|
|
Mixed-flow submersible water pump driven by hydrostatic motor
Para, Marcel ; Ranuša, Matúš (referee) ; Nevrlý, Josef (advisor)
Bachelor thesis solves the problem of a submersible, diagonal hydrostatic pump. This study describes the basic principles of hydraulics and equipment. The possibility of engaging the hydrostatic system as an amphibious vehicle is investigated in the Bachelor thesis. The work is written in cooperation with the sponsor of HYDRAULIC RESEARCH CENTRE, spol. S.r.o., which is part of SPL Holding., Inc.
|
|
| |
|
|
Multi - Purpose Sports Hall
Baudišová, Monika ; Bajer, Miroslav (referee) ; Sýkora, Karel (advisor)
This thesis deals with design of a multi-purpose sports hall. The aim of this work is to design a support structure with a diameter of 80.0 m at ± 0.000. Construction of a circular layout in the level of ± 0.000 of an external diameter 80.0 m. Height of the hall at the top is 20.0 m Indoors girders is solved in 36 beams which meet at the middle of the rings. Ensure the stability of bracing. Anchoring is done by pin connections located at the bottom of the strip, anchored in concrete bases through the base plate and pre-concreted anchor bolts.
|
|
| |
|
|
Steel Lattice Mast 4x110kV
Baďura, Martin ; Karmazínová, Marcela (referee) ; Melcher, Jindřich (advisor)
The aim of this thesis is the design of the supporting steel lattice tower for power lines 4 x 110 kV. The spatial structure of the support construction is designed in accordance with the security requirements for the purpose of the object (i.e. power transmission). The supporting structure of the tower is designed from standard rolled steel sections and accommodates any recent changes in regulations and technical standards related to the construction and operation of outdoor high-voltage power. These changes are mainly related to the new European regulations and standards and their harmonisation with the Czech system.
|
|
|
Bridge crossing over Svitava river and railway track in Blansko
Smělíková, Petra ; Konečný, Vojtěch (referee) ; Křižan, Lukáš (advisor)
The aim of the Diploma Thesis is elaboration of study of bridge crossing over the Svitava river and ČD railway track in Blansko. It concerns a five-pole steel beam road bridge with through-span which carries road of the third category. The static system of the construction is solved as solid-web beam of 1.3 meters height which is in three middle spans reinforced by truss construction with top chord and system of diagonals without verticals. The height of the main beam where reinforced by trusswork is 4.75 meters. The width of spans in the road axis is 18.5 + 30.525 + 44.4 + 30.525 + 18,5 metres. The bridge deck consists of steel cross beams bonded with reinforced concrete slab of 200 millimeters of thickness. The drive-through width of the roadway is 7.0 meters. The bridge is fitted with right-sided walkway placed on steel cantilevers. The walk-through width of the walkway is 3.0 meters. Material used is S355 Steel, C30/37 Concrete and S460 Steel which is used for marginal spans of the bridge. Load-bearing construction is assessed in compliance with current technical requirements laid down by European Directives, so called “Eurocodes”. The calculation of inner powers is performed using the Scia Engineer 2013.1 software.
|
|
|
Footbridge in Blansko
Urbánek, Jan ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
The subject of the thesis is design and check of steel load-bearing structure of a footbridge. The footbridge spans the river Svitava in the town Blansko. The span length is 24 metres. The structural design is spatial bar structure with two main trusses. The upper and lower chords are curved in the shape of circular arch and they are connected by diagonal bars. In the level of the upper and lower chords the beams are connected by floor beam. Horizontal rigidity of the upper and lower construction area is secured by bracings. The bridge deck is laid on the lower floor beam. The solution is the result of the comparison and evaluation of two variants.
|
|
| |
|
| |
|
|
Mixed-flow submersible water pump driven by hydrostatic motor
Para, Marcel ; Ranuša, Matúš (referee) ; Nevrlý, Josef (advisor)
Bachelor thesis solves the problem of a submersible, diagonal hydrostatic pump. This study describes the basic principles of hydraulics and equipment. The possibility of engaging the hydrostatic system as an amphibious vehicle is investigated in the Bachelor thesis. The work is written in cooperation with the sponsor of HYDRAULIC RESEARCH CENTRE, spol. S.r.o., which is part of SPL Holding., Inc.
|
guest ::
