|
|
Speech switch for APD system
Hartmann, Lukáš ; Götthans, Tomáš (referee) ; Frýza, Tomáš (advisor)
This work describes design device that is used to connect voice speech lines in underground mines for APD system. Using the device, you can connect up to 60 speech lines up to sixteen independent communication group (circles). Each communication circle can be listen in by the operator, or he can initiate call from control board. Switching of individual lines is controlled using the utility on the computer that communicate with this device via serial port RS-485.
|
|
|
Stereo audio power amplifier with microcontroller
Filko, Patrik ; Götthans, Tomáš (referee) ; Brančík, Lubomír (advisor)
This bachelor thesis deals with designing stereo audio power amplifier, which specified functions such as control of volume, depths, treble and balance, are contoled by 16-bit microcontroler with digital potentiometers. Setting those functions is pictured on simple LCD display. Opted amplifier is easy to control ergo it finds use in wide spectre of audio devices such as ampliffing input signal from transmission audio media player or audio signal in television devices. Used design is able to be realized of easy to get components.
|
|
|
Communication network for a swarm of unmanned aerial vehicles
Rajm, Jan ; Götthans, Tomáš (referee) ; Janoušek, Jiří (advisor)
This bachelor thesis deals with creation of robust communication network used within swarm of unmanned aerial vehicles and its testing. In the first part, network requirements are presented and selected communication standards capable of transmitting telemetry data are described. The second part describes the software needed for telemetry data transmission and drone control. The third part presents designed communication network for a swarm of drones. Capabilities and differences between the designed network and networks based on other network technologies are presented. Also, the creation procedure of the designed network is described. The fourth part deals with a testing and an evaluation of results.
|
|
|
Quadrocopter realization
Pekarovič, Ján ; Galetka, Josef (referee) ; Götthans, Tomáš (advisor)
This thesis deals with the design of a helicopter with four rotors known as quadcopter. It describes the principles of operation and existing modifications. Part of the work is the selection of a suitable frame, remote control set, engines and propellers, battery, sensors for stabilization and detection of obstacles and microcontroller for their operation. The paper presents the concept of the specific copter design, design and simulation of printed circuit boards to their self-production, activation and testing. The final part of the thesis includes an economic assessment of the project and its comparison with competitors.
|
|
|
DAB Radio Receiver
Pišťák, Ondřej ; Götthans, Tomáš (referee) ; Dřínovský, Jiří (advisor)
This work is focused on design and construction of software defined radio that can play DAB+ standard. The received signal is processed by USB receiver RTL-SDR BLOF with 8 bits resolution A/D convertor RTL2832U and small single-board computer Raspberry Pi 3 (Model B). The work deals also with design and realization of control panel by which the radio is controlled. The LCD display is connected to Raspberry Pi and used for the screen information about currently playing radio program.
|
|
|
Low Energy Bluetooth Localization
Šlígl, Jan ; Nykodým, Jiří (referee) ; Götthans, Tomáš (advisor)
This diploma thesis is focused on design of localization device using Bluetooth 5.2 with low power consumption. Localization is performed using created devices forming a beacons and designed application for mobile phone. Also design of multiple types of antennas with different directional radiation pattern, gain and size. Design is mostly focusing on low power consumption and compact independent device.
|
|
| |
|
|
Vibrational energy harvesting demonstrator
Uhliar, Marek ; Götthans, Tomáš (referee) ; Mrnka, Michal (advisor)
The aim of the thesis is to solve the problem of energy collection from vibrations, transformation into electric energy, which can be suitably used by the end device. In the next section, the reader is acquainted with possible circuits that can be used to process the collected electrical energy. The last part of the thesis deals with the design of the auxiliary circuits for energy collection and with the design of the demonstration device, which will use the converted energy to measure the air temperature and humidity. The measured values will then be displayed on the LCD.
|
|
|
Design and realization of switching class audio power amplifier
Levocký, Kristián ; Götthans, Tomáš (referee) ; Brančík, Lubomír (advisor)
This bachelor thesis describes design of audio amplifier of class D with power 2x100W. Power part is designed with integrated circuit TAS5630B made by Texas Instruments and correction preampifier unit is regulated by four potentiometers , controled by integrated circuit TDA1524A. Switching supply is regulated by circuit TOP261EN. Whole device is installed in device box with graphic display and control components.
|
|
|
Laboratory power supply
Říha, Pavel ; Petržela, Jiří (referee) ; Götthans, Tomáš (advisor)
This bachelor's thesis deals with design, simulation and realization of a prototype of regulated laboratory power supply with adjustable current protection by potentiometers with measuring and displaying the output voltage and current using a microprocessor and LCD display with adjustable voltage range of 0 - 30V and current 0-3A. The thesis also includes design of power transistor cooling and the results of testing functional prototype.
|
guest ::
