|
|
Design of computational algorithm for using of hollowed shaft in electric machine
Tobiáš, Jan ; Hadaš, Zdeněk (referee) ; Vlach, Radek (advisor)
The aim of this work is to develop the possibility of usage the hollow shafts in electric machines. The first part focus on explanation theory of mechanic, which is connected with loading of the shaft. Specifically are explained the methods of computation deformation and normal stress. Next is mentioned the theory of gyroscope and described its consequence. After that is explained problematique of critical speeds. In the following part is described process of solving the shaft loading according the previous analytic formulas. These formulas are formulated to be able to reflect the shaft loading depending on value of inner diameter as property. Practical part focus on creating the calculator for usage the hollow shaft in electric machines. In this chapter is described how the calculator works and how to controll it by user. In the last part are shown calculated results and their analysis. In the summary is mentioned possible usage of the results and ideas for improvements.
|
|
|
Dynamic Analysis of Selected Firing Mechanisms of Firearms
Mešina, Matej ; Hadaš, Zdeněk (referee) ; Slažanský, Martin (advisor)
This bachelor thesis strives to evaluate the dynamic analysis of firing mechanisms of different types of firearms. In the present research is analyzed the matter of firearms and ammunitions, followed by the description of distribution of firearm mechanisms, as well as the detailed scrutiny of the initiation mechanism. The thesis also marginally explores the testing of primers. The last part of the research documents the possible solutions for the analyzed issues. The practical part of the thesis is devoted to the geometry of firing mechanisms, followed by the description of the physical principles, which are relevant to this matter. Based on the analysis, a theoretical calculation of the initiation energies for all of the analyzed types of firearms is established. Lastly, the calculation of the initiation energy is calculated, and the security in secure firing of the bullet's primer is determined.
|
|
|
Design of electronic subsystem for reduced gravity impact simulator
Ostrý, Lubomír ; Hadaš, Zdeněk (referee) ; Věchet, Stanislav (advisor)
The focus of this thesis is development of an electronic subsystem for reduced gravity impact simulator. The research part of this thesis firstly covers methods used for simulation of microgravity or reduced gravity and compares them. Another part of research focuses on three selected potential approaches to creating the electronic subsystem for this device. The second, practical, part of this thesis describes the design and development of the electronic subsystem. The foundation of the electronic subsystem is a control unit which has been developed on the basis of an STMicroelectronics microcontroller. Using the control unit, the electronic subsystem measures pressure, position, acceleration and force in the system. Another task of the control unit is control of a stepper motor. Integration of individual elements into the electronic subsystem is described both in terms of software and hardware. Furthermore, a graphic user interface program for PC has been developed as a means to interact with the system. In the final part of the thesis, the operation of the electronic subsystem is described and lastly, the electronic subsystem is evaluated.
|
|
| |
|
|
Analysis of Smart Materials
Rašner, Martin ; Lošák, Petr (referee) ; Hadaš, Zdeněk (advisor)
The bachelor's thesis "Smart Materials Analysis" deals with the description of intelligent materials in the way of usability in technical practice. At first, the research of smart materials is carried out, which is further elaborated on a detailed description of shape memory materials. In order to investigate the functionality of the material and the description of its behaviour in terms of non-linear oscillation, a simplified model is proposed. The practical part deals with the application of passive damping of Nitinol. The solution is accomplished by modelling program MATLAB / Simulink.
|
|
|
Retention Reservoir Design in the Police Cadastr
Hadaš, Zdeněk ; Menšík, Pavel (referee) ; Starý, Miloš (advisor)
This thesis deals with the river basin flood protection Loučka. The goal of the thesis is to assess the need of flood control measures supplement in the watershed. The first part deals with exploration of river basin, acquiring geographic factors and obtaining information about the topic, establishment and application of rainfall model used for solving the problem. The second part deals with improving of flood protection at critical selected places by using design of reservoir system with retention effect and by increasing river basin capacity. For basin schematisation was used ArcGIS program and the simulation of rainfall-runoff process was made by Hydrog program.
|
|
|
Design and realisation of 3D printer with high resolution of print
Peml, Luboš ; Hadaš, Zdeněk (referee) ; Dušek, Daniel (advisor)
This thesis deals with the design and realisation of the stereolithographic 3D printer using DLP projector. The work describes the selection of suitable components for the printer´s mechanical construction and manufacturing of this construction, the solution of printer´s electronics and creation of the printer´s host software and firmware. Recommendations based on executed experiments for the parameters´ values settings have been given here.
|
|
|
Simulation modelling of blower system
Gajdík, Michal ; Švancara, Pavel (referee) ; Hadaš, Zdeněk (advisor)
This diploma thesis is focused on simulation modeling of Roots blowers, which are produced by Kubicek VHS company. First part of this thesis is about oscillations and its damping. In following phase are analyzed each methods realization and control of oscillation damping. Second part of this thesis is focused on Roots blower modelling with rigid and flexible parts and its verification. Output of this thesis is dynamic analysis of Roots blower 3D28C. On attached CD are program annex and project in Adams MSC. Aim of this thesis is proposing adjustments, which would reduce noise and vibration of analyzed machine.
|
|
|
Analysis of railway motor-generator set
Mánek, Petr ; Hadaš, Zdeněk (referee) ; Ondrůšek, Čestmír (advisor)
This work is focused on using of modal analysis in power electrical engineering. The first part of the work explains the term of CAD systems and provides their basic classification. The next section of this thesis describes procedure for creating models in Autodesk Inventor 2012. There is shown creation sketching, 3D components, assemblies and possibility of presenting the models. Next part of this thesis describes the finite element method and the program ANSYS Workbench. In the next part of this thesis is shown sample of calculation of modal analysis in the program ANSYS Workbench. There is a description of modal analysis, synchronous machines, the process of calculating of modal analysis and evaluation of the results. The last section of this thesis describes creation of animation of the railway generator set in the program Inventor Studio.
|
|
|
Virtual Prototype of Electrical Machines in ADAMS
Lysák, Jan ; Hadaš, Zdeněk (referee) ; Vetiška, Jan (advisor)
The following thesis deals with the methodology of mechatronic systems design using virtual prototypes. Virtual prototype contains a computer simulation model, whose behaviour represents a physical prototype system. This approach allows to obtain knowledge about the behavior of the developed product before it‘s manufacturing. This leads to shortening new product innovation cycle and lowering the cost of innovation. The first part contains a brief search study of electrical machinery and description of the virtual prototyping. Then the prototypes of electric drives are created, that can be implemented into the more complex machine systems. The work also includes the realization of co-simulation and control design for one of the drives.
|
guest ::
