|
|
Volumetric Efects Accelerated on GPU
Kubovčík, Tomáš ; Tóth, Michal (referee) ; Starka, Tomáš (advisor)
This thesis deals with simulation and rendering of fluid based volumetric effects, especially effect of fire and smoke. Computations are accelerated on graphics card using modern graphics API with motivation to achieve realistic visual results as well as physically correct calculations. Implemented volumetric effects are distributed as dynamic library which allows addition of these effects to existing applications.
|
|
|
Radiotherapy
Šipka, Petr ; Janoušek, Oto (referee) ; Kolářová, Jana (advisor)
The goal of this thesis is to familiarize readers with the basics of the problem of electromagnetic and ionizing radiation, with its effects on a biological tissues and with types of ionizing radiations used in a therapy. It deals with a medical procedures in therapy planning and with procedures during therapy itself. Part of this Bachelor’s thesis is an application Radiation Calculator processed in MatLab software. Application is modeling the resulting radiation field while setting various parameters.
|
|
|
Engineering solution of photovoltaic power station
Gajdošík, Ivo ; Sobotka, Jiří (referee) ; Míča, Ivan (advisor)
This thesis deals with the usage of solar photovoltaic panel production of electic energy. First part focuses on solar radiation alighting the Earth, respectively the area of Czech republic. Next part covers a development of photovoltaic from the very beggining til nowadays, it describes its spread in the world and the area of Czech republic. Then a reader us introduced to physical principles that work inside solar cells a one single chapter desribes individual parts of photovoltaic power station. Next chapter is dedicated to a model study of photovoltaic power station devided in two alternates- with stacionary placement of panel and placement on trackers, where after a market research, there is a whole technical solution designed and economical and delivery balance is calculated. At the last part there are described main directions of development in the field of usage of solar energy for electric current production.
|
|
|
Algorithm for Calculation of Radiation View Factors
Bílek, Tomáš ; Hlavička, Rudolf (referee) ; Čermák, Libor (advisor)
This thesis deals with a calculation of radiation view factors. The thesis includes mathematical model of the problem and its numerical solution. The main aim of the thesis is the creation of an algorithm for calculation of radiation view factors for given 3D geometries and its application for the heat flux analysis. CAD models of geometries, specified by a NASTRAN file format, are used as an input of the algorithm. Matrix of radiation view factors serves then as an output of the algorithm. The algorithm is programmed in MATLAB, but STAR-CCM+ is used for the NASTRAN specification of separate models. The algorithm is also designed for a computation on a computer cluster for cases of intricate geometries with consideration of shading areas.
|
|
|
Simplified modelling of tube bank heat exchanger in CFD
Cacková, Tereza ; Juřena, Tomáš (referee) ; Vondál, Jiří (advisor)
The master thesis deals with the replacement of heat exchanger surfaces during simulations in the ANSYS Fluent. The aim of this work is to find a simplified model of the heat exchanger usable for flow simulations in large process and energy units, where it is not possible to model the entire heat exchanger in detail. The calculation procedures are applied to „tube bank” heat exchanger. The master thesis is divided into three parts. First part deals with pressure losses. The "porous zone" approach is used as a replacement for the heat exchanger surface. In the second part, the heat transfer by convection and conduction through the heat exchanger is replaced by the "Heat Exchanger" module. The third part examines the influence of material properties, heat source and fixed temperatures on incident radiation. All calculations resulting from the methods are performed using a script that prepares the output data in format suitable for insertion into ANSYS Fluent. A simplification, which faithfully replaces a fully modeled heat exchanger, has been found in all three parts of the thesis.
|
|
|
Iinfrared thermography and handheld ultrasound doppler during exercise test
Urbanová, Lucia ; Vlk, Daniel (referee) ; Staffa,, Erik (advisor)
Semester project elaborates theoretical part of bachelor thesis, which is going to process results of measurements performed by infrared thermography and Doppler ultrasonography during physical tests on volunteers. The theoretical part contains basics of infrared thermography, where physical quantities, laws and principles are explained. The basic of Doppler ultrasonography are explained as well. In practical part will be statistically analyzed data measured by a thermal imager and Doppler ultrasonography. Study group of people will form students aged from 18 to 25 years. Thermographic and Doppler measurements will be performed before exercise and after exercise. The aim is to find a correlation between processed data.
|
|
|
Thermal calculation of direct fired heater
Sénáši, Martin ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
The main aim of the thesis is to evaluete properties of a simplified thermal calculation of the direct fired heater published in the journal Applied Energy at 2010 and its application to specific industrial cases. At first, general issues of process heaters are talk over. Second, calculation model in cited article is briefly introduced. After that, custom computational model at program Maple is created in accordance with published article. Subsequently, the model is applied to the existing process furnaces in the form of a check calculation. An integral part of the work is also a detailed discussion of the results obtained.
|
|
|
Analysis and assessment of risks in the construction of the shielding structures of medical irradiators.
Henzelová, Iveta ; Vymazal, Tomáš (referee) ; Hobst, Leonard (advisor)
The thesis focuses on the analysis and evaluation of the potential risks in the design and implementation of shielding structures against the effects of ionizing radiation. The rocedure of calculation and design optimization, according to the current wording of the Atomic Act and related regulations, is mentioned only marginally. According to DIN EN 31010: 2011 Risk Management - Risk Assessment Technique risk assessment were made by risk analysis. risk analysis. Risk management identified these methods - Analysis of the Causes and Consequences (Ishikawa diagram), Analysis Failure Mode and Effects (FMEA) and the Pareto diagram. These methods are implemented to identify and evaluate the associated risks. Based on the identification and assessment of these risks, appropriate measures are then proposed to reduce their impact.
|
|
|
Control unit for CubeSat
Horký, Jan ; Šulc, Tomáš (referee) ; Kubíček, Michal (advisor)
Cílem práce je návrh univerzální řídicí jednotky pro CubeSat založené na obvodu FPGA. Taková jednotka doposud nebyla komerčně dostupná a navržená jednotka má tak dobrý potenciál zaplnit příslušné místo na trhu komponent pro CubeSat. Celá jednotka je navržena z komerčně dostupných komponent. Návrh jednotky je proveden tak, aby umožnil její funkci ve vesmírném prostředí. Stav konfigurace FPGA je pravidelně kontrolován a v případě zjištěné chyby dochází automaticky k rekonfiguraci FPGA a návratu jednotky do výchozího stavu. Jednotka obsahuje sadu senzorů, které monitorují její stav a v případě potřeby je možné na základě jejich výstupů provést opatření z hlediska ochrany funkce jednotky. Dvě paměti MRAM umožňují uložení tovární a uživatelské konfigurace FPGA, mezi kterými dochází k automatickému přepnutí na základě korektnosti uživatelské konfigurace.
|
|
|
Gamma Radiation Measurement
Lázna, Tomáš ; Jílek, Tomáš (referee) ; Žalud, Luděk (advisor)
This thesis is focused on detection of ionizing radiation, especially gamma radiation. In its theoretical part the issue is presented and the most common detector types (gas filled, scintillation and semiconductor detectors) are analysed. In its practical part the parameters of the chosen sensor HDS-100GN are verified with a focus on its capability of dynamical measurement. The robot Orpheus-X3 equipped with the precise RTK-GNSS receiver was used in the realization of the experiment. The analysis of the measurement results furthermore covers conversion of geographical coordinates to distance, determination of latency, conversion of measured value to dose rate and comparison with theoretical assumptions were solved. Formation of an area radiation map is also concerned. Direction-sensitive detection of gamma radiation is also studied in this thesis.
|
guest ::
