|
|
Pension PREMIER in Janov nad Nisou, implementation of finishing works
Pavlíková, Jana ; Nečasová, Barbora (referee) ; Kovářová, Barbora (advisor)
In the bachelor thesis I have dealt with finishing work on the top, where I focused on making plaster Hasit and construction of sauna. Plasters are made manually from before-spraying, the core of plaster and final stucco plaster. The construction of sauna lies in the design of the squared timbers. Insulation - PU boards is located among them. The final surface is made use of floorboards, which are made from Scandinavian spruce. The object for which I work processed, is located in a secluded spot in the village called Janov nad Nisou. This is of the changes to the existing layout pension Premier and his extension. As part of my bachelor thesis I'm dealing with technological stage on both objects at the same time.
|
|
| |
|
|
Construction Technology implementation stage of finishing an apartment building in Oslavany
Pelc, Miloš ; Bravenec, Roman (referee) ; Diaz, Yvetta (advisor)
Bachelor’s thesis deals with building technology of finishing works of the apartment house in Oslavany u Brna. The main part of the thesis addresses technological regulations. The regulations solve the technological process of bearing layer, wear layer and, also, inner plastering. The thesis also concerns itself with the block plan, the principles of organization of construction, proposition of mechanical composition, control and test plans, occupational health and safety (OHS/OH&S) and itemized budget with time schedule.
|
|
| |
|
|
Thin-layer mortar mixtures
Ďurtová, Aneta ; Gazdič, Dominik (referee) ; Fridrichová, Marcela (advisor)
The bachelor thesis focuses on the development and properties of singlelayer or thin-layer reliefs formed by the partial substitution of binder components of waste materials, Portland cement and lime hydrate. For the proposed mixtures that have been prepared in the laboratory, they have been verified by the standard of prescribed properties.
|
|
|
Thin-film geopolymeric plasters for exterior application
Ručková, Jana ; Opravil, Tomáš (referee) ; Šoukal, František (advisor)
This thesis is dealing with preparation of exterior thin-layer geopolymer plaster where the effect of supplement of various types of superplasticizers in their different amounts on the quality of geopolymer plaster is studied. The objective of this work is to determine suitable type of superplasticizer which would improve rheological quality of fresh plaster mix, its adhesion to the surface and last but not least would preserve good mechanical qualities of geopolymer binder. In the experimental part initially test subject were prepared from meta-kaolin, water, water-glass, sand and with supplement of various types of superplasticizers in various amounts. These test subjects were tested for compressive and flexural strength. Further workability and adhesion to the surface of these plaster pastes was observed. Geopolymer pastes were also subjected to calorimetric comparison of kinetic processes occurring during solidification and hardening. In order to identify the exact composition of superplasticizers used as rheological modifiers, the infra-red spectrometry of these substances was performed. There was a need to specify the water-glass in more detail as well, elemental analysis was performed on it on radiographic fluorescent spectrometry. To closer identify the structure and distribution of superplasticizer in geopolymer paste the pictures of the mix which was the most suitable for use for exterior thin-layer geopolymer plasters were made on scanning electron microscope. On the same mix radiographic diffraction on the powder samples was also performed which served for phase analysis.
|
|
|
Development of Apartment Complex - Block F, Stage 2 "Díly za Svatým Jánem" in Kuřim, interior and finishing work
Běťák, Rostislav ; Kopecký, Lukáš (referee) ; Šlanhof, Jiří (advisor)
The bachelor thesis deals with the inner and finishing works in a apartment building – block F. New building is located in the village Kuřim, in its part „Díly za Svatým Jánem“ on the street Metelkova. The building is located on plot number 2642/431 and it is a new building with twelve flats. The interior and finishing work consist in the design of plasters, flooring, drywall works, painting and assembly works. This work deals mainly with the plaster design. The plasters will be made from the plaster core, the inner stucco or there can be used the other superficial treatments.
|
|
|
Project planning and management of construction residential houses in the file Štětí
Sládek, Lukáš ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The subject of this thesis is the preparation and organization of construction of residential buildings in Štětí. In the technological regulations deal with all the layers of flooring from the ceiling construction in residential buildings. The objects are hard floors. For floor coverings will be used PVC roofing, ceramic tiles and concrete coating. It will be used for machining of concrete. Next, I will discuss technological instruction, timing, valuation of all technological stages, construction site equipment, health and safety at work. Also here describe the proper allocation of construction processes into sub-processes to technological stage of completion of work most effectively achieve the objective.
|
|
|
Utilization of mica separated from washed kaolin
Vaculík, Josef ; Ptáček, Petr (referee) ; Opravil, Tomáš (advisor)
The Master’s Thesis aims to laboratory test the possibilities of utilization mica separate, which arises during the process of floating kaolin as a by-product together with sand. Mica and sand are then separated by flotation or vibration. The mica separate thus formed was subjected to analysis. XRD and heating microscopy methods were used for analysis. Subsequently, experiments with mica separation as a filler in composites based on epoxy resins were set up and performed. Furthermore, the separate was tested as a part of plasters and visual building elements. Last but not least, the separate was mixed into the ceramic, which was then subjected to firing in the selected mode. The diploma thesis provides a comprehensive overview of the above-mentioned possibilities of using mica separation, which is based on a sufficient amount of experimental data.
|
|
|
Modification of dry stuff with lime sludge
Švec, Jiří ; Kovářová, Alena (referee) ; Ptáček, Petr (advisor)
In modern point of view of waste management is desirable to effectively process the grates possible amount of wastes. Sediments from cleaning of mined lime stones contains a lot of clay components, but there is also indispensable share of soft calcite. Especially this can be use in following processing. After firing, where is necessary to set suitable temperature, arises a mixture of soft calcinated lime and remaining dehydrated mineral components. This calcinated mixture could partially replace used binders in dry stuffs.
|
guest ::
