|
| |
|
| |
|
|
A study of erosion control system using biotechnical conservation measures
Moravec, Jiří ; Sobotková, Veronika (referee) ; Dumbrovský, Miroslav (advisor)
The objective of the bachelor thesis was the study of soil erosion control with application of system of semi-natural measures in chosen small catchment. Digital elevation model was generated and average soil loss was determined by ArcGis tools at each erosion parcel . Design of erosion control at chosen erosion risked locality was create in Microstation software and InRoads utilities. As a type of enviromental erossion control mesures was chosen a system of a earthfill dams with the sedimentation area in combination with grassing. The thesis efforts to point the differences between the possible optimal solution and a compromise solution which respects the requirements of agricultural entities. The solution respects the trend of water retention in landscape and use of low cost measures.
|
|
|
Personal elevator for a residential building
Moravec, Josef ; Poledna, Jan (referee) ; Pokorný, Přemysl (advisor)
Master’s thesis deals with application of new suspension means for personal elevator instead of conventional steel wire rope includes calculation of traction. Followed by assessment of passive resistance generated by guiding elevator on guide rails and caused by various locations of suspension and guiding (car guide rails). In the last part of thesis contains a strength analysis of car frame by Finite elements method (FEM) in programme NX I-deas.
|
|
| |
|
|
Simulation and modeling of free body dynamic inside sea drifter
Moravec, Jakub ; Věchet, Stanislav (referee) ; Hadaš, Zdeněk (advisor)
This thesis deals with the development of a simulation model of an energy harvester based on the electromagnetic resonator principle. The introduction focuses on a search of the devices created so far for the conversion of kinetic energy of the sea into electrical energy. Furthermore, a model of the resonator design tuned to a frequency of 1.6 Hz is created in the body dynamics program MSC Adams. Simulations are performed in this program to analyze the resonator properties. Finally, the model is tested by real sea excitation. From these simulations, the electrical power obtained by this device is then predicted. Under regular sea excitation, the harvester power reached instantaneous peak values of 5 W and in case of irregular sea excitation the peak power values reached up to 16 mW.
|
|
|
Manufacturing of a hinge
Moravec, Jiří ; Žák, Ladislav (referee) ; Podaný, Kamil (advisor)
The project presents design of technology production of the hinge made of metal sheet plate 11 321. The variant proposed solutions have been designed manufacturing cutting and bending technology in transfer combined die. These themes were elaborated in literatures studies. As a working machine was selected eccentric press LEN 40 C of Slovak producer TOMA INDUSTRIES s.r.o., Trnava, with a nominal force 400 kN. Functional parts are made of tool steel 19 436. In economic results was defined cost of one piece including manufacturers profit and the break-even point, which is coming after production of 151 966 pieces.
|
|
|
Independent front axletree of the bus
Moravec, Jan ; Prášil, Ludvík (referee) ; Prokeš, František (advisor)
In those diploma work was solved problems of independent trapezoidal axletree for low-floor bus - NB12 CITY firm SOR Libchavy s.r.o . Work was divided into two main features: solving wheel-suspension kinematics and strenght calculation sorted parts of wheel suspension by the help of finite element method. There was effected fatigue calculation sorted parts of wheel suspension according to „Resetova metoda“ of predicting fatigue damage flowing from so – called cutaway methodics of fatigue tests at the close of this work.
|
|
|
The sports centre
Moravec, Jakub ; Třeštíková, Ing Jana (referee) ; Berková, Petra (advisor)
This final thesis is a project of sports center in Brno Líšeň. This building has two floors and it is without basement. Building has irregularly-shaped floor plan. Main entrance is to ground floor. Hall with reception has no celling and it is opened up to celling of second floor. There is dominating flush facade in hall. Entrance to sanitary facilities and gym is from hall, next entrance from here is to wellness and office. Gym has higher celling height than others. This part forms ground part of building. There is staircase to second floor in the hall. In second floor there are some rooms for group physical excercising with lector. In second floor are next sanitary facilities Entrance to terrace is through gallery in second floor. Struktural system is created of sand lime blocks KM Beta. Sports center is roofed with flat roof, part of this is extensive green roof.
|
|
|
Sheet metal part manufacturing by drawing
Moravec, Jiří ; Podaný, Kamil (referee) ; Peterková, Eva (advisor)
The project developed in the frame of the bachelor study branch B2307-00 presents a proposal of acreation technology of a flange, which is to be a model of the roof lift. The part is made of steel 11 320. Due to the anticipated serial production of 10 000 pieces per year, a number of production options is considered. On the basis of literary studies of the issue of drawing, it is suggested a drawing by a metal tool with blankholder. Due to calculations of tensile strength and work, press LEN 40 C is suggested. Drawing tool is designed to require the most of standard components and is solved through the form of a normal rack fastened to the eccentric press LTN 40 C. Drawing punch and drawing die are made of tool steels 19 436.3 and heat-processed according to the drawing documentation.
|
guest ::
RSS feed.