion equipment are given. The Plug Flow Furnace Model is based on this knowledge. This model is used to evaluation of specific heat flux in tube furnaces. In the next step the Plug – Flow model is modified and adapted on the combustion chamber. Obtained results are compared with a measured data. By this comparison quality of this model is assessed.
|
|
|
Improvement of energy supply in industrial process
Pavlíček, Lukáš ; Nerud, Pavel (referee) ; Pospíšil, Jiří (advisor)
The main subjekt of that diploma thesis is an optimalization energetic ekonomy of a bathroom. The ojective is propose suitable resolution for decrease decrement heating and employ outlet heat of burnt gas which are going from steam generator. In the first part of thesis is evaluation inceptive state, inlet and outlet flows of energies. In the next part, there are confront indivudual resolving from technically angle and economically angle.
|
|
|
Selection of suitable fluid flow directions in laminar flow tubular cooler
Krobot, David ; Kohoutek, Josef (referee) ; Jegla, Zdeněk (advisor)
This master’s thesis is devoted to problematic of selection of suitable flow directions in double pipe heat exchanger. First chapter is oriented to the construction of tube heat exchangers. It is also discussed impact of construction solution to the flow character and changing of his process parameters. The difference between parallel and countercurrent flow is also occurred in this parts. The next chapter is focused to the basics of heat-hydraulic calculations of heat exchanger. This also means explanation of ways of heat transfer and heat exchanger function. There are told about specific access to the solving problem of fluid laminar flow. The third chapter is detailed focused to the calculating of heat exchanger. At first is discussed factors, which have impact to the flow character. Next are detailed descriptions of design and controlling calculations, including more alternative ways to solve it. Next chapter exploit those results for deciding, which flow arrangement will be better for given case. Last chapter contain realization and reformulating of process heat exchanger calculating to the program code in Maple. There is also description of used algorithms and operating with them, so any user could be able to work with it. In this master’s thesis are used many examples from attached programs on different parts.
|
|
|
Plumbing Systems for Baking Plants
Hruška, Jan ; Vrána, Jakub (referee) ; Bárta, Ladislav (advisor)
This diploma thesis deals with plumbing systems of baking plants v Modřicích. The first part looks for a solution exchange of heat and using waste energy from bakery owens. There are performed several possiblities of projects for plumbing systems. Project part was worked out in cooperation with technical company wich produces equipment for bakery factories. The solution according to relevant standards
|
|
|
Solution of inverse problems in the area of material and heat exchangers
Kůdelová, Tereza ; Nechvátal, Luděk (referee) ; Čermák, Jan (advisor)
This bachelor's thesis deals with the dynamic behavior of heat exchangers which is described by the system of dierential equations. In this conection it includes a general information about necessary theoretical background especialy concerning heat transfer. Further, it mentions also the basic types of arrangement of heat exchangers that may occur in practice. The main goal is to answer the questions of controllability, observability and identifiability of the parameters obtained by solving corresponding inverse problem.
|
|
|
Design of heatexchanger
Nováček, Filip ; Gottvald, Jakub (referee) ; Nekvasil, Richard (advisor)
The aim of this bachelor thesis is to design a heat exchanger which will be part biogas cogeneration system. This work will be divided into two parts. The first part deals only with the known types of industrial heat exchangers, operation and maintenance. The work is not addressed the issue of transfer and exchange of heat because the thermal-hydraulic calculation was the subject of enter. In the second part is design solution heat exchanger according to given parameters controlling, the calculation of pressure parts of the heat exchanger according to ČSN EN 13445-3 and FEM calculation of the critical parts of a heat exchanger. The thesis is also the drawings forms of the heat exchanger.
|
|
|
Solar system
Tuhovčák, Ján ; Fortelný, Zdeněk (referee) ; Chroboczek, Libor (advisor)
The bachelor thesis describes the issue of the domestic water heating by solar systems and the conditions of this system’s usage, its advantages and disadvantages are mentioned. Part of this paper analyzes the main components of solar system and there is a list of solar panels available on the market. The second part of this thesis deals with specific application of a solar system in the locality of Brno. The concept of the system consists of absorption area calculation, energy balance and the system’s financial analysis. Financial repayment time is interpreted separately for the conditions in Czech Republic and Slovakia. If the government grant is considered in the calculation, the financial repayment time is economically interesting, otherwise it is disputable. The environmental contribution is in every case unambiguous.
|
guest ::
