Název: Analysis of vibration of rotors with a thick rigid disc on the overhanging end supported by hydrodynamic bearings and loaded by uncertain unbalance effects
Autoři: Zapoměl, Jaroslav ; Ferfecki, P. ; Molčan, M. ; Kozánek, Jan
Typ dokumentu: Příspěvky z konference
Konference/Akce: Engineering Mechanics 2022 - International Conference /27./28./, Milovy (CZ), 20220509
Rok: 2022
Jazyk: eng
Abstrakt: Rotors of some rotating machines consist of a shaft and a rigid disc attached to its overhanging end. Because of manufacturing and assembling inaccuracies, the disc is unbalanced. In general case, the disc principal axis of inertia deviates from the shaft axis (both axes are skew lines) and the disc center of gravity is not situated on the shaft center line. Then the disc inertia effects are the source inducing the rotor lateral vibration. As magnitude of parameters specifying the disc unbalance is uncertain, application of an adequate method is required to perform the analysis. In addition, if the rotor is supported by hydrodynamic bearings, their nonlinear properties lead to rising complexity of the system vibration and to reducing its predictability. In the presented paper, the motion equation of a rigid disc has been derived. The shaft was represented by a beam body that was discretized into finite elements. The stiffness and damping parameters of the hydrodynamic bearings were linearized in vicinity of the rotor equilibrium position. Then vibration of the rotor is governed by a set of linearized motion equations. The fuzzy numbers were applied to consider uncertainty of the disc unbalance parameters. The presented procedure provides the approach to computational analysis of rotating machines with the rotor having a disc attached to its overhanging end and the geometrical, mechanical, or technological parameters of which have uncertain values.
Klíčová slova: fuzzy number approach; hydrodynamic bearings; rigid discs on overhanging end; rotors; uncertain unbalance parameters
Číslo projektu: LQ1602 (CEP)
Poskytovatel projektu: GA MŠk
Zdrojový dokument: Engineering mechanics 2022. Book of full texts, ISBN 978-80-86246-48-2, ISSN 1805-8248

Instituce: Ústav termomechaniky AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný na externích webových stránkách.
Externí umístění souboru: https://www.engmech.cz/improc/2022/409.pdf
Původní záznam: https://hdl.handle.net/11104/0338008

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-519831


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav termomechaniky
Konferenční materiály > Příspěvky z konference