|
|
Analysis of Fluctuation Processes of Solar Cells
Macků, Robert ; Chobola, Zdeněk (referee) ; Franc,, Jan (referee) ; Koktavý, Pavel (advisor)
The thesis deals issue of the silicon solar cells non-destructive testing. The manufacturing technology of solar cells currently features a very high level of perfection. Its further development appears to be limited by amongst other issues imperfect diagnostic methods. The objective of presented research consists in non-destructive studies of processes that influence specimen life and reliability. To this end, I will employ mainly noise based analytical methods in connection with observation of defect optical activities, capacitance measurement etc. These methods are closely related to some specimen bulk imperfections, crystal-lattice defect induced traps, local-stress-subjected regions and, finally, breakdowns, which might bring about specimen destruction. Based on a detailed study and understanding of transport processes, regions in which noise is generated can be identified and appropriate technological measures can be proposed and adopted. Presented research focuses, first of all, on the real solar cell structures, which are inhomogeneous in their nature and are difficult to diagnose. The significant part of this study is attend to the random n-level (in most case just two-level) impulse noise, usually referred to as microplasma noise. This noise is a consequence of local breakdowns in micro-sized regions and brings about reduction of lifetime or destruction of the pn junction. The micro-sized regions have been studied separately by electrical and optical methods and defect properties have been put forward. Nevertheless, no less significant part of the thesis is devoted to the fluctuation modeling of the bulk imperfections in the semi-analytical form.
|
|
|
Quantum efficiency measurement of optoelectronic components and development of experimental equipment
Lipr, Tomáš ; Palai-Dany, Tomáš (referee) ; Macků, Robert (advisor)
This thesis deals with the issue of quantum efficiency measurement of optoelectronic devices. The physical nature of silicon solar cells is explained here. In addition, the quantum efficiency as a concept is introduced. There is also discussed the influence of a solar cell semiconductor structure on the quantum efficiency itself. Furthermore, the thesis is focused on the design of an experimental set-up for automated measurement and data acquisition. The final realization of the step motor control unit is described in detail. It includes local and/or remote operations, design and development motivation. The next chapter is dedicated to analysis of the Matlab source code for remote operation, data acquisition and presentation. The final part of the thesis gives attention to experiments with real structures, not only the solar cells. The obtained results of analyzed measurements are presented at the conclusion.
|
|
|
Noise diagnostic of solar cells
Krahulec, Martin ; Macků, Robert (referee) ; Sadovský, Petr (advisor)
The thesis deals with detailed theoretical and experimental investigation of noise and transport characteristics of selected photovoltaic cells in both forward and reversed directions focusing on the area of local PN junction instability (within the microplasma regions). It will be studied the correlation among different characteristics.
|
|
|
Characterization and preparation of PVDF nanofiber matrices for wearable electronics
Zajacová, Lucia ; Papež, Nikola (referee) ; Macků, Robert (advisor)
The presented bachelor thesis deals with the process of production PVDF nanofiber matrices uising electrospinning and subsequent electrical characterization of the produced material. At the beginning, it introduces nanotechnologies and their undeniable importance in medical applications. It focuses on the influence of process parameters, production enviroment and the very properties of the spinning solution itself, leading to final character of the spun fiber. Various morphological differences obtained by individual process settings then continue to influence their piezoelectric properties, which are the subject of the reaserch in the experimental part of this thesis. The obtained results are applied to devices uising the piezoelectric effect with the potential for application in the biotechnological fields.
|
|
|
Electrical characteristics of graphene layers and their use as gas sensors
Kučera, Štěpán ; Kaspar, Pavel (referee) ; Macků, Robert (advisor)
This bachelor thesis focuses on the general characterization and description of graphene and related nanostructures. It involves production by the most used methods, including their advantages and disadvantages. Due to the impossibility of connection in the usual way, the graphene sample had to be contacted under visual inspection with a microscope with the tip contacts in the shielded area. Subsequently, it was subjected to current-voltage characterization with normal conditions on a Keithley 4200-CSC instrument. The next step was to measure the same sample under a different gas atmosphere. The result is a comparison of the specific responses to the change in gas atmosphere in which the graphene monolayer was exposed.
|
|
|
Piezoelectric nanofiber materials for wearable electronics
Frolíková, Štěpánka ; Škarvada, Pavel (referee) ; Macků, Robert (advisor)
This thesis deals with the influence of production parameters on the morphology of PVDF nanofibers produced by electrospinning. Nanofibers are generally a widely used material, nanofibers are generally a widely used material, they can also have piezoelectric properties, which gives them a specific spectrum of use, eg in biosensors. The production of nanofibers was realized by electrospinning. A scanning electron microscope was used to examine the morphology and surface properties. The aim of this thesis is to compare the properties of PVDF nanofibers produced under different settings of production parameters.
|
|
|
Thin-Film Solar Cells Characterization and Microstructure Defect Analysis
Škvarenina, Ľubomír ; Šály,, Vladimír (referee) ; Fejfar, Antonín (referee) ; Macků, Robert (advisor)
Thin-film solar cells based on an absorber layer of chalcogenide compounds (CIGS, CdTe) are today among the most promising photovoltaic technologies due to their long-term ability to gain a foothold in mass commercial production as an alternative to conventional Si solar cells. Despite this success, the physical origin of the defects present in the thin films are still insufficiently elucidated, especially in the compounds of the chalcopyrite family Cu(In_{1x},Ga_{x})(S_{y},Se_{1y})_{2}. The research focuses on the identification and analysis of microstructural defects responsible for the electrical instability of chalcopyrite-based thin-film solar cells with a typical heterostructure arrangement ZnO:Al/i-ZnO/CdS/Cu(In,Ga)Se_{2}/Mo. The non-uniform polycrystalline nature of semiconductor materials in this complex multilayer structure requires a comprehensive analysis of electro-optical, structural and compositional properties associated with the actual morphology at the macroscopic, microscopic or even nanoscopic level. The observed predominant ohmic or non-ohmic current conduction in the dark transport characteristics was also reflected in the slope deviations of the excessive noise fluctuations, which were in the spectral domain exclusively in the form of flicker noise with dependency S_{i} ~ f^{1}. Spatially resolved electroluminescence based on stimulated photon emission by charge carriers injecting into the depletion region, not only showed a significantly inhomogeneous distribution of intensity in planar heterojunction under forward bias, but also revealed light emitting local spots in reverse bias due to a trap-assisted radiative recombination through the high density of defect states. Microscopic examination of the defect-related light emitting spots revealed rather extensive defective complexes with many interruptions through the layers, especially at the heterojunction CdS/Cu(In,Ga)Se_{2} interface. Besides, the high leakage current via these defective complexes subsequently led to a considerable local overheating, which caused a clearly observable structural and morphological changes, such as deviations in absorber layer stoichiometry due to Cu–In–Ga–Se segregation, Cu-rich and Ga-rich grains formation with an occurrence of Se-poor or Cu_{x}Se_{y} secondary phases regions, material redeposition accompanied by evaporation of ZnO:Al/i-ZnO/CdS layers together with the formation of Se structures on the surface around the defects. Within the research, analytical modelling of transport characteristics was implemented with parameters extraction of individual transport mechanisms to understand the non-ohmic shunt behaviour due to leakage current. In addition to the proper current path along the main heterojunction, the proposed model contains parasitic current pathways as a consequence of recombination-dominated charge transport or current conduction facilitated by multi-step tunnelling via high density of mid-gap defect states in the depletion region, ohmic leakage current caused by pinholes or low-resistance paths along grain boundaries in Cu(In,Ga)Se_{2}, or space-charge limited current due to metals diffusion from the ZnO:Al layer and grid Ag contacts through disruptions in i-ZnO/CdS layers.
|
|
|
The benefits of outdoor course for social relatioships development in school classes
Kalkusová, Lucie ; Slepička, Pavel (advisor) ; Janíková, Marcela (referee) ; Macků, Richard (referee)
Title: The benefits of outdoor course for social relationships development in school classes Objective: The aim of the thesis was to examine how the outdoor course focused on teambuilding and social relationships development influences the structure and quality of social relationships in adolescent school classes. Methods: The research sample was created by 211 13 years old secondary school students (128 girls; 83 boys; average age 13.3±SD years) who participated on a 6-days outdoor course. The course was designed using the principles of dramaturgy to meet its objectives - let the students get to know each other and their teachers better, induce positive social relationships, a cooperative atmosphere, a sense of trust and safety in the class. The students filled in the questionnaire before the course, straight after the course and 3 months after finishing the course. It was a combination of preferential record, sociometric questions (choosing classmates for a birthday party and deserted island), B3 test and two open-ended questions mapping the preference of programme resources. The results were first analysed for each class to see what happened in each group and then all classes were summarized. Primary data were analysed by non-parametric Friedman's test, statistical significance between the...
|
|
|
Field measurement of natural electromagnetic emissions near the active tectonic and mass-movement fractures in caves
Trčka, T. ; Macků, R. ; Koktavý, P. ; Škarvada, P. ; Baroň, I. ; Stemberk, Josef
Laboratory tests on a wide range of solid materials shoved that the electromagnetic emission (EME) signals are generated during the samples mechanical stress. EME anomalies have been observed also under natural conditions in association to fracture processes, tectonic loading, stress redistribution and crack propagation prior to earthquake or in relation to deep-seated gravitational mass movements. This paper describes a first prototype of the Emission data logger, which was specially developed for the continual EME monitoring in field conditions. Our equipment has been installed and tested in Obir Caves (Austria) at an active tectonic fault. The pilot long-term EME measurement results from this location are also presented in this paper.
|
|
|
Analysis of Fluctuation Processes of Solar Cells
Macků, Robert ; Chobola, Zdeněk (referee) ; Franc,, Jan (referee) ; Koktavý, Pavel (advisor)
The thesis deals issue of the silicon solar cells non-destructive testing. The manufacturing technology of solar cells currently features a very high level of perfection. Its further development appears to be limited by amongst other issues imperfect diagnostic methods. The objective of presented research consists in non-destructive studies of processes that influence specimen life and reliability. To this end, I will employ mainly noise based analytical methods in connection with observation of defect optical activities, capacitance measurement etc. These methods are closely related to some specimen bulk imperfections, crystal-lattice defect induced traps, local-stress-subjected regions and, finally, breakdowns, which might bring about specimen destruction. Based on a detailed study and understanding of transport processes, regions in which noise is generated can be identified and appropriate technological measures can be proposed and adopted. Presented research focuses, first of all, on the real solar cell structures, which are inhomogeneous in their nature and are difficult to diagnose. The significant part of this study is attend to the random n-level (in most case just two-level) impulse noise, usually referred to as microplasma noise. This noise is a consequence of local breakdowns in micro-sized regions and brings about reduction of lifetime or destruction of the pn junction. The micro-sized regions have been studied separately by electrical and optical methods and defect properties have been put forward. Nevertheless, no less significant part of the thesis is devoted to the fluctuation modeling of the bulk imperfections in the semi-analytical form.
|
guest ::
RSS feed.