|
|
5-minutes neighbourhood
Šámalová, Daniela ; Glosová,, Dagmar (referee) ; Menšíková, Naděžda (advisor)
The assigned territory is situated in the City of Brno, in the city district of Židenice. From the west it is limited by the railway track Brno-Židenice, from the east by Koperníkova Street, from the north by Lazaretní Street and finally from the south by Bubeníčkova Street. Its area is approximately 45, 480 m2 which is 4,55 ha. From the urban perspective it is an intensive development in a separated block of the city with a protection zone. Total area is permeated by a few lines for pedestrians. The pedestrian zone provides better permeability of the area and better accessibility of the trade parterre. The buildings connect to surrounding development and respect the density of the integrity of the area. Intensive housing structure is regarded as "the city of short distance". The achievement of high density of housing development combines lots of various functions and relatively small built-up surface. While high-quality environment is preserved, people can find job oportunities in the intensive housing development without the need for transport. For achievement conception of compact city applies space urban planning. The shape of the estate directly impacted the principle of the proposal together with the city planning context of the current buildings. In the protective zone there is established a huge park with water reservoirs. The walk-through trade parterre is filled with many various functions, on its walkable roof is created a semi-public zone with skylights and freely introduced verdure. On the walkable roof there are independent blocks of apartments and public facilities. In the northern and southern corner are located public-service utilities and in the middle of this area there is a nursery and a kindergarden. In structural terms the building it is about cast-in-place concrete reinforced frame based on a white concrete foundation which has one underground level and five above-ground levels.
|
|
|
Multifunctional buiding Dělnická
Horňáková, Veronika ; Velecký, Pavel (referee) ; Utíkalová, Ivana (advisor)
The subject of diploma thesis is processing of the desing documentation for new multifunctional building in the street Dělnická, cadastre unit Komín, Brno - Komin. The building is a 3 floors and one underground floor and is designed as a last building in the street on the nearly flat land. In the building is located non-residential space, dwelling units and studios. Non-residential space comprise seven parking spaces in a public underground garage, two stores barrier-free solution with the facilities and two studios 1 + 1. The residential part has two dwelling units 1 + kk, two dwelling units 2 +1 and two dwelling units 4 + kk. The building is based on a waterproof concrete structure "white tub". The vertical structure is built of clay blocks Porotherm, horizontal structures are cast-in-place reinforced concrete. The exterior building envelope is completed with thermal insulation. An internal staircase is cast-in-place reinforced concrete. The entrance to the garage for cars is possible by Autolift. The building is roofed with warm flat roof. The drawings are processed in AutoCAD software visualization are processed in Sketch Up
|
|
|
Foundation of tall buildings
Kubínek, Michal ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
The diploma thesis describes design and assessment of foundation of tall building. Existing reinforced concrete slab-pile foundation structure was assessed as unsatisfactory at the ultimate limit state. Design of two new options was processed: slab-pile foundation with adjusted slab thickness and slab foundation without piles. Both options were assessed at the ultimate limit state and the serviceability limit state. Foundation options were designed as water-impermeable structure of white tank and meet requirements for this type of structures.
|
|
|
Construction technology project of polyfunctional building in Rosice
Pelc, Miloš ; Novotný, Michal (referee) ; Diaz, Yvetta (advisor)
The thesis deals with construction technology project of polyfunctional building in Rosice. The parts of the thesis are the construction technology study, the assessment of transport realations, the proposition of mechanical composition and occupational health and safety (OHS/OH&S). The thesis also contains technological regulations for flat roof and white tank and control and test plans for them. There is also itemized budget with time schedule of structural work. Thesis also deals with comparison of damp proof membrane and waterproof concrete.
|
|
|
Apartment Building in Komarov - rough substructure
Kaláb, Ondřej ; Dvořák, Miloslav (referee) ; Biely, Boris (advisor)
The aim of the bachelor thesis is construction - technological solutions rough substructure of residential house on the street Kovářská in Brno - Komarov. The main parts of work is proposal workflow, mechanical assemblies, itemized budget, the construction schedule, building equipment, inspection and test plan, transport relations of the construction site. One of the main part is the foundation of the construction technology using "white bath", together with settlement development near of the Brno city center.
|
|
|
The possibility of using admixtures for waterroof concrete
Roháček, Lukáš ; Voves, Jiří (referee) ; Hubáček, Adam (advisor)
Bachelor thesis is mainly focused on additions, that have impact on water impermeability and other properities of fresh and hardened concrete. This issue is also described in short section, which is took from foreign reaserch. Thesis further discusses about the standards and regulations that determine, what properties should have waterproof constructions. Experimental part is showing influence of fly ash, slag and silica fume on conzistency, hydratation heat development, strenght, water impermeability, frost resistance and volume changes of the concrete.
|
|
|
Waterproof concrete structures and regulations for the design and implementation
Křenek, Daniel ; Brožovský, Jiří (referee) ; Hubáček, Adam (advisor)
This thesis covers the issues of design, production, and property testing in regards to waterlight concrete structures. The testing conducted on the properties fit in accordance to the Czech Republic and international regulations. This thesis covers the issues of design, production, and property testing in regards to waterlight concrete structures. The experimental part focused on the design of the concrete mix, which stems from previous knowledge of individual, and speific regulations. Various types of cement were particularly examined along with studying the effects of admixtures that were partially replaced by cement with propoerties of watertight concrete
|
|
|
RC load-bearing structure design of car park
Kudrna, Jan ; Perla, Jan (referee) ; Šimůnek, Petr (advisor)
The diploma thesis deals with the design and assessment of reinforced concrete structure supporting two-storey building of the underground garage for cars. In the space above the garage is designed open area with public space. The project was designed especially outer water-impermeable construction method white bath and a base plate and a perimeter wall. The structure was designed as a comprehensive model. Computing analyzed by finite element method. All selected elements were assessed at the ultimate limit state and limit state, namely to limit state of cracking load and forced stress.
|
|
|
Construction technology project of The polyfunctional house Eastgate, Brno
Brabec, Josef ; Čech, Václav (referee) ; Venkrbec, Václav (advisor)
The aim of this diploma thesis is the building-technological solutions of gross structure Multifunctional file EASTGATE Brno. This multi-functional file is divided into objects Z and Y. This thesis solves the construction of gross substructure and gross superstructure object Z and gross substructure object Y. It deals with the most optimal propsal of technological procedures, working machines, itemized budget, time schedule, check and test plans, equipment of construction site, assessment of lifting mechanism and last but not least closer transport relations. The thesis is prepared on the basis of technical documents submitted by the designer.
|
|
|
Load-bearing reinforced concrete construction
Klajba, Daniel ; Hasala, Ivo (referee) ; Šulák, Pavel (advisor)
The aim of diploma thesis is to design monolithic reinforced concrete underground structure, which is partly under existing building and partly will form the basis of a new outbuilding. Structure is designed as white tub, whitout any additional isolations against water a ground humidity. All structure elements (slabs, walls, beams) was designed according to standard ČSN EN 1992-1-1 for ultimate and serviceability limit state. Structural analysis was performed using Scia Engineer 2013 – Student version. The results were validated by simplyfied manual method.
|
guest ::
