|
| |
|
|
Using a heat pump
Tretera, Robin ; Křivík, Petr (referee) ; Jandová, Kristýna (advisor)
This diploma thesis provides basic information about the thermal pumps and photovoltaic systems. The heat pumps are described regarding their construction and sources of low potential heat. The description of photovoltaic systems explains the main principle of transformation the solar light to electric power and possible cooperation of this systems with the heat pumps. In practical part of the thesis there is a description of the assessed building and calculation of its thermal losses. It is followed by three designs of the thermal pump systems which are supposed to replace the original way of heating - the electric boiler. One of the designs is supported by photovoltaic system. The final part of the thesis provides the calculation of required heat sources for house and water heating, the operation expanses of all three heat pump designs, prices of electric energy and economical reliability of described solutions.
|
|
|
Reduction in energy intensity of the public object
Michek, Jan ; Chovancová, Jitka (referee) ; Vaňková, Lucie (advisor)
The thesis focuses on increasing energy efficiency of a public building. Firstly, the basic terms regarding public procurements are explained in general. A specific area of public procurements, especially contracting public procurements of small scale are studied next. The following part of the thesis is dedicated to the basic terms in the area of energy efficiency of buildings. The goal of the thesis is to evaluate all the procurement procedures related to a concrete public procurement of small scale, to evaluate the energy efficiency of the building before the realization and to reevaluate the energy efficiency including monitoring of the building after the realization.
|
|
|
Heating of flat house
Hánl, Jiří ; Počinková, Marcela (referee) ; Topič, Jan (advisor)
The theme of my bachelor´s thesis is heating proposal and hot water preparation in apartment house. The teoretical part is focud on applicability and constructional solution of fittings. The calculating part consists of heat source proposal, hot water preparation, distribution of heating water and heating elements design. In the building there are proposed two heat sources, the first one for heating water and the second one for hot water preparation. The heating elemets are panel, tubular and floor convectors. The project part consists of technical report and drawing doocumentation.
|
|
|
Indoor pool ventilation
Hrabová, Kristýna ; Uher, Pavel (referee) ; Rubinová, Olga (advisor)
The bachelor thesis designed ventilation for the pool hall. Hall is divided on four separate working units. The first device is designed as an air-conditioning unit for the changing room. For swimming pool were designed swimming pool air conditioning units with heat pump. Air in the hall with a water slide is adjusted using the forced ventilation unit.
|
|
|
Ventilation and Air Conditioning of Civil Buildings
Matějíček, Michal ; Adam, Pavel (referee) ; Hirš, Jiří (advisor)
This bachelor thesis deals with the design of the air conditioning of a swimming pool in Karlova Studánka. Air conditioning ensures forced ventilation and adjusts incoming air to required temperature and humidity inside the pool. The theoretical part deals with literary research on the topic of humid air, evaporation from the water and the thermal load of the object. The experimental part deals with evaluation of the measured humidity and indoor temperature in a bathroom and in a swimming pool.
|
|
|
Pressure losses in heating systems
Švanda, Martin ; Horká, Lucie (referee) ; Počinková, Marcela (advisor)
This diploma thesis deals with pressure losses in heating systems. The diploma thesis is divided into three sections. The first part is theoretical and deals with the occurrence of pressure losses. It discusses the properties of the fluid that affect pressure losses. It also deals with hydrodynamic phenomena, flow distribution, pressure loss distribution and its calculations. The aim of the second part, which is practical, was to create a heating project for a selected object. The object is a two-floor kindergarten building located in Velké Němčice. For this project, two heating variants were created. For the first variant, radiators and heating benches were designed and for the second variant, underfloor heating was installed in the building. The goal was to use a source which will gain heat mainly from renewable sources, so the air / water heat pump was chosen as the source of heat production. The project ends with a technical report. The third part of the thesis is dedicated to an experiment which purpose was to find out how the pressure losses of the connecting pieces are reacting to the change with the change of the heating water conditions (flow, temperature). Alongside, two pipes were created which differed in the type of connecting pieces so it allowed to compare how their pressure losses differ. Both pipes were connected by radial pressing, but the fittings differed in the quality of the brass, and therefore in the construction. Also, part of the experimental section of the diploma thesis is a description of the course of radial pressing of fittings from the Herz company.
|
|
|
Heat pump for resident heating
Abrahám, Jan ; Kudela, Libor (referee) ; Pospíšil, Jiří (advisor)
The bachelor thesis deals with the use of a heat pump for heating a family house. In the theoretical part of the thesis the principle of operation of the heat pump is introduced. This part also explains the coefficient of performance and describes the different types of heat pumps according to the heat source with their advantages and disadvantages. In the practical part the thermal losses of the selected building are calculated. The heating system is designed and finally the economical evaluation and the return of investment are determined.
|
|
|
Airconditioning in healthcare facilities
Růžička, Věroslav ; Jelínek, Ondřej (referee) ; Rubina, Aleš (advisor)
This bachelor thesis deals with design of air conditioning equipment serving the spaces of hospital inpatient ward and its associated facilities. Equipments designed in the computational part have the task to transport adapted fresh air to hospital premises. The system is devided into two units. Primary mechanism operates bedrooms and their sanitary facilities. Secondary mechanism operates associated facilities. Both mechanisms are designed so that hot air can ventilate in winter. To cover the heat load in summer, fancoil units are designed. Device number one is also able to manage the treatment of humidity. The theoretical part of the thesis focuses on air filters and filtration of atmospheric air.
|
|
|
Energy Assessment and PENB when Replacing Heat Source in a Family House
Minář, David ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The diploma thesis deals with energy assessment and proof of energy performance of the building when replacing the heat source in a family house. The theoretical part deals with thermography and thermocamera in energy practice. The experimental part of the thesis was focused on the thermographic survey of the object and the evaluation of the outputs. The computational part focuses on the energy analysis of the assessed energy economy.
|
guest ::
