|
|
Driven roller conveyor
Pokorný, Pavel ; Kašpárek, Jaroslav (referee) ; Pokorný, Přemysl (advisor)
The thesis describes design of driven roller conveyor for transport products on Euro pallets of a total maximum weight of 600kg. The design includes determination of the respective sizes, capacities and strength, as well as design of a support frame and final strength control in the most affected areas. The thesis also contains documentation with drawings of complete conveyor, section of the conveyor and last section of the conveyor.
|
|
|
Centrifugal bucket hoist
Caletka, Tomáš ; Kašpárek, Jaroslav (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with an engineering design of a centrifugal bucket elevator with transport height 6.5 metres and transport performance 40 000 kilograms per hour. The thesis focuses especially on a functional calculation of the elevator thanks to which a gear motor, band and bucket are chosen. This is followed by an analysis of a constructional solution with a strength check of a drive shaft and parallel keys as well as a calculation of a service life of bearings. Technical documentation according to the task is attached to the thesis.
|
|
|
Bucket elevators
Žák, Zdeněk ; Jonák, Martin (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the transport equipment using as the main transport element buckets. To specify this is a device type of elevator, conveyor, digger and excavator, including companies producing these devices. Further work is focused on theoretical and technical approach to calculate where the theoretical part of the thesis deals with the mathematical expression shape layers and logarithmic spiral and in the technical part calculations required to design and determine the parameters of devices. The last section is an overview of transported materials.
|
|
|
Centrifugal bucket hoist
Kotačka, Petr ; Malášek, Jiří (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with bucket elevator design for transport of dry, loose and non abrasive materials according to given parameters. In the introductory chapter a short search describes the concept of suggested solution. Functional calculation, designs and checks of individual proposed equipment elements are stated in the other chapters. In the design requirements for centrifugal bucket discharge as well as miscellaneous way of filling are preferred. Appropriate drawing documentation is enclosed with this thesis.
|
|
|
Design of lift positional table
Bartel, Jindřich ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
Bachelor thesis deals with the design of lift positional table with pallet feeder for transporting loads weighing 1500 kg. The main scopes of the thesis are functional calculations lifting actuator, pallet feeder actuator and determining the main dimensions of lift table. Appendix contains the plan of lift and table frame.
|
|
|
Bucket hoist for grain transport
Valouch, Radek ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
The bachelor thesis deals with a construction design of a bucket elevator for grains in accordance to assigned data. In the first chapter, a conception of a proposed solution is introduced. Other chapters focus on a functional calculation, design and checking the individual components of the device. The requirements for centrifugal emptying of buckets and a mixed filling of buckets are taken into account in the design. A drawing documentation is enclosed with the thesis.
|
|
| |
|
|
Conveyor Inverter - Design Lifting Mechanism
Zálešák, Martin ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
I am concern with a proposal of conceptual solution of Conveyor Inverter in my bachelor work. This Conveyor Inverter is used for the change of the direction europallet about 90° between roller and chain conveyor according to given technical parameters. My bachelor work contains complete 3D proposal, constructional and functional solutions which are based on checking calculations. Lifting of the Conveyor Inverter is done using a leverage mechanism of electric motor.
|
|
|
Horizontal driven roller conveyor
Sláma, Jakub ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with design-driven horizontal roller tracks for the transport of steel castings in the interoperation internal transport, was made functional calculation of the roller track and determined the main dimensions of lines, the work deals with designing the drive, strength calculation poháněcího chain and check the frame lines. Subsequently, the preparation of its finished drawing lines, assembly lines and drawing section drawing of the drive subassembly lines.
|
|
|
Conveyor with clamping and measuring
Polák, Aleš ; Koutecký, Tomáš (referee) ; Dvořáček, Jiří (advisor)
The first profile of the thesis describes current methods of segmenting and measuring of aluminium profile and analysis of a specific roller conveyor with a measuring device for feeding aluminium profile to a high-speed circular saw. The second section is focused on designing a new conveyor with clamps for feeding aluminium profile and designing measuring equipment based on the analysis in the first part.
|
guest ::
