|
|
Construction project for implementation of Retirement home Žacléř
Bonaventura, Pavel ; Průcha, Aleš (referee) ; Kantová, Radka (advisor)
The aim of this diploma thesis is to prepare the construction of a Home for the Elderly in Žacléř. The work deals with technical regulations for the dismantling of asbestos roofing, demolition work and monolithic structures. For these regulations, a time plan for the implementation of monolithic structures, a control and test plan for monolithic structures, an itemized budget and a time and financial plan - object-oriented will be prepared. Furthermore, this work contains the coordination situation of the construction with broader transport relations, the design of the assembly machine, the report for the construction site equipment with drawings of the construction site equipment for individual technological regulations and last but not least the health and safety plan and assessment of construction noise. As part of the diploma thesis, several appendices were prepared for this stage, such as crane assessment, details of monolithic stair arms, noise wall scheme, budget for construction site equipment, environmental plan, ceiling and wall formwork scheme and staff balance for selected stages.
|
|
|
Flat Building
Podepřel, Petr ; Ducháč, Petr (referee) ; Požár, Michal (advisor)
The thesis deals with the design and calculation of selected parts of an apartment building in Brno. The apartment building is 6 floors (one underground floor and 5 above-ground floors), the underground floor is the entire reinforced concrete. The work focuses mainly on the static design and assessment of individual elements of reinforced concrete structures. The assessed load-bearing elements are the roof slab, ceiling slab 1.PP, prefabricated staircase, elevator shaft and so-called white bath (foundation slab, walls). All calculations are performed using SCIA Engineer. Individual ceiling slabs and staircases are solved by 2D models and the construction of the white bathtub is made in a 3D model. The design proceeded according to valid European standards ČSN EN 1992-1-1 and ČSN 73 1201. The result of this work is static design of reinforcement of all solved parts and drawing documentation.
|
|
|
Apartment building
Chroustová, Natálie ; Bartošová, Andrea (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is documentation for the construction of the new apartment building in Janová. It is a four-storey basement building with an elevator. There are eighteen residential units in the apartment building. Some of them have access to a balcony or loggia. Each apartment has its own parking space directly in the building or in front of the building. The most part of basement is made up of a collective garage with seven parking spaces and one parking space for people with impaired ability to orientate and move. There is also a parking space for bicycles, a room with cellars, a technical room, an air conditioning engine room, a room for electricity meters, a carriage house and a cleaning room. The upper floors are made up of individual housing units with layouts of 1+kk, 2+kk, 3+kk and 4+kk. The new apartment building is based on concrete strip footings and foundation pads. The vertical load-bearing structures of the underground part of the building are made of cast-in-place reinforced concrete wall. In the above-ground part of the building is designed structural longitudinal and transversal masonry system made of bricks by Porotherm. The floor structures in the whole building consists of cast-in-place reinforced concrete slabs. The roof of the building is a warm flat green roof. The ventilated facade of the building is made of bond S-Z type facade panels.
|
|
|
Apartment building with a shop in Hustopeče
Oscitá, Tatiana ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
A new residential building with a commercial space was designed on plot number 4542/245 in the cadastral area of the city of Hustopeče. The building has 3 above-ground floors and a basement. The first floor consists of a 3-bedroom apartment (3+KK) and a toy store. The second and third floors are identical, each containing one 3-bedroom apartment (3+KK) and one 4-bedroom apartment (4+KK). The first basement floor houses storage rooms, a utility room, and 3 separate garages. In total, the building consists of 5 residential units and 1 commercial space. The residential area and the commercial space have separate entrances. The entire building, including Apartment 101, is designed to be accessible for people with disabilities. The external load-bearing structures of the above-ground floors are made of ceramic blocks, while the basement floor uses insulated concrete formwork. The foundation structures consist of plain concrete footing strips. The ceiling structures are monolithic reinforced concrete and ceramic concrete panels. The staircase is prefabricated with reinforced concrete. The roof above the residential units is a heavy, sloping green roof, while the roof above the staircase area is flat.
|
|
|
Reinforced concrete slab in parkhouse
Gregorová, Michaela ; Švaříčková, Ivana (referee) ; Požár, Michal (advisor)
The diploma thesis is focoused on design floor slab od parking garage. The floor slab is a typical floor above 1.NP. The elemenst of parking garage are made of část-in-placec reinforced concrete except for stair fligts, which are made of prefabricated reinforced concrete. The output of the diploma thesis is a structural design report, drawings of the shape and reinforcement. Calculations were performer in Scia Engineer 21.1. The drawing documentation was made in the AutoCAD 2014 with the RECOC add-on.
|
|
|
Reinforced concrete slab supported on columns
Hadamíková, Karolína ; Strnad, Jiří (referee) ; Požár, Michal (advisor)
The bachelor thesis is focused on design and assessment point-supported slab on the lowest level of fourth-level storage to ultimate and serviceability limit state. Design of slab was created in software SCIA Engineer and followed by checking if it is right by manual calculation. This thesis contains a static calculation and technical drawings of typical column, foundation pad. At the end of structural assessment was calculated prefabricated staircase. All structures were proceeded according to the valid standard ČSN EN 1992-1-1.
|
|
|
Apartment building
Chroustová, Natálie ; Bartošová, Andrea (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is documentation for the construction of the new apartment building in Janová. It is a four-storey basement building with an elevator. There are eighteen residential units in the apartment building. Some of them have access to a balcony or loggia. Each apartment has its own parking space directly in the building or in front of the building. The most part of basement is made up of a collective garage with seven parking spaces and one parking space for people with impaired ability to orientate and move. There is also a parking space for bicycles, a room with cellars, a technical room, an air conditioning engine room, a room for electricity meters, a carriage house and a cleaning room. The upper floors are made up of individual housing units with layouts of 1+kk, 2+kk, 3+kk and 4+kk. The new apartment building is based on concrete strip footings and foundation pads. The vertical load-bearing structures of the underground part of the building are made of cast-in-place reinforced concrete wall. In the above-ground part of the building is designed structural longitudinal and transversal masonry system made of bricks by Porotherm. The floor structures in the whole building consists of cast-in-place reinforced concrete slabs. The roof of the building is a warm flat green roof. The ventilated facade of the building is made of bond S-Z type facade panels.
|
|
|
Construction project for implementation of Retirement home Žacléř
Bonaventura, Pavel ; Průcha, Aleš (referee) ; Kantová, Radka (advisor)
The aim of this diploma thesis is to prepare the construction of a Home for the Elderly in Žacléř. The work deals with technical regulations for the dismantling of asbestos roofing, demolition work and monolithic structures. For these regulations, a time plan for the implementation of monolithic structures, a control and test plan for monolithic structures, an itemized budget and a time and financial plan - object-oriented will be prepared. Furthermore, this work contains the coordination situation of the construction with broader transport relations, the design of the assembly machine, the report for the construction site equipment with drawings of the construction site equipment for individual technological regulations and last but not least the health and safety plan and assessment of construction noise. As part of the diploma thesis, several appendices were prepared for this stage, such as crane assessment, details of monolithic stair arms, noise wall scheme, budget for construction site equipment, environmental plan, ceiling and wall formwork scheme and staff balance for selected stages.
|
|
|
Apartment Building
Zemánek, Petr ; Pilík, Václav (referee) ; Struhala, Karel (advisor)
The subject of this bachelor's thesis is a design of an new apartment building in Bystřice nad Pernštejnem. It is a three-storey building situated on a slightly sloping terrain. The building is detached. The entrance is from the north side, where is an existing acess road. There are 4 same house units in the apartment building. The building is made of ceramic brick blocks. The ceilings are made of prestressed reinforced concrete panels and reinforced concrete prefabricated elements. The roof is flat, single-skinned, green and with a constant inclination. This work contains documentation of the real execution.
|
|
|
Apartment house
Černý, Martin ; Hrochová, Žaneta (referee) ; Sedláková, Markéta (advisor)
The subject of the bachelor's thesis is the design of an apartment building in Humpolec. It is an apartment building, which has four floors above ground and one underground floor. On the first floor part of the house is designed for administration. The building is built on a slightly sloping terrain and is free-standing. Main entrance with entrance to the collective garage is situated to the southwest, where the existing access road is. Nine different housing units are designed. The construction system is made of ground ceramic blocks. The ceilings are made of prestressed panels and the roof is single skin. The work contains project documentation of the actual implementation.
|
guest ::
