|
|
Technology Design of a Selected Part and Application of the Designed Changes in the Manufacturing Process
Turčín, Jiří ; Jaroš, Aleš (referee) ; Slaný, Martin (advisor)
This master thesis deals with a design of technological process description for a mechanical engineering part called „pressure plate“. The component is analyzed in regards to its mechanical engineering design and used material. Some brief theoretical prerequisites for an effective solution of the problem are summarized in the paper. A detailed research of current technological methods is provided, together with an analysis of the State-of-the-Art in manufacturing, introduction of technological possibilities of the company and a timeline records of the manufacturing process. In regards to the current methods and technologies, changes to the technological process are applied. Among these changes is a unification of machinery used in the process. This leads to an innovation of the methodology and the ways to clamp the component. Other applied alternations focus on a stabilization of the drilling process, which is reached by a choice of new tools and adjustment of cutting parameters. Furthermore, a variable coding of tools in case of automatic tool change is designed. This paper then provides two possible solutions based on proposed changes and alternations. These solutions, together with the tools mentioned, are subjects to a techno-economical assessment.
|
|
|
Implementation of information system
Škrabálek, Petr ; Luňáček, Jiří (referee) ; Osička, Karel (advisor)
This diploma thesis deals with the implementation of an information system for the operational management of small engineering companies with a focus on custom manufacturing. The thesis describes the current state of production control without support of the information system. Based on the identified shortcomings, the requirements and criteria for the new information system were developed. Then the selection of the information system and its implementation during production is dissected. At the end of the thesis there is described the production control with the support of the selected information system and the economic evaluation for acquisition of the information system.
|
|
|
Analysis of the MES Hydra Production Information System and Subsequent Optimization in the Selected Company
Voborný, Vojtěch ; Buršík, Filip (referee) ; Klčová, Hana (advisor)
The thesis focuses on the analysis of the processing informational system MES Hydra used by automotive company Jopp Automotive s. r. o.. Since the company does not use full potential of the described system, emphasis will be placed especially on the modules involved in the production process. The analysis will be carried out by user's perspective and also the actual implementation and suggestions about possible improving of user´s interface or potential application of additional options of the system will be considered. The integral part of the thesis are production schemes, on that facts and ideas for process optimalization controlled by the system will be discussed.
|
|
|
Preparation and application of PHA based nanofibres and nanoparticles
Linha, Vojtěch ; Skoumalová, Petra (referee) ; Márová, Ivana (advisor)
The goal of this thesis was to summarize basic options of fiber spinning and manufacturing and their usability in industry. Methods of nanofiber spinning are described in the teoretical part, alongside the materials used in experimental part. The experimental part was focused on creating of workflow of defined nanofibers in laboratory enviroment, the possible modification of nanofibers with aditives. The release of aditives from different nanofibers into different enviroments was measured.
|
|
| |
|
|
Výukový materiál pro předmět Logistika
ŠÍMA, Ondřej
This thesis is devoted to a draft of an teaching material for the subject of Logistcs at the Agricultural faculty of University of South Bohemia, which is specifically designed for the follow up field of study of Agricultural and transport technologies.
|
|
|
Revelation of the losses in manufacture
ŠAUEROVÁ, Lucie
The aim of this thesis was to analyze the contemporary manufacture and on this basis to find out the existing losses. For the exposure of losses in manufacture were used three methods. The first one was the observation which was focused on the warehouse, pressing and transport. Next sources, which were used within the analysis, were internal documents and dialogues with the employees of the company. All suggestions were designed in a way that could be applied in the practice and improve current economic situation in company.
|
|
|
Production technology of part barrel shroud
Jiráček, Jan ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
The study deals with technology of "sport steel" barrel shroud part made from a rod semi-product. It makes part of final assembly of a short firearm - ALFA steel revolver, Sport model, of ALFA - PROJ, Ltd. Czech company. Recherche introduction explains basic tooling (its history, tool material's development, milling and hole machining). Furthermore, it is submits an explanation to general arms division and analysis of barrel shroud technology suitability. The following technology process analysis describes the barrel shroud manufacturing process in the aforementioned company. Study's last part shows possible suggestions for manufacturing improvements and rationalizing measures.
|
|
|
Study of Order Processing in the Company
Bukovinský, Lukáš ; Kuba,, Karel (referee) ; Milichovský, František (advisor)
The bachelor's thesis deals with the study of passage contract now at Commscope Inc. It consists of a theoretical part, which explains the main concepts, analytical part, where is analysed the current passage contract now and concrete proposals, which are designed to suggest improvements that will help make passage contract more effective, optimal and speed it up due to reduce delivery time to the end costumer.
|
|
|
Study of the Order Processing Management with the Focus on Manufacturing Process Management
Balíček, Radim ; Hrobařová, Veronika (referee) ; Jurová, Marie (advisor)
This master thesis is focused on process of production management and scheduling in a selected company. In the first part the selected company has been described. The theoretical part contains an explanation of terms that relates to this topic. In the practical part, a process analysis of the current state of the process of production management and scheduling has been carried out, which detected certain deficiencies related to this process. The identified deficiencies are further interpreted and on the basis of the theoretical part, has been proposed a solution, which should lead to the elimination of these problems. In the final part of the thesis, the benefits of the proposed solution are determined.
|
guest ::
