|
|
Peroxotitanate gels suitable for piezoelectric print
Fuksa, Andrej ; Pekárková, Jana (referee) ; Veselý, Michal (advisor)
This thesis provide information about deposition of thin layers from peroxotitanate precursor. Precursor containing peroxotitanic acid and mixture of solvents (isopropanol and ethyleneglykol), was printed with the ink-jet material printer. Glass slides were used as a substrate. Prepared layers of gel did not show photocatalytic activity, therefore calcination at 450 °C, was used to a gel conversion. Structure of the layers was characterized using optical and SEM microscopy. Photoactivity of the layers was studied by a hydroxy-lation of cumarine.
|
|
|
Deposition and characterization of SA layers from vinyltriethoxysilane
Veverka, Miroslav ; Veselý, Michal (referee) ; Čech, Vladimír (advisor)
Development of composite material is very much progressive sector and leads to evolution of material with new property. This type of material has one, but important deficiency. It is small adhesion armature to matrix. My study is sight on improvement adhesion the surface by deposition self assembled (SA) monolayer from organosilanes. Property of this layer, like thickness, surface tension, homogenity and wettability, was evaluated by the contact angle measurement and spektroscopical elipsometri.
|
|
|
Evaluation of Inkjet printout degradation
Blažková, Michaela ; Čeppan, Michal (referee) ; Veselý, Michal (advisor)
This diploma thesis deals with the study of inkjet print degradation on handmade paper modified by polymer layer containing light stabilizers and inorganic filler. The polymer layer coated on the medium consisted of polyvinylalcohol, titanium dioxide and light stabilizer. The influence of light promoted degradation and light stabilizers was observed. The experiments were carried out on Q-SUN Xenon Test Chamber device, Model Xe-1-B/S. Colorimetric values of test chart were measured and the influence of different light stabilizers on the color difference between original and faded sample was evaluated.
|
|
|
Water World - Zone of Recreation Vyškov
Vesely, Michal ; Kokeš, Václav (referee) ; Boháč, Ivo (advisor)
It is a self-standing restaurant building. The basement contained storage needed for restaurant operations. The first floor is the kitchen which has placed kitchen for seating on both sides of the building. Also found here are also toilets and lift to upper floor. The first floor is the actual operation of the restaurant terrace.
|
|
|
Ozone gas-fading of photographs
Védlová, Petra ; Kozáková, Zdenka (referee) ; Veselý, Michal (advisor)
This bachelor thesis deals with principels of inkjet printing, ink composition and print media. The paper also focuses on stability of inkjet prints, degradation of inks by ambient impacts, mechanisms of such degradations and protection against degradation. The experimental section examines the impact of ozone on gas-fading of injekt prints, which is one of the most important factors by degradation of dyes for both clasic prints and prints with protective varnish. In conclusion two methods for assessing dye degradation – colorimetric (by calculating the volume of the color gamut) and densitometric (by calculating optical densities) – are investigated and compared.
|
|
|
Optical properties of protective emulsions
Valasová, Denisa ; Veselý, Michal (referee) ; Zmeškal, Oldřich (advisor)
This bachelor´s thesis is aimed to the study of optical properties of protective commercially available emulsions. Chosen emulsions should be responsible for sun protection. They also may be used in cosmetic industry. In the beginning of the thesis, there are defined theoretical features of emulsions and their interaction with UV radiation. Methods which are used to describe optical properties could be found in this section too. The optical properties were measured in thin layer films, in order to simulate emulsions applied on the human skin. UV-VIS spectrophotometry was mainly used to study the optical properties. The obtained results could serve, purely hypothetically, like sun protective tests of chosen emulsions.
|
|
|
Monitoring of photocatalytic activity using redox dyes
Uhrová, Ivana ; Drbohlavová, Jana (referee) ; Veselý, Michal (advisor)
The bachelor thesis deals with assessment of photocatalytic activity of titanium dioxide. The easiest and simultaneously the quickest way is bleaching of indicator ink based on redox dye. The theoretical part contains characteristics of several similar dyes and a description of ink-structure effect on total bleaching speed. The experimental part elaborately describes bleaching of indicator ink based on redox dye 2,6 dichloroindophenol, depending on the number of ink layers on photocatalytic active surface as well as on total amount of glycerol.
|
|
|
Utilization of Deep-UV-LED for photocatalytic activity study
Knobová, Klára ; Zmeškal, Oldřich (referee) ; Veselý, Michal (advisor)
This bachelor thesis deals with the influence of several light emitting diode sources of UV light on photocatalytic activity of titanium dioxide. The theoretical part involves their properties and production and covers existing knowledge. DEEP-UV light emitting diodes with different wavelength of emitted light and their influence on the rate of photocatalytic degradation of stearic acid are studied in the experimental part.
|
|
|
Monitoring of photocatalytic activity
Jurášek, Martin ; Drbohlavová, Jana (referee) ; Veselý, Michal (advisor)
Bachelors thesis deals with kinetics of redox dye 2,6-dichloroindophenol degradation. Thanks to photo-reduced form is colourless, it’s suitable to use it for photocatalytic activity rapid assessment of the thin titanium dioxide layers. The thin layers of TiO2 were prepared using nano-crystalline titanium dioxide suspension with amorphous silica. These layers, including layers of redox dye, were deposited by material printing process. The rate of redox dye photo-reduction was monitored in dependence of number of thin titanium dioxide layers at different UV irradiance. Redox dye concentration was studied using UV-VIS spectroscopy.
|
|
|
Protection of prints by varnishing
Lokotschová, Radka ; Dzik, Petr (referee) ; Veselý, Michal (advisor)
This bachelor thesis deals with the issue of basic inkjet printing principles. It describes the continual stream and the drop on demand technique. It also deals with the issue of paper media, which are used during the inkjet printing – supporting bases and receiving layers. The thesis includes a description of print degradation, which is caused by UV-VIS radiation, pollutants, humidity or by elevated temperature. It also deals with the basic characteristics of varnishing and lamination.
|
guest ::
