|
|
Apartment building
Burian, Jaroslav ; Hradil, Dušan (referee) ; Kolář, Radim (advisor)
The subject of the bachelor thesis is the design and processing of project documentation for the construction of a new residential building in Nosislav. The residential building is designed on a plot located on the northern edge of the village, the site is leveled. The building of the apartment house is designed as a detached house with one underground floor and two above-ground floors. There are a total of five residential units on the upper floors, one of which is designed as 1+KK, the other residential units are designed as 3+KK. In the basement of the building there is the technical background, storage space for each apartment and communal areas such as a shared warehouse, workshop and community room. The load-bearing system is a combined wall system, the vertical load-bearing structures are made up of lost formwork on the underground floor and lightweight concrete with lime-sand blocks on the above-ground floors. The horizontal load-bearing structure is designed as a monolithic reinforced concrete slab. The individual floors are connected by a two-arm monolithic reinforced concrete staircase. The roof is constructed as a truss roof with ceramic roofing. The building is insulated with a contact thermal insulation system.
|
|
|
Single-family house in Hodonín
Zemánek, Jan ; Jechová, Marie (referee) ; Ostrý, Milan (advisor)
The goal of my bachelor’s thesis is to design a nZEB house for family of four. It is located on the edge of town Hodonín. The house has two floors with a one floor garage attached to the side. The first floor contains utility room, some storage area, kitchen to the north that is connected with living room and dining room facing south. The second floor than has two bedrooms facing south-east, study and master bedroom facing north-east and bathroom facing northwest. The roof of the house is flat with surface form waterproof membrane. Roof of garage is extensive green roof. The foundations of the building are reinforced concrete strips. Load bearing walls are masonry designed from sand-lime blocks with external mineral wool insulation. Horizontal load bearing structures will be made from reinforced cast on site concrete. Partition walls are planned to be from plasterboard. The main source of heat for the house will be air to water heat pump with performance of 8,02 kW and inbuilt electric insert to get temperature needed for floor heating. For hot water there will be separate hot water cylinder with volume 208 l and inbuilt electric insert. The ventilation system will be MVHR with air exchange of 310 m3/h and bypass system. The internal sewage system will be connected to the city sewer, while rainwater will be collected, used for watering garden, or infiltrated into the soil. For cooling external shutters will be enough.
|
|
|
Detached house in a suburban area
Cech, Aleš ; Kolář, Radim (referee) ; Jelínek, Petr (advisor)
This bachelor's thesis focuses on the design of nearly zero-energy house for a minimum of a five-member family. It includes parts A and B. Part A contains structural and architectural design, fire safety and assessment of building physics (acoustics, sunlight, and thermal assessment). Part B contains detailed design of air conditioning system, concept design of selected building services (heating, cooling, electrical installation, rainwater management) and the energy performance certificate. The house is located in the suburb of Znojmo, has two storeys, L-shaped floor plan, with a flat green roof and a car port next to the entrance from the northern side. The load-bearing walls are designed of large format sand-lime blocks with thermal insulation made of expanded polystyrene. The load-bearing floor and roof structures are designed as cast-in-place reinforced concrete slabs. The foundation slab is laying on foam glass granules. The source of space heating and DHW heating is a heat pump with a borehole collector. Space heating and cooling is provided by underfloor heating and fancoil units, simultaneous cooling regenerates the temperature of the soil in the borehole collector. Ventilation is provided by a mechanical, equal pressure system with heat recovery. The supply air is filtered and distributed by disc valves. There is a photovoltaic power plant on the roof with battery storage in the utility room. Rainwater is collected from the roof of the house, paved areas and parking shed roof stored in accumulation tank and used to water the garden. Excess rainwater is infiltrated in underground seepage.
|
|
|
Energy efficient family house
Netopilová, Denisa ; Brzoň, Roman (referee) ; Vlach, František (advisor)
The aim of this Bachelor’s thesis is to design a nearly-zero-energy building. The level of documentation is for the building permit. First part focuses on architectural and structural design, as well as on Building Physics and Fire Safety, the second part on building service design. The designed detached house stands on a flat site in Lipník nad Bečvou. It is a two-storey house with an attached single storey garage. Both the house and the garage have flat green roofs. The main entrance is oriented to the north. On the first floor, there is a hallway, a utility room, a bathroom, an office, and a living room connected with a kitchen and a pantry. The private part of the house is on the second floor, which consists of a master bedroom with a walk-in closet, two other bedrooms, a bathroom, a toilet and a laundry room. The foundations are made of foam glass. The vertical structures are from sand lime blocks. The horizontal load-bearing structures are made of in-situ reinforced concrete. The heating is provided by a heat pump air-water using an underfloor heating system. The heat pump in combination with two solar thermal panels supply heating of the domestic water. Mechanical ventilation with heat recovery is installed and used in the house. The documentation for MVHR is on the level of detailed design. Wastewater treatment, electric installations and rainwater system are also designed. The rainwater is collected mainly from the roofs and stored in an underground water tank. This water is then used for flushing the toilet and in summer months for watering the garden. This part about building service design also includes the Building’s Energy Performance Certificate.
|
|
|
Apartment build in Slušovice
Vyvlečková, Iveta ; Pěnčík, Jan (referee) ; Dohnal, Jakub (advisor)
The aim of the bachelor thesis is to elaborate the project documentation of a new residential building in Slušovice. The building is designed as a detached, non-basement building. It has an irregular shape and is covered with a flat single-skin roof. On the first floor there is a background of the house, a technical room, warehouses, a meeting room and a cleaning room. Parking spaces are provided on the property. Floors 2.NP, 3.NP, 4.NP are used for housing and in total there are 12 residential units each of size 3+1. The vertical structural system is made of SILKA sand-lime blocks. Horizontal load-bearing structures are made of reinforced concrete monolithic slab. The project documentation also includes a basic assessment of the building in terms of building physics.
|
|
|
Detached house in Horní Stakory
Hornychová, Anna ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The aim of this bachelor thesis is to design a nearly zero-energy detached house. It is located in Horní Stakory near Mladá Boleslav. The project is divided into two parts. The first part is the documentation for the construction of the building. The second part focuses on the internal environment of the house especially the heating system. It is a two-storey L-shaped building with an attached garage with a flat roof. The main part of the building has a gable roof. The first floor of the building is designed as a living area – living room, study or guest room, bathroom, utility room. The second floor is designed as private – bedrooms, bathroom and WC. The building is based on concrete foundation strips. The vertical structures are masonry made of sand-lime bricks. The building is insulated with the ETICS. Horizontal load-bearing structures are made of reinforced concrete. Heat losses through ventilation are eliminated using a mechanical ventilation unit with heat recovery. The heat pump will heat the supplied air and provide water heating for the underfloor heating. The main building will be heated by underfloor heating supplemented by electric towel heaters and occasionally by an electric heater in a non-heated garage. Solar panels will heat the hot domestic water. Electrical energy will be supplied from photovoltaic panels located above the garage and from the grid. Rainwater will be accumulated in a storage tank and used further for watering. The excess rainwater will be soaked up.
|
|
|
Detached house in Boleradicích
Pospíšilová, Kateřina ; Jelínek, Petr (referee) ; Dohnal, Jakub (advisor)
The aim of this bachelor’s thesis is to design a nearly zero energy detached house for a family of four. The first part of the thesis is architectural and structural design, including fire safety solution and building physics, which is focusing on acoustic assessment, thermal assessment, and assessment of daylight. The second part is design of building services and design of heating system for a documentation for building permit. The building is located on gently sloping plot in a Boleradice in South Moravia. It has two storeys and gable roof. There is a separate one-storey garage with flat green roof on the plot. The building is based on a reinforced cocreate foundation slab on gravel of foam glass. The external walls are made from sand-lime blocks with ETICS of expanded polystyrene with graphite. The floor structure is a cast-in-place reinforced concrete slab. Gable roof is design like a warm roof, with load bearing structure from timber. The ground floor includes a walk-in wardrobe, a study, a utility room, a bathroom, a pantry, a living room open to a kitchen with access to the deck. The private zone, located on the first floor, consists of a master bedroom, children’s bedrooms, a bathroom, a separate toilet, and walk-in wardrobes. In the project, the design includes mechanic ventilation with heat recovery, rainwater management system, sanitary installation, electric installations, and a photovoltaic system as part of design conception of building services. Heating and domestic hot water treatment are provided by an air-water heat pump. Distribution of heat is provided by floor heating. The project also includes the Energy Performance Certificate.
|
|
|
Detached house Rybníček
Kvasničková, Barbora ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The aim of the bachelor’s thesis is to design a new detached house at the level of project documentation for the building permit. The first part of the thesis contains the architectural and structural design, fire safety design and building physics. The second part of the thesis contains the design of building services. The house is designed on a flat plot in the small village Újezd–Rybníček. It has rectangular shape, two storeys and a flat green roof with photovoltaic power plant. Detached garage with rectangular shape has a flat roof. On the ground floor, there are a kitchen with living room with the access to the deck, a workroom with suite bathroom, a utility room, a bathroom, and a toilet. On the first floor, there are rooms for children, bedroom with dressing room, workroom, a bathroom, and a toilet. The house is based on a cast-in-place reinforced concrete foundation slab with foam glass. The load–bearing walls is made of sand-lime blocks. The horizontal structures are made of cast-in-place reinforced concrete. I designed ventilated façade with fibre cement cladding and green walls. Heating is provided by a geothermal heat pump with a vertical ground borehole. I designed floor heating. Ventilation is provided by a mechanical ventilation unit with heat recovery. For rainwater management, I designed an accumulation plastic tank for storage and use rainwater for irrigation green façade and watering garden. From the tank is designed to overflow to infiltration tunnels. The thesis also includes an energy performance certificate for the building.
|
|
|
Recreational facilities Náklo
Vymětal, Jaromír ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The subject of the diploma thesis is a new building of a recreational pension with restaurant and wellness facilities in Náklo. It is a multi-storey building with three above-ground and one underground floors, located near Lake Kobylnik. The accommodation capacity of the boarding house is 26 beds. The proposal respects both the municipal plan and the existing surrounding area. It has a rugged floor plan with a central staircase. The vertical supporting structures are made of sand-lime blocks. Ceiling structures are made of prestressed reinforced concrete panels with cavities and reinforced concrete monolithic panels. The object of the holiday house has two types of roofing. Classical sloping saddle roof and flat roof above the central part. A water surface and a recreational area are designed on the parcels concerned. The proposed building is situated in a perspective area for tourism, near the Litovelské Pomoraví Protected Landscape Area.
|
|
|
Polygrafic production PROGRAF
Ptáčková, Eva ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The aim of this Diploma thesis is the elaboration of the project documentation of a construction part for realization of the new building of the production hall and administrative building in a city of Slavkov u Brna. According to the local zoning plan, both buildings are designed on a plot in the development part of the city. The selected plot is conveniently located due to good accessibility to the D1 motorway. The office building will consist of two above-ground floors. On the first floor there will be the management of the company and the head of the press, the economic and commercial department, hygienic facilities. On the second floor there wil be a graphic studio, a day room and a spacious terrace. The construction system of an office building will be a wall longitudinal. The ground plan of the object is rectangular. the roof is designed as a mono-pitched roof. The factory is a single-storey building. Inside the factory hall there will be a polygraphical technological equipment. The location of the machines is only indicative as well as their choice. The hall will have its own equipment equipped with air conditioning and heating. It is designed as a precast concrete frame. The system is designed longitudinal. The object is a rectangular ground plan with a saddle roof.
|
guest ::
