|
|
Process performance planning
Stoy, Tomáš ; Smékal, Martin (referee) ; Fiala, Alois (advisor)
This thesis deals with the operational planning of production at DT – Výhybkárna a strojírna, a.s., specifically evaluating impacts of the passage of an exceptional order on manufacturing process. Aim is to analyze the current state of process management, to evaluate the impact of additional interventions into the processes and to quantify the costs associated with this intervention in the planned production. All with the minimum cost and maximum efficiency at a given quality. The goal is achieved by simulating of inserting an exceptional order in the enterprise information system.
|
|
|
HIL test stand for universal electronic control units
Zouhar, Štěpán ; Musil, Filip (referee) ; Brablc, Martin (advisor)
This diploma thesis is focused on testing of Electronic Control Units, especially functional testing in which hardware and software is verified and also Model in the Loop, Software in the Loop, Processor in the Loop and Hardware in the Loop testing methods. Within practical part of this thesis testing stand for functional test of the ECU was developed and manufactured. It is connected to PC via Input/Output card, testing is controlled by MATLAB script. Whole process of testing is automated from initial upload of testing firmware to tested ECU over all phases of test up to bootloader flashing. Hardware in the Loop test was also created, in which ECU works as controller and DC motor is simulated in real time with PC in MATLAB environment.
|
|
| |
|
|
Signal processing and receiving in UMTS system
Hron, Michal ; Hanus, Stanislav (referee) ; Kejík, Petr (advisor)
This semestral thesis be concerned with datailed analysis of receiving and processing signals in UMTS network system. Insistence of this work is setting to principals of RAKE receiver and processing signals in CDMA networks downlink channel. Through development system MATLAB simulates real function of RAKE receiver. This project is giving fundamental knowledges about receiving and processing of multipath signals to readers.
|
|
|
Electromagnetic analysis of circuit breaker tripping unit
Mlynář, Zdeněk ; Augusta, Zbyněk (referee) ; Valenta, Jiří (advisor)
Using circuit breakers as devices for protecting the circuit, equipment, property, and not least the people is an important part of the generation, transmission and distribution of electricity. This puts high demands on the design of complex devices such as circuit breakers. To ensure proper function is one of many parts and that is the trip unit. Trip unit is used to evaluate the current flowing through the breaker and respond to undesirable overcurrent. For these reasons, this work deals with electromagnetic analysis - specifically thermal magnetic trip unit. The focus will be on improving the actual situation and finding more suitable design solutions.
|
|
|
Traffic Situation Model
Dvořák, Michal ; Petyovský, Petr (referee) ; Horák, Karel (advisor)
In this thesis, parameters required for physical construction of model of traffic camera system are identified. The information is used to design and construct a model, which supports simulation of important traffic situations. With focus, on the ability of model to allow for digital modification of simulation parameters over, for this purpose created, communication interface. The next part of thesis then focuses on creation of application which supports the control and image retrieval from group of cameras. The application is designed to support settings necessary for use as average speed enforcement cameras and as red-light cameras.
|
|
|
Determination of electromagnetic field distribution around underground power cable
Gromotovič, Ivan ; Paar, Martin (referee) ; Vyčítal, Václav (advisor)
The thesis deals with the distribution of the electromagnetic field around the conductor in the way of laying the conductors. The paper describes the structure of the cables and their lettering. More detailed is described the underground cable and various ways of protecting the conductor against mechanical damage are shown. The functions of the locator of underground lines on the electromagnetic field principle are briefly described . In the practical part, in simulation software Ansys Maxwell has been designed models to simulate the layout of the underground line. The output of the thesis is the comparison of the results created by the simulations.
|
|
|
Measurement of vehicle moments of inertia
Grác, David ; Hejtmánek, Petr (referee) ; Porteš, Petr (advisor)
This diploma thesis is concerned with selecting the appropriate method for determining the moment of inertia to the vertical, lateral and longitudinal axis through the centre of gravity of the vehicle. Using the special mechanical device, constructed on IAE was carried out repeated measurements of known mass properties in each axis. With the aid of obtained data was calculated measurement error. To compare the resulting values was created MBS model.
|
|
|
Production of pinion by solid forming
Fic, Pavel ; Štroner, Marek (referee) ; Kopřiva, Miloslav (advisor)
In a present diploma thesis is detail study from volume hot-forming knowledge – forging. In thesis is make proposal of technologies how to produce a pinion d140 drawing nr.: DP2012 -01 and the optimatization of technology procedure with help a computer simulation. Quality of part is steel 14220. Semi-product is a bar 80 x 150 ČSN 42 5510.21. For presumtion series 160 thousand pieces and mechanical stressed working of piece is choose drop forging technology in the vertical forging press LMZ 2500, product of Šmeral Brno. From technical procedure were made necessary calculations and follow drawing documentation.
|
|
|
Optimization of the Wire Drawing Process
Kabilka, David ; Světlík, Radim (referee) ; Řiháček, Jan (advisor)
The aim of work is to present and analyse assessment of the current state and at the same time the proposal of adjustments to the technology or parameters, the introduction of the wire into the drawing machine. The problem arises when the introduction of wire with a diameter of 14 mm from the material CK 67 to the drawbenches Schumag. If we introduce the wire into the drawing machines with two primary beams leads to a buckling of the wire and pack between the drawing die and the boot device. For the introduction of wire are used hydraulic boot collets, which are controlled semi-automatically. In connection with professional studies and on the basis of the calculation, simulation and practical experiment have been identified the conditions allowing the current method of deployment of wire to use.
|
guest ::
