Název: Results of comparative damage detection case study
Autoři: Bayer, Jan ; Urushadze, Shota
Typ dokumentu: Příspěvky z konference
Konference/Akce: Engineering mechanics 2025. International conference /31./, Medlov (CZ), 20250512
Rok: 2025
Jazyk: eng
Abstrakt: A significant amount of attention has been devoted to rapid bridge testing in recent years at the Institute of Theoretical and Applied Mechanics. New methods, such as the Vehicle Scanning Method and Moving Impulse Load Testing, have been developed and/or tested on a scaled laboratory bridge model. This article summarizes all conducted tests, discusses the evaluation methods used, presents the results obtained, and explores possibilities for their improvement. Among the tested methods, the application of Moving Impulse Load (MIL) moving at slow speed, with an excitation frequency around the first natural frequency of the tested bridge, appears to be the most promising. Two passages of the MIL allow for an approximate estimation of the dominant natural frequencies, while repeated passages at small velocity increments provide an excellent means of detecting changes in structural stiffness.
Klíčová slova: bridge testing; damage detection; moving impulse load; vehicle scanning method
Číslo projektu: CK04000042, EH23_020/0008487
Poskytovatel projektu: GA TA ČR, GA MŠk
Zdrojový dokument: Engineering mechanics 2025. Book of full texts, ISBN 978-80-86246-96-3, ISSN 1805-8248

Instituce: Ústav teoretické a aplikované mechaniky AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v repozitáři Akademie věd.
Původní záznam: https://hdl.handle.net/11104/0366379

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-679006


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav teoretické a aplikované mechaniky
Konferenční materiály > Příspěvky z konference
 Záznam vytvořen dne 2025-05-24, naposledy upraven 2025-06-08.


Není přiložen dokument
  • Exportovat ve formátu DC, NUŠL, RIS
  • Sdílet