|
|
The Press Line Optimization Design
Tokoš, Juraj ; Bartošek, Vladimír (referee) ; Videcká, Zdeňka (advisor)
This bachelor thesis focuses on analyzing the current state of the press line and proposing its optimization using simulation. The theoretical part is dedicated to production processes and lean manufacturing methods. In the analytical part, the company in question is introduced. This is followed by an analysis of the current state of the production line. The design section describes variants of simulation models of both the current and optimized process forms and evaluates the benefits of the proposed solution.
|
|
|
Process Optimization in the Company
Hraško, Filip ; Gruševoj, Nikolaj (referee) ; Videcká, Zdeňka (advisor)
The bachelor thesis deals with process improvement at the final assembly workplace of ABB, an electrical engineering company engaged in the production of instrument transformers. The first part of the thesis presents the methods and theoretical foundations that are used in the later parts of the thesis. In the analytical part, the company ABB is first introduced and then the production process is analysed, followed by a detailed analysis of the processes at the final assembly workplace. The design part focuses on the elimination of waste in the final assembly workplace using lean manufacturing and Lean Six Sigma methods. The aim of the proposals is to reduce waste and thus achieve savings.
|
|
|
DESIGN AND APLICATION OF COLLABORATION ROBOTS ACCORDING OF I4.0
Salaj, Jakub ; Szabari, Mikuláš (referee) ; Knoflíček, Radek (advisor)
Presented bachelor’s thesis deals with collaborative robots and their application in manufacturing with a focus on the implementation of Industry 4.0 principles. In the theoretical part of the thesis, a system analysis of the robotization of production processes by collaborative robots was carried out, as well as a system analysis of cobots as a technological system and the requirements that are set by the relevant standards for their safe operation. In the literature review, a range of design solutions offered by three major manufacturers of cobots and end effectors were demonstrated. The main research objective was to describe successful implementations in practical manufacturing applications. A sub-objective of this thesis was to evaluate the cobot workplace in the context of Industry 4.0. The evaluated workplace was a station for measuring the electric resistance of the fuel-filter during its production, whose operation was described and evaluated by means of a SWOT analysis. In the conclusion of the thesis, based on the obtained findings, an overall evaluation of the monitored issue and recommendations for its further development were formulated.
|
|
|
Manufacturing process in the automotive industry
Černohous, Šimon ; Jurová, Marie (referee) ; Juřica, Pavel (advisor)
This bachelor thesis focuses on modification of assembly line at the company Panasonic Automotive Systems Czech s. r. o. for sole purpose of increasing productivity while lowering costs. Theoretical part firstly defines principles and methods used in thesis. Analytical part introduces a company, but mainly describes the data, which will be used later. Proposition part is used to outline of individual change, that have been made.
|
|
| |
|
|
Measurement of Production Overall Equipment Effectiveness
Žanda, Miroslav ; Novák, Josef (referee) ; Píška, Miroslav (advisor)
The diploma work deals with measurement of Production Overall Equipment Effectiveness in manufacturing company Alfa. Firstly, is processed the theoretical part concerning general production, TPM, lean manufacturing and OEE. After than is described the company, monitored device and technology used by the device. In the final section is evaluated the OEE for January, February and March; analyze downtimes, mistakes and losses and their solutions are proposed. The last chapter is devoted to the economic evaluation of the proposal.
|
|
|
Proposal for Lean Manufacturing Using Kaizen Products to Ensure Quality
Alánová, Hana ; Brablík, Jakub (referee) ; Jurová, Marie (advisor)
This diploma thesis is based upon a study of processes in a subdivision of fischer systems, a company in the automotive industry. These processes are studied with reference to lean manufacturing and Kaizen products. The first part of this thesis is a general introduction to the company. It is followed by a description of the subdivision in question, and a discussion of various theoretical approaches. An analysis of the current state of manufacturing and processes is also made. Finally, a proposal is made towards solving imperfections uncovered in the analysis stage, and getting the company closer to lean manufacturing.
|
|
|
Optimization of Production Processes Using Lean Methodology
Jablonka, Ján ; MBA, Marek Chromý, (referee) ; Juřica, Pavel (advisor)
The aim of this thesis is the implementation of lean manufacturing principles according to the lean methodology in selected company to minimize waste and effectiveness of production. The theoretical part is focused on defining the terms lean manufacturing, waste and lean methods that serve as the foundation for the practical part. The practical part is divided into several parts. First step is to do a SWOT analysis of production in a particular company. Using the lean tools, we find the root cause of the problem and propose solutions to effectiveness the manufacturing process. Part of the proposals will also benefit the proposed solutions. It is necessary to note that according to the lean methodology, not every proposal must automatically have a financial impact.
|
|
|
Optimization of the Armrest Manufacturing Process
Baláž, Branislav ; Juřica, Pavel (referee) ; Videcká, Zdeňka (advisor)
This bachelor thesis deals with the optimization of production processes taking place in the manufacturing company IAC Group Slovakia. The work includes a presentation of the company and an analysis of the current state of production processes taking place in the company. The theoretical part of the work describes the methods of lean manufacturing, basic concepts associated with the process management of the organization. In the analytical part, the manufacturing company is first introduced and a global analysis of processes is performed. Then a specific production process is analyzed, which will be optimized. The proposed part shows the proposed part of the process and there are evaluated the benefits of the proposed solution.
|
|
|
Process Optimization in the Company
Pokorný, Robin ; Hrdina, Pavel (referee) ; Videcká, Zdeňka (advisor)
The bachelor thesis deals with the analysis of a production process and its optimization with the aim of streamlining production. The improvement is achieved through applying lean manufacturing tools and advanced analytical tools of simulation modelling. The theoretical section of the thesis introduces used principles, methods, and analyses. The analytical part evaluates the current state of the production process and serves as a basis for the design part, whereas the design part analyses the material and information flows using the Value-Stream Mapping methodology. The simulation model was created to aid the balancing of operations and the re-engineering of the production line. The output of this study proposes enhancements to the problem areas of the existing production process.
|
guest ::
