Název: DELIVERABLE D9.6 Small sample testing
Autoři: Cikrle, P. ; Drdácký, Miloš ; Lesák, Jaroslav ; Slížková, Zuzana ; Válek, Jan ; Vavřík, Daniel ; Zíma, Pavel
Typ dokumentu: Výzkumné zprávy
Rok: 2004
Jazyk: eng
Abstrakt: A number of in-situ tests for mechanical material properties is readily available but there were developed improved methodologies which met the requirements and specifics of this project. It the case of historic masonry there was necessary to deal with a common additional problem, which is the testing of non-standards samples. This was for example a problem of testing of historic bedding mortars or renders, where a typical width of sample is around 10 mm. It comes along with the general need for small ů micro samples with regards to the protection of historic masonry where a minimum intervention is always required. Mechanical properties in bending were tested on non-standard mortar samples which were supplemented symmetrically on both ends with two 'prostheses'. According to the results of the tests comparing the flexural strength of pure mortar beams with the strength ascertained on prosthesized identical material the influence of prosthesization is negligible. Testing of stone samples involved comparison of the compressive and split tensile strength of specimens of standard dimensions and specimens of smaller dimensions
Klíčová slova: mortar; small samples; stone

Instituce: Ústav teoretické a aplikované mechaniky AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0013278

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-20015


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav teoretické a aplikované mechaniky
Zprávy > Výzkumné zprávy