|
| |
|
|
Fireplace for heating
Kalousek, Lukáš ; Baláš, Marek (referee) ; Lisý, Martin (advisor)
The main topic of thesis is a measurement realized on the fireplace-insert. Thesis is consists of three parts. First part is focused on wood combustion and overview of fireplace-inserts construction. Second part contains the description of fireplace-insert Bety and accomplished construction changes. Third and main part is consists from measurements, calculations and finally assessments of measurement´s configurations.
|
|
|
Effect of operating parameters of the boiler on presence of fine particles in flue gas
Košťál, Jan ; Poláčik, Ján (referee) ; Pospíšil, Jiří (advisor)
This diploma thesis is devoted to the issues of the formation of fine particles in dependents on the combustion parameters. The first part of thesis is review, which summarized the information about combustion process and about formation of the gaseous products and fine particles inside them which created during combustion process. The main content of thesis is realization of measurements of fine particles from combustion, in several types of the tested combustion devices. Next part is a description of used measurement devices, which used for measurement. Last chapters are focused on evaluation of results from the measurements, comparison of the measurements between themselves and the finding the existence of the dependence of the formation of fine particles on operational parameters of boiler. And all results are evaluated in the conclusion.
|
|
|
Energy use of biomass
Musilová, Petra ; Brázdil, Marian (referee) ; Baláš, Marek (advisor)
The objective of this bachelor’s thesis is a research study of biomass use in energy industry with main focus on electric energy production. This thesis primarily concerns with biomass properties, biomass processing technologies and the application of such technologies in the Czech Republic. The first part of this work consists of biomass definition and its division. The next part deals with biomass energetic properties and following is a familiarization with cogeneration (the combined use of heat and power to create electricity). Furthermore this thesis analyses individual technologies used in electricity production. The last part focuses on heating plants, power stations and biogas plants, which use biomass and on charting these specific units in the Czech Republic.
|
|
|
Hydrogen as a fuel in combustion processes
Friedel, Petr ; Brummer, Vladimír (referee) ; Vondál, Jiří (advisor)
First part of the bachelor’s thesis is focused on hydrogen as a fuel. Research was made from basic information about hydrogen, manufacturing processes, problems during storing and transporting. Another part of the research is focused on usage of hydrogen in energetics especially in combustion processes. Second part of the thesis describes modelling of chemical reactions. In this part is also composing software for chemical kinetics simulations. Combustion process of hydrogen and fuels enriched by hydrogen is simulated and described by this software.
|
|
|
Ideal cycles of internal combustion engines
Marušák, Ondřej ; Jedelský, Jan (referee) ; Štětina, Josef (advisor)
The thesis set out the basic thermodynamic circulation and their properties. For these orbits are shown ideal cycles gas engine and diesel engine, in which investigating thermal efficiency depending on the change in their characteristic parameters. The results are reported in tables and diagrams. For each of the engines is also a table with most values the compression ratio, the final compression pressure, the final compression temperature and maximum combustion pressure. Finally, we compare the thermal efficiency of the two orbits in the T-s diagrams.
|
|
|
Impact of Biomass Storing on Heating Value
Černý, Michal ; Špiláček, Michal (referee) ; Lisý, Martin (advisor)
The main aim of my bachelor´s work is the experimental verification of the landfill impact on the parameters biomass. The first part deals with definition, the formation of a basic biomass division. In the next section we find the issues concerning the burning, fuel composition and emissions during combustion. The last part deals with the influence of climatic conditions on the biomass degradation. In the experimental part were measured calorific calorimeter. The result was that, after a measured period of five months to avoid significant degradation of the fuel.
|
|
|
Energy use of biomass
Bouchner, Michal ; Špiláček, Michal (referee) ; Baláš, Marek (advisor)
The aim of this bachelor thesis is research of technologies for energy usage of biomass with concentration to production of electricity. In the first part of thesis are analyzed and described technologies producting electricity. In the second part are described suitable types of biomass for each aplication. Following part deals with used aplications for production of electricity in the Czech Republic. Last part shows specific technologies used in the Czech Republic.
|
|
|
Re-design of biomass boiler for very wet fuel
Zbořil, Martin ; Skála, Zdeněk (referee) ; Lisý, Martin (advisor)
The aim of this thesis is to calculate the stoichiometric balance of boilers and boiler fuel for normal monture to 60%. Determine the monture, content depending on the conditions of the fuel in the combustion chamber and conditions of combustion. Experimental analysis of the current state of the boiler ZKG measurements using this device and propose modifications and solutions.
|
|
|
Energy use of waste
Lachman, Jakub ; Kracík, Petr (referee) ; Baláš, Marek (advisor)
The bachelor’s thesis deals with the Waste-to-Energy topic. The first part evaluates municipal solid waste (MSW) as fuel, analyzes the influence of its indiviual fractions on the overal properties, mainly the lower heating value, compares MSW with other conventional solid fuels which are thermally used. The second part of the thesis deals with Waste-to-Energy technologies. It is divided into three parts: combustion, pyrolysis and gasification. Each contains both the description of the process itself as well as the description of the applied technology. The last chapter contains some of the negative impacts of Waste-to-Energy technologies and a list of measures used to deal with them.
|
guest ::
