|
|
Analysis of Motivational Factors, Reward System and Evaluation of the Chosen Company
Josefiová, Michaela ; Ing. Zdeněk Málek, Ph.D (referee) ; Konečný, Štěpán (advisor)
This diploma thesis deals with the topic of the motivational factors identification and the employee´s reward system evaluation. The theoretical part explains the basic terms related to motivation, rewarding and evaluation. The practical part is focused first on the description of the chosen company and its current reward system. The results of my research follow – the evaluation of questionnaires and conducted interviews with employees and company´s management. In conclusion, I will summarize all the important findings and suggest solutions which could help to improve the reward system and motivating to the mutual satisfaction of employees and management.
|
|
|
Solar Radiation Measurements
Mazoch, Jan ; Málek, Petr (referee) ; Beneš, Petr (advisor)
This Bachelor's thesis discusses design and verification of an inexpensive method for indicative measurement of direct and diffused solar radiation, in order to estimate the heat gain of buildings. Theoretical part focuses on the analysis of solar energy and types of measuring devices. Practical part presents results of patent research and market research. The design of an ideal solution of a measurement circuit is also presented here. The last chapter concentrates on the practical verification of selected inexpensive sensors. It includes the design of a suitable datalogger and measurement circuit, plus the comparison of measured data with reference sensor. The conclusion is devoted to describing possible solution for the sensor which should be applicable in operating conditions.
|
|
|
Flow Measurement - oriffice plates
Krátká, Lucie ; Málek, Petr (referee) ; Šedivá, Soňa (advisor)
The aim of the Bachelor thesis is to approximate the fluid flow measurement using differential pressure transducers inserted into fully filled circular cross-section conduits running full in the industrial sector. The introduction of the Bachelor thesis describes and explains the principle of fluid flow measurement using differential pressure transducers and the basic types of primary flow elements. Practical part consists of the design of practical calculations of individual parameters of standardized orifice plates, the design of a program for calculation of these parameters, comparing the achieved results with the output from the program Conval, evaluating these results and analyzing the measurement uncertainties for the parameters that affect the design of the standard orifice plate.
|
|
| |
|
|
Operation and Managment of Shootgun Shooting Sports Club
Herberger, Daniel ; Málek, Petr (referee) ; Kundera, Václav (advisor)
The object of this work is the analysis, evaluation, and subsequent proposals to improve the operation of sport shooting club SSK Activ Sport. The theoretical part describes the theoretical background related to the issue, the practical part is focused on the analysis of the current state of the club, its competitors and the revenues resulting suggestions for improvement in both service and marketing club.
|
|
| |
|
|
Simulation of the DVB-T digital modulation in Matlab
Málek, Pavel ; Říčný, Václav (referee) ; Kratochvíl, Tomáš (advisor)
Digital Video Broadcasting (standard DVB) is a system for transmission of the television signals in the digital form. There are used a various types of modulations in this system as QPSK modulation is used in the systems of satellite video broadcasting DVB-S (Satellite) and M-QAM modulations in the cable transmitting DVB-C (Cable). This paper mainly deals with system of the terrestrial digital video broadcasting DVB-T (Terrestrial), where OFDM modulation is used. This type of signal processing is more resistant to the distortions caused by multipath transmitting, which is main problem in the DVB-T. Matlab application, which can simulate digital modulation and demodulation of the transmission signals in the DVB-T, is created in this thesis. The models of the transmission channel is inserted between structures of modulator and demodulator. The user of this application can set the parameters of the broadcasting (e.g. constellation, OFDM mode, guard interval insertion) and the type of distortions (additive noise, reflected and delayed signals). By calculation of the channel bit error rate (BER) user can study influences of broadcasting parameters to the quality of transmission.
|
|
|
Franchising Concept for Develoment of Car Repair Service
Konečný, Lukáš ; Málek, Petr (referee) ; Koráb, Vojtěch (advisor)
Master's thesis deals with the possibility of expansion and the expansion of existing business with franchising chain.The creation of own franchising concept is still very scarcity in The Czech republic, because the possibility of expansion is not sufficiently well known to Czech entrepreneurs. The outcome of the work will be proposing the concept of franchising for the company AUTO HORÁK. The concept is designed to allow a basis for its expansion.
|
|
|
Multimaster communication over long distances
Hedvíček, Michal ; Málek, Petr (referee) ; Uher, Miroslav (advisor)
This bachelor project deals with a theoretical analysis of employed serial buses and a comparison of their qualities especially with regards to a medium-range distance. Also, it considers the possibility to extend I2C-bus by special circuits, which guarantee communication for longer distance. Next deals with measuring draft program for the collection and evaluation of measurement data. Following measurement itself and evaluation parameters of signal on the bus under different conditions.
|
|
|
Ladislav Klíma. His Reception in Czech Culture
Klíma, Matěj ; Vojtěch, Daniel (advisor) ; Kosák, Michal (referee) ; Málek, Petr (referee)
The thesis deals with the reception of Ladislav Klíma's work and personality in Czech culture. It is divided into four sections. In the first one we focus on the reactions to his work during his lifetime. In addition to the reflection on the plays and published books, we also follow small magazine polemics and partially explain the biographical background of published books. In the second section we examine the changes in the perception of Klíma after his death in 1928 until 1948. We present reviews of posthumously published books, obituaries and key interpretations of Klíma's thought. We examine the relations of avant-garde artists to Klíma and the personalities who significantly influenced the fate of his work. The third part presents reflections on Klíma's work after the communist coup in 1948 until the revolution in 1989. We look at the efforts to eradicate the author's name from cultural consciousness, marxist interpretations of his thought, the prominent authors of Czech literature who were influenced by him, interpretations from the 1960s, and the reception of his work in the alternative culture in the 1970s and 1980s. In the final section, we examine the situation of Klíma's reception after 1989, disputes over the approach to publishing Klíma's texts, selected interpretations and...
|
guest ::
