|
|
Cast-in-place tank of sewage plant
Čožík, Martin ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The thesis deals with the design and assessment of monolithic reinforced concrete structures tanks and wastewater treatment plants in accordance with applicable standards and drafting drawings. The tank is divided into individual solved parts: base plate, walls and ceiling plate. These parts are designed according to the ultimate limit states and serviceability. Resolves an assessment of the foundation structure according to the second geotechnical categories.
|
|
|
The roof structure of the industrial hall in Kyjov
Nosková, Nela ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The Bachelor´s thesis describes design and static assessment of the main roof structure supporting elements of the roof structure of the industrial hall in Kyjov. The hall is designed from timber. The aisle is rectangular floor plan 17,0 x 40,0 m. The main bearing structure causes as a frame truss supported by columns. Solid frame is made from solid timber C24. Purlin is designed from solid timber C24. The static calculation also includes fire resistance reports of single elements. Static analysis has been accomplished by student version of the SCIA Engineer 2012 software.
|
|
|
Storage hall
Osyková, Martina ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
The master thesis ´´Storage hall” deals with designing of selected elements prefabrikated skeleton hall. Discussed elements are truss, beam, girder, column and prefabricate footing. Within above mentioned elements was carried out static analysis, design of reinforcement and reinforcement drawings. Analysis of internal forces for columns and prefabricate footing was carried out with usage of the program Scia Engineer, 3D model of the whole object was created. Analysis of internal forces for the rest of elements was carried out with help of manual calculation. Those elements were designed with consideration of ultimate limit state. Serviceability limit state assessment was carried out within the truss.
|
|
|
Load bearing RC structure of the multiple dwelling
Janisch, Filip ; Perla, Jan (referee) ; Šimůnek, Petr (advisor)
The project deals with the lower part of the construction of a residential building. The parking spaces are situated in three underground floors. The five floors occur in the over-ground part of the building. The building is based on the secant walls of Milan around the perimeter. Internal walls and columns are supported with micropiles. In this project are designed base plate, external walls and stairs. Static system and the calculation of the internal forces was carried out in Scia Engineer 2012 Student version.
|
|
|
Concrete flat slab supported by columns
Turek, Jan ; Požár, Michal (referee) ; Perla, Jan (advisor)
This bachelor thesis deals with design of concrete flat slab of hospital building. The slab above the ground floor was designed. Internal forces were analysed with RFEM software based on finite entity method. Results were proved by the Direct Design Method and Equivalent Frame Method. The structural assessment was performed according to ultimate and serviceability limit states.
|
|
|
Design of cable-stayed pedestrian bridge
Uher, Lukáš ; Kulhavý,, Tomáš (referee) ; Nečas, Radim (advisor)
This diploma thesis aims to design a structure of pedestrian bridge over the Svratka river. To make a preliminary study of possible bridging, three different outlines were drafted. The cable-stayed variant was selected for further analysis. Two towers, inclined in both their longitudinal and transverse direction, support a cast-in-place post-tensioned concrete deck through stay cables anchored in the tower and the deck. After determining the desired initial state, a finite element analysis was carried out using the Ansys software. The capacity of all main load-bearing elements was checked so it meets the ULS and SLS design criteria in accordance with EN 1992 codes.
|
|
|
Design of strengthening of the concrete structure from 1928
Bažantová, Lenka ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The bachelor’s thesis is focused on assessment of the existing construction four-storey building. The supporting system consists of cast-in-place concrete frame. The aim of this work is to assess the support structure for the expected loading of the resulting change in use of buildings for residential or commercial purposes. The subjects of assesment are columns, beams, girders and floor slab. In another part of work is suggested by reinforcement of non-conforming elements. The work includes the development of stroctural analysis and reinforcement drawings of reconstructed elements.
|
|
|
Design of Load Bearing Concrete Structure
Klodner, Jan ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
This thesis is focusing on general issues of floor concrete slabs, technology, implementation, subsoil models, calculation of internal forces and design approaches. Based on these data the thesis monitors the behaviour of floor slabs according to the various parameters. It also includes three versions of design of the real floor slab, made of steel fibre reinforced concrete, reinforced concrete and prestressed concrete. Economic comparison is also included. In addition it developes a design of the chalice base and reinforced concrete column of the supporting hall system, instead of the original usual base with steel column.
|
|
|
Multi-storey building for administrative purposes
Lehocký, Peter ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This bachelors thesis deals with design of administrative building adjacent to a metalworking shed. The administrative building is statically independent on metalwork shed. Building is located in Brno. Floor plan of building is in shape of letter L. Axis distance of columns is 9m longitudinal and 7,5m transverse. Total length of building is 27m longitudinal and 15m transverse ( distance is measured between axis of columns). In narrow part of transverse is width of the building 7,5m. Ceiling is made of composite steel-concrete structure. Height of the building is 18,7m.
|
|
|
Model of a prefabricated footbridge for teaching
Gaidos, Daniel ; Koláček, Jan (referee) ; Strnad, Jiří (advisor)
The subject of this thesis was to design a test model of a foot bridge built out of sets of blocks, coupled by prestressing monostrands into one beam. Created model will serve as a test model during the training of machinists on tensioning equipment. Static model for results from load cases was created in Scia Engineering 20.0. Assessment and dimensioning were solved in the MS Excel program. The structure was assessed for the limit state of load-bearing capacity and serviceability. Analysis and calculations are compliant to up-to-date codes and respect the fundamentals of analysis due to limit states.
|
guest ::
