|
|
Steel Load-bearing Structure of administrative building
Kašíková, Anna ; Barnat, Jan (referee) ; Bajer, Miroslav (advisor)
The thesis deals with the design of the load-bearing structure of an office building in Olomouc. The ground plan dimensions of the hall are 36 × 36 m, the height of the main nave is 17 m (4 GF), side 10. 7 m (3 GF). The spatial beam structure is formed by symmetrical transverse frame links in one direction, in the other direction by horizontal hinged elements. The roof structure is made of truss girders pin-supported on pillars at the main nave, and a flat roof beside the nave. The pillars are placed on the joints and spatial rigidity of the structure provides system of space bracings. The main material is S275.
|
|
|
Static design of the structure composed of combination of steel and structural glass
Potůčková, Simona ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The objective of the bachelor thesis is to design the load-bearing construction system and its cladding made of a combination of steel and structural glass and to verify its sufficient resistance. The object has rectangular floor plan with dimensions of 7,5x10,5 m and and its total height is 24,5 m. The building is located at the suburban area of the city Ostrava, precisely Ostrava Poruba. The construction is composed of a ground floor and six upper floors. The main load-bearing system consists of steel frame formed by six tubular columns connected beams and sway bracings ensuring the spatial rigidity of the structure. The object was designed according to currently valid standards using ULS and SLS verification.
|
|
|
Load bearing structure of a multi storey building
Janči, Michal ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
Diploma thesis deals with the design and assessment of the load bearing structure of a multi-storey building, proposed by the combination of two materials, steel and glued laminated timber. The building has a V-shape, the angle between legs is 120 °. Floor plan dimensions of one arm of the building are approximately 40x20m, building height is 24.3 meters. The building is designed with a flat green roof. The load bearing structure is solved as a heavy frame, lower three floors are made of steel and serves as the business premises, top four floors are residential, and their structure is designed of the glued laminated timber. Bracing of the whole structure is solved by a system of crossed steel rods.
|
|
|
Theatre House in Přerov
Tichák, Tomáš ; Sýkora, Karel (referee) ; Barnat, Jan (advisor)
The main purpose of this work is a structural design of the building of theatre in Prerov city. The building has irregular shape. The structure is 72 m long, 54 m wide and 14,5 m high. Footprint equals to 2000 m2. Timber part of the building consists of glued laminated timber elements, as well as solid-sawn timber and steel ones. Steel part of the building includes tnasversal joint frames, composite steel and concrete ceilings, truss girders and bracings. This document includes design, internal force enumertion and structural assessment, including joints. Dlubal RFEM 5 structural analysis and design software has been utilized in the process. Drawings of the structure are enclosed.
|
|
|
Shopping centre
Kántor, Albert ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The aim of this diploma thesis is a design of a bearing structure of a shopping center, situated in Brno. The structure is a U-shaped building with horizontal dimensions 120 x 45 m. In the front of the building there is a structure in a shape of a tower 24 m tall that is embedded into the main part. Beside this part, the building is covered with green roof. Materials used are steel S355 and concrete C25/30. The structure consists of columns and horizontal beams. The stiffness is secured by vertical stiffeners and by floor structures from reinforced concrete. Two variants were designed and compared. One is composite steel and concrete structure, the other one is just a steel structure. After evaluating both variants, the composite one was chosen and elaborated in more detail. Calculations were done according to valid Eurocodes.
|
|
|
The design of multi-storey building
Hardubej, Martin ; Girgle, František (referee) ; Švaříčková, Ivana (advisor)
The aim of the thesis is the design and assessment of selected elements of a new build multi-storey office building. The supporting structure of monolithic reinforced concrete skeleton is modeled SCIA Engineer and burdened set load cases and combinations. The outputs of the internal forces of the calculation program are dimensioned selected elements. Selected elements include locally supported slab, columns, column shoes, basement wall and footing still. The thesis is selected reinforced concrete elements assessed on the ultimate limit state. The output of this work is static calculation of individual elements. Another part of the output consists of drawings solved elements.
|
|
|
Multi-storey car park
Balhar, Martin ; Balázs, Ivan (referee) ; Sýkora, Karel (advisor)
This thesis deals with design of steel structure multi-storey garage. It is the five-storey steel structure of rectangular plan. The construction is designed for the city of Olomouc. Static calculation is solved by a combination of manual calculation and calculation using software Scia engineer 18. There are the following main load bearing structural elements designed and examined in the structural analysis: truss, purlin, bracing, column, composite beam, joints, foot and anchoring. Thesis includes drawing documentation
|
|
|
Multi-storey building
Surovec, Daniel ; Bajer, Miroslav (referee) ; Štrba, Michal (advisor)
The object of this thesis is to design and assess steel structure of multi-storey office center in Vsetín. Floor plan dimensions of building are 48x40m. The building has ten floors. Overall height is 35,5m. The building ceilings made of composite steel and concrete structure. The part of build are roofer atrium and one bigger room aula with dimensions 24x16m. Two construction variants were designed and assessed. Longitudinal and transverse rigity of variant A is ensured by truss bracing. Transverse rigity of variant B is ensured by truss bracing and longitudinal rigity is braced by bracing frames. The variant A is better.
|
|
|
Seismic Design of Structural Steel Connections
Sotulář, Jiří ; Šabatka,, Lubomír (referee) ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
The thesis deals with the analysis and standard check of structural steel connections subjected to seismic loads. Analysis is based on a software solution and standard check is performed according to standard requirements and formulas. The first part deals with the theory of seismic load. There are described the general knowledges about the earthquake and the method of determining the effects of seismic loading on buildings according to the EN 1998-1. In the second part of the thesis is made design and check seismically loaded multi-storey steel building. Design is based on recommendations of the EN 1998-1 and some recommendations of research. In the third part is the analysis, verification and check of steel joints, which are contained in the structure designed in the second part of the thesis. On the basis results of analyses of indivudual connections are defined recommendations and requirements for the use and design structural steel connections subjected to seismic loads.
|
|
|
Multi-storey building
Stavrovský, Jiří ; Straka,, Bohumil (referee) ; Sýkora, Karel (advisor)
This thesis deals with design of steel structure multi-storey garage. It is the six-storey steel structure of rectangular plan with dimensions of 35,2 x 83,2 m and a height of 18,5 meters. The structure is designed for the site Brno. Static calculation is solved by a combination of manual calculation and calculation using software Scia engineer. There are the following main load bearing structural elements designed and examined in the structural analysis: truss, purlin, bracing, column, composite beam, joints, foot and anchoring. Thesis includes drawing documentation
|
guest ::
