|
|
Automation of layoutplanning
Pavlíček, Michal ; Zemčík, Oskar (referee) ; Hlavenka, Bohumil (advisor)
This thesis deal with suggestion of program, which channelize technologist-planner whole tasks which are unit with projection. Deal with capacitive calculation methods and technology projection methods. This methods were implementing in program Excel and AutoCAD. It was reaching configurational guide in html format, which unit whole section of program.
|
|
|
Design of Single Cylinder 4-stroke SI Engine
Číž, Petr ; Rasch, František (referee) ; Rasch, František (referee) ; Svída, David (advisor)
Thesis deals with design of the experimental single-cylinder spark ignition engines for research purposes. The main purpose of this work is the design crankcase. Summary of possible constructions of spark ignition engines is included. Basic dimensions and 3-D design of the experimental engine resulted from the summary. The numerical analysis of proposed crankcase in ADAMS (MBS) and ANSYS (FEM) software environment is also part of the work. Generally, the proposed solution of the experimental engine was focused on the universality and simplicity of the design.
|
|
|
Person Identification
Svědiroh, Stanislav ; Honec, Peter (referee) ; Richter, Miloslav (advisor)
This thesis focuses on the person identification based on faces. The aim is to create a working solution of person identification for the authentication purposes utilizing the Microsoft Kinect v2 sensor. It contains a summary of the most used algorithms for facial data description and their comparison. Thesis also proposes a PC program that controls the sensor and collects the facial data, saves them, manages keypoint detection and their comparison.
|
|
|
Controlling of programmable analogue circuit
Sobotka, Josef ; Hanák, Pavel (referee) ; Vrba, Kamil (advisor)
This work deals with the design of the control software for the programmable analog circuit adjustable by means of a computer via the serial interface for the computer, as well as for programming the microcontroller. In addition, analyses the internal structure of programmable analog circuit on which it is proposed to further control, design of printed circuit boards for final programming and test equipment and measurement of the basic parameters of the circuit (transmission and phase frequency characteristics of parts and units).
|
|
|
Information System Assessment and Proposal of ICT Modification
Hruška, Milan ; Novák, Lukáš (referee) ; Koch, Miloš (advisor)
The content of this diploma thesis is an analysis of the current information system and a proposal for possible system efficiency. The work is divided into three parts. The first is focused on the theoretical starting points explaining the basic concepts used in the diploma thesis. The second part includes company introduction and the analysis of the information system. Based on the analysis of the information system is the last part, which contains the proposal for improving the information system of UXA spol. s r.o.
|
|
|
Statistical Sampling Techniques in Carrying Out Financial Audits, and Computer Support Processing
Šimák, Roman ; Michálek, David (referee) ; Novotná, Veronika (advisor)
This Bachelor’s thesis describes statistical sampling techniques in carrying out financial audits. The first part is dealing with theoretical description of an auditor’s work, which on the basis on statistical sampling method is making a financial audit. The second part is dealing with the description of a computer program in which is auditor making a financial audit. There in the second part are also being described the current program options along with the statistical methods used in program. The end of thesis contains comparison with competition and economic evaluation.
|
|
|
A Design of a Portion of Web Application for Overhead Cost Calculation
Florians, Patrik ; Luhan, Jan (referee) ; Neuwirth, Bernard (advisor)
Subject of this thesis is to design a web application for overhead calculation, whose purpose is to be a substitution for presently used solution, which is considered to be deprecated. This is being done as a part of strategy of SAP SE corporation for which the solution is designed. This ambition to develop and improve cloud portfolio of already existing applications of the company should lead to betterment of already existing applications of this type and in a long run an improvement of the company’s market position as well as it’s products. The thesis is divided into 3 parts. It begins with a description of theoretical concepts, tools and principles, which are then utilized in further chapters. The following chapter analyzes current state of the affairs, where it is illustrated, what the current solution looks like along with key parts of it. The final, 3rd chapter is dedicated to a description of implemented solution and it also closely describes key differences mentioned in chapter 2.
|
|
|
Programme for channel coding demonstration
Závorka, Radek ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
The main subject of this thesis is creating a programme, used for channel coding demonstration. This programme will be used for teaching purposes. The programme contains various codes from simple ones, to those which almost reach Shanon’s channel capacity theorem. Specifically these are the Hamming code, cyclic code, convolutional code and LDPC code. These functions are based on theoretical background described in this thesis and have been programed in Matlab. Practical output of this thesis is user interface, where the user is able to input information word, simulate transmission through the transmission channel and observe coding and decoding for each code. This thesis also contains a comparison between individual codes, concerning bit-error rate depending on SNR and various parameters. There is a computer lab with theoretical background, assignment and sheets for convenient accomplishment of each task.
|
|
|
Automated Checking of PC Status
Hodáň, Ján ; Řezníček, Ivo (referee) ; Zemčík, Pavel (advisor)
This thesis describes the design and implementation of automatic control of computer visualization. At the beginning computer control will be introduced. Familiarization with computers control procedures will take the place. Subsequently, another methods that can apply the control will be introduced. The main part of the work will be devoted to describe the basic skills that related to computer control. The last chapter will explain how visualization is implemented and how we evaluated the success of visualization. Result of the work is an application that visualize process and thanks to that control will be easier, faster, improved and automated.
|
|
|
Control system for glue dispensing application model
Šimurda, Jan ; Hynčica, Ondřej (referee) ; Fiedler, Petr (advisor)
This thesis addresses the problematics of automated mini-doses application of the adhesive. In thesis are summarized the parameters and types of adhesives with regard to the suitability and the basic theory of bonding. At the same time are summarized the available technologies and methods of bonding. Part of the work is the analysis of requirements for automatic microdosing, in terms of management, delivery system, manipulator, mechanics, functional safety. It also includes the selection of suitable components. The thesis contains the development and description of the control software, visualization, data acquisition, management of robotic manipulator, functional safety logics and dispenser management. The outcome of the thesis is a functional device according to the proposed 3D model made of borrowed components on which algorithms are tested and functionality was verified. In the conclusions are described the complementary features ensuring the possibility of setting the device up in the industry.
|
guest ::
