Original title:
VÝVOJ A OPTIMALIZACE PLNĚNÍ CHROMATOGRAFICKÝCH KOLON
Translated title:
DEVELOPMENT AND OPTIMIZATION OF PACKING CHROMATOGRAPHIC COLUMNS
Authors:
Černá, Kateřina ; Kozlík, Petr (advisor) ; Kubíčková, Anna (referee) Document type: Master’s theses
Year:
2022
Language:
cze Abstract:
[cze][eng] Cílem této diplomové práce byl vývoj a optimalizace plnění nové řady chromatografických kolon s názvem Astra s následnými analytickými měřeními za účelem stanovení kvality optimalizovaných plnících procesů, kvality plněných kolon a za účelem zkoumání chování stacionárních fází. Vyvinuty a zoptimalizovány byly plnící procesy pro následující kolony - Astra C18-HE, AQ a DM 5 µm (250/150/100×4,6 mm, 150/100×3,0 mm), Astra C18-HE 3 µm (250/150/100×4,6 mm, 150/100/50×3,0 mm, 150/100/75/50×2,1 mm), Astra AQ 3 µm (150/100×4,6 mm, 150/100/50×3,0 mm, 150/100/75/50×2,1 mm), Astra DM 3 µm (150/100×4,6 mm, 150/100×3,0 mm, 150/100/50×2,1 mm) a pro zwitteriontové kolony 3 µm (150×4,6 mm, 100×2,1 mm). Během vývoje plnících procesů byly zoptimalizovány následující plnící parametry. Složení suspenzního roztoku - cyklohexanol:chloroform (1:10) pro SF C18, AQ, DM a gycerin:methanol (1:3) pro zwitteriontové SF; koncentrace plnící suspenze; způsob předplnění kolony - předplnění plnící kapalinou (methanolem); PID parametry, zde byly zvoleny hodnoty P = 3000, I = 100 a D = 100; šířka předkolony, ta musí být rovna či větší než vnitřní průměr kolony; tlak a čas plnění; typ hardwaru kolony byl zvolen modulární. Zároveň byly vyvinuty QC metody pro měření testovacího standardu Arion mix 3 za účelem kontroly kvality těchto...The aim of this thesis was to develop and optimize the packing of a new series of chromatographic columns called Astra with subsequent analytical measurements to determine the quality of optimized packing processes, the quality of the columns and to investigate the behavior of stationary phases. The packing processes for the following columns were developed and optimized - Astra C18 HE, AQ and DM 5 µm (250/150/100×4,6 mm, 150/100×3,0 mm), Astra C18-HE 3 µm (250/150/100×4,6 mm) , 150/100/50×3,0 mm, 150/100/75/50×2,1 mm), Astra AQ 3 µm (150/100×4,6 mm, 150/100/50x3,0 mm, 150/100/75/50×2,1 mm), Astra DM 3µm (150/100×4,6 mm, 150/100x3,0 mm, 150/100/50×2,1 mm) and for zwitterionic columns 3µm (150×4,6 mm, 100×2,1 mm). During the development of the packing processes, the following packing parameters were optimized. Composition of the suspension solution (slurry) - cyclohexanol:chloroform (1:10) for SF C18, AQ, DM and glycerin:methanol (1:3) for zwitterionic SF; concentration of the packing suspension; column pre-filling method - pre-filling with packing liquid (methanol); PID parameters, the values P = 3000, I = 100 and D = 100 were chosen; width of the pre-column, which must be equal to or greater than the inside diameter of the column; packing pressure and time; the column hardware type was chosen...
Keywords:
HPLC; packing of HPLC columns; HPLC; plnění HPLC kolon
Institution: Charles University Faculties (theses)
(web)
Document availability information: Available in the Charles University Digital Repository. Original record: http://hdl.handle.net/20.500.11956/175193