|
|
Problems of Drug Residues Determination in Waste Waters
Lisá, Hana ; Márová, Ivana (referee) ; Hajšlová, Jana (referee) ; Kráčmar, Stanislav (referee) ; Vávrová, Milada (advisor)
The PhD thesis deals with determination of sulfonamides and tetracyclines in waste waters. Sulphonamides and tetracyclines are widely used in human and veterinary medicine. They are biologically active compounds and block biological processes in waste water treatment plants. These substances can influence microorganisms in the environment. Sulphonamides and tetracyclines induce resistance in low concentrations. These substances penetrate into the environment from industrial production, use in households, hospitals, veterinary clinics and fish farms. Tetracyclines and sulphonamides were determined in waste water from waste water treatment plants in Brno. Optimalization of extraction of these compounds was performed by solid phase extraction. Sulphonamides and tetracyclines were determined by liquid chromatography coupled with diode array detector or coupled with mass spectrometry. Optimalized method was used for determination tetracyclines and sulphonamides in waste water from waste water treatment plants in Brno in years 2007 – 2010.
|
|
|
Effect of sample treatment on biofuel characteristics
Zlevorová, Tereza ; Lachman, Jakub (referee) ; Lisá, Hana (advisor)
The subject of this bachelor thesis is experimental solution of the problem focused on the effect of sample treatment on bioful characteristics. The theoretical introduction includes biofuel classification, explanation of each biofuels‘ trait and description of methods used to their determination. It continues with sample preparation with broader focus on milling. The following experimental part examines basic traits of four materials before and after milling on high-speed rotor mill using multiple sieves of varying fineness. The traits were determined using normalised methods. For determination of moisture had been selected gravimetric method. In this thesis, there is described every procedure and following calculations. The results are stated in tables and processed in graphs.
|
|
|
Waste gas combustion
Krček, Robin ; Lisá, Hana (referee) ; Baláš, Marek (advisor)
This bachelor thesis deals with the issue of using waste gases as fuel. The first part is focused on the production processes, properties and composition of selected waste gases. The following part is an overview of the methods used in the treatment and removal of pollutants from the gas. Finally, technologies that generate electrical, thermal or mechanical energy by burning waste gases are summarized.
|
|
| |
|
|
Design for waste gas cleaning
Kubík, Michal ; Lisá, Hana (referee) ; Baláš, Marek (advisor)
This diploma thesis deals with impurities in waste gases and syngas. Those gases usually have low heating value and contain impurities which are the main issue of those gas fuels. Waste gases and syngas can replace natural gas after right gas treatment. First part is theoretical. It starts with description of biomass and gasification technology. Then the waste gases are described – their origin and usual composition. Next part is dedicated to impurities and is followed by impurities treatment technologies. For removing of almost every type of impurity wet scrubber can be used which is described in detail in following part. There are other types of gas cleaning technologies, so they are described too but not in such detail as wet scrubber. In second part the wet scrubber is designed, and its function is tested by cleaning syngas from fluidized-bed gasifier called Biofluid. During gas cleaning in wet scrubber the influence of water temperature on efficiency of tar removal is examined.
|
|
|
Methods of Determination of Moisture Content
Bezdíček, Jiří ; Lachman, Jakub (referee) ; Lisá, Hana (advisor)
With the growing interest in the energy use of biomass in the form of solid biofuels, the requirements for determining the moisture content of these fuels are also growing. Moisture is an important factor not only in the production of biofuels, where the moisture values must be ideal, eg in the production of pellets, but also in storage and other processes. The aim of the work was to determine the suitability of methods for determining moisture for various types of solid biofuels. The main subject of interest was fuels with grain structure. A search of the basic distribution of fuels and introduced and new methods for determining moisture was performed. The research was focused on oven drying methods. The result is the determination of the unsuitability of the method of drying scales for fuels with grain structure, the suitability of all investigated methods for wood fuels, the accuracy of the reference method for most fuels and the susceptibility of the analytical method to the homogeneity of the test portion.
|
|
|
Emissions from biomass combustion
Ptáček, Pavel ; Lisá, Hana (referee) ; Baláš, Marek (advisor)
Bachelor thesis deals with production of gaseous emissions from biomass combustion. It describes how emissions arise and how they affect human health and environment. In experimental part of the thesis emissions were measured and compared for different types of fuel in two combustion devices. Emission classes of combustion devices were also determined.
|
|
|
Fuel properties: Determination of moisture solid fuels
Tretera, Michal ; Musilová, Petra (referee) ; Lisá, Hana (advisor)
This bachelor's thesis deals with the determination of moisture content in solid fuels. First part contains classification of solid fuels, proximate analysis of solid biofuels and a research of methods for determination of moisture content in solid biofuels. Description of impacts of the moisture content on fuel is included in the proximate analysis. Second part of the thesis is experimental. Thirteen solid biofuels and one solid recovered fuel were measured to obtain their moisture content. The methods used to determine the moisture content include four different drying methods and a xylene distillation method. For each method there are details of the procedure and a summary of the results.
|
|
|
Question of determination of analgetics in waters
Benešová, Markéta ; Lisá, Hana (referee) ; Vávrová, Milada (advisor)
The bachelor thesis is focused on the optimization of the method for the determination of analgetics in waters. The aim of this work is to work up the methodical procedure for determination of chosen pharmaceuticals i.e. salicylic acid and naproxen in model water samples. Analytes were isolated by solid phase extraction (SPE); they were identified by high performance liquid chromatography with UV-VIS detection of diode – array type (HPLC – DAD). The optimal method was selected from several verified procedures on the basis of practical experience.
|
|
|
Analysis of the heat utilisation from biogas stations for heating
Kareš, Martin ; Lisá, Hana (referee) ; Milčák, Pavel (advisor)
This bachelor thesis deals with the analysis of the use of heat from biogas stations. The first part describes the production of biogas, its combustion efficiency and the development of energy production thus obtained. In the second part it deals with individual solutions of the application of heat produced and in the last chapter it analyses the balance of the specific solution of heat transfer and its impact on the environment.
|
guest ::
