|
|
History of Civil Aviation 1970-2000
Sehnálková, Radka ; Bencalík, Karol (referee) ; Chlebek, Jiří (advisor)
The main subject of this bachelor’s thesis is concise and clear history of civil aviation between year 1970 and 2000. This era is typical with outset of large transport aircraft, which are intended for long distances and big number of passengers, but attention is also paid to aircraft, which are not for transport of so many passengers. Thesis is focus on concise description of individual aircraft, divided by its types of propulsions and producer.
|
|
|
Prototype part and made by method rapid prototyping
Kočárek, Karel ; Dvořáček, Jan (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis is dealing with prototype stage during development of reduction part for gas flow control, which is positioned in gas boiler downstream of the valve. Thesis is focused on additive manufacturing. Basic technologies, their attributes and procedures which are necessary to be followed are described here. Practical part is composed of 3D model creation in CAD software, export of model to STL format and its inspection for compactness. After that 3D model is sent to printer and functional components are made, that can be used for application verification and for detection of possible design deficiencies before the mold assembly is made.
|
|
| |
|
|
An overview of advanced rapid prototyping techniques and their use in foundry industry
Drda, Jan ; Stachovec, Ivo (referee) ; Macků, Martin (advisor)
This bachelor thesis deals with overview of Rapid Prototyping techniques and their application at foundry industry. It’s split into three parts. In the first part is shown whole process that leads to prototype creation with rapid prototyping techniques. Second part shows overview of techniques which are used around the world. It’s split into three smaller parts that shows basic allocation between techniques and there are main specifications, advantages, disadvantages and application. The last part is summary of current situation in Czech Republic and there is practical example of application Rapid Prototyping techniques at manufacturing.
|
|
| |
|
|
Sport downhill cart for the disabled
Šantavý, Ivo ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
This bachelor´s thesis deals with the development of a "Sport downhill cart for the disabled" prototype. This project was jointly inspired by Human Power Vehicles and by components from various industry sectors. After a description of the above mentioned vehicles, the work describes the successive development of the cart, including construction solution, and a component and frame modeling in the CAD system Autodesk Inventor. The total calculation of the entire "Sport downhill cart for the disabled" is presented in the conclusion.
|
|
|
Engines for Le Mans Series
Herman, Pavel ; Blaťák, Ondřej (referee) ; Svída, David (advisor)
This bachelor´s thesis deals with the overview of development the drive units, which are used by racing cars of Le Mans endurance series, mainly the race 24 hours of Le Mans. In the first part is outlined the general characteristic the series and the race 24 hours of Le Mans itself. There are briefly described the instructions and the most important technological limitations, observed by designers. The second part contains an owerview of racing cars engines, which are interesting from the historical point of view either by their construction or by achieved success. The last part is devoted to the constructional comparison of drive units of present participants the Le Mans series, their description and the important technical specifications.
|
|
| |
|
|
DMS pilot implementation in banking environment
Žáček, Jan ; Šedivá, Zuzana (advisor) ; Pour, Jan (referee)
The diploma thesis focuses on the analysis of a document management system (DMS) pilot implementation in the environment of a Czech bank. The thesis is divided into three parts; the first part is theoretical and remaining two parts are practical (analytical). The theoretical part is devoted to summarization of basic theoretical knowledge in the field of DMS and in a pilot deployment of information systems. The second part describes the EMC xCP 2.1 platform and evaluates its advantages and disadvantages compared to competing products. The third part describes the technological implementation and deployment of a new DMS pilot solution in a bank. Further it analyzes and describes the follow-up activities and related projects that increase the DMS usability in a real business applications. The diploma thesis concurrently focuses on the business requirements analysis including constrains of a new solution deployment, as well as the DMS technological aspects description and the solution design. The author of this thesis has been working as an analyst in the IT company and has been in a long-term cooperation with the DMS team in the bank. The motivation for choosing this topic is to make a summary and clarification of knowledge gained on projects in the the bank and to take an advantage of it in the future cooperation.
|
|
|
Creating a functional prototype of mobile application
Vodrážka, Šimon ; Šubrta, Václav (advisor) ; Truhlář, Filip (referee)
The aim of this thesis is to create a functional prototype of mobile application which will serve to the purpose of managing warranty documents. Way how to achieve the objective is to carry out a user survey and subsequent user testing from which the prototype of mobile applications emerges. In the theoretical part I analysed the most common methods of user research and user testing and evaluated them for the purposes of my thesis. In the practical part I used the selected methods to perform user research and user testing and subsequently created a prototype.
|
guest ::
