|
|
Sustainable energy sources
Doležal, Jan ; Nerud, Pavel (referee) ; Škvařil, Jan (advisor)
This bachelor’s thesis is a recherche dealing with sustainable energy sources. It lists and describes the various sources and shows their operating principles. In the last part it evaluates their current use in the Czech Republic and the possibilities for further development from economic and technical point of view.
|
|
|
Overhead Line Protection against Climatic Effects
Sýkora, Martin ; Topolánek, David (referee) ; Orságová, Jaroslava (advisor)
The outdoor overhead lines are influenced by additional load pressure of wind and frost. These can have adverse reaction on outdoor conduction of the electric power. My bachelors' report deals with separate climatic effects and possibilities of their resolution. It it also concentrates on removing the negative influences caused particularly by wind and on the possibilities of liquidation of the frost that had already originated.
|
|
|
Wind power production for small-scale energy supply
Pavlik, Richard ; Chroboczek, Libor (referee) ; Pospíšil, Jiří (advisor)
The aim of this work is the issue of utilization of wind energy. At first, the cause of wind, measuring methods of wind direction and speed and the principle of utilization of wind energy by wind turbines are described. Subsequently, the structure of wind turbines, the construction of wind parks, the development of new types of wind turbines and the possibilities of energy accumulation are introduced. In conclusion, the concept and the economic evaluation of wind powered system for small scale energy supply is analyzed.
|
|
|
Measurement of changes in the inclination of the Velký Kosíř lookout tower structure due to the influence of wind stress
Smetana, Jonáš ; Bárta, Ladislav (referee) ; Bureš, Jiří (advisor)
This thesis deals with the issue of displacements and deformations of building constructions. Specifically, it deals with changes in the inclination of the Velký Kosíř lookout tower structure due to wind stresses. The first part of the thesis deals with the theoretical description of the issue of displacements and deformations of buildings and measurement methods. The second part presents the testing of the geodetic method used for dynamic measurement. This involves setting up a total station in an automatic tracking mode and aiming a reflecting prism. The third part then deals with the actual measurement of the lookout tower Velký Kosíř, evaluation of the stage measurement, interpretation of the results and comparison of the methods used. These methods are represented by the polar method in a standard mode and the polar method in the mode of automatic tracking of the reflection prism and measurements of dynamic acceleration using accelerometer. The final objective is an evaluation of the inclinations under given wind conditions and the evaluation of the lookout tower inclination in the long term.
|
|
| |
|
|
Design of wind power plant
Starý, Ondřej ; Dlugoš, Jozef (referee) ; Řehák, Kamil (advisor)
Renewable energy sources are currently a much-discussed issue. One of the possibilities of their use is the production of electricity using wind power plants. This work therefore describes in detail construction of wind turbines. At the same time, there is a brief evaluation of wind power plants, from an energy and economic point of view. Part of the work is also the calculation of the optimization of the gearbox weight and a description of the design of the wind turbine coupling.
|
|
|
Ultrasonic Anemometer
Křepelka, Pavel ; Fialka, Jiří (referee) ; Beneš, Petr (advisor)
In the first section of this document, there are described principles of the wind measuring. Anemometers can be divides by physical principles to mechanical (propeller or cup), ultrasonic anemometers and thermoanemometers. This paper is focused to ultrasonic anemometers. In the next part, there are described principles of sound propagation in the atmosphere. There are studies of measurement theory and comparing of different approaches. Completed solutions are presented in patent exploration. Afterwards, there are introduction of market research. Important parameters of ultrasonic anemometers are highlighted. Main aim of work is designing prototype of ultrasonic anemometer. Software, hardware and construct of experimental anemometer were designed. Created anemometer was calibrated in aerodynamics tunnel and results were compared with simulation output.
|
|
|
Design and construction of small windpower
Novák, Kamil ; Svoboda, Pavel (referee) ; Prokeš, František (advisor)
This thesis describes the design and construction of small domestic plants. It describes device with three-blade rotor and rated power 1 kW. It presents basic information and rules for the structure and gives an overview of the different types of design. The work is intended as a basic source of information for future implementation. The work includes the assembly drawing.
|
|
|
IoT system for gardening
Mlčák, Petr ; Kiac, Martin (referee) ; Caha, Tomáš (advisor)
The thesis deals with the design and creation of a weather station suitable for gardeners. The created device is able to measure temperature, pressure, humidity, amount of precipitation, wind speed and direction, UV index and also temperature and soil moisture at several depths. The weather station is powered by a battery with auxiliary charging from a photovoltaic panel. The thesis is divided into several parts. The theoretical part describes the individual physical principles of measurement of the considered physical quantities. Subsequently, a comparison of available sensors is made and then a final selection is made. The third part deals with the design and implementation of the hardware circuitry including the creation of the PCB. In this section, the holders of each sensor are also designed for printing on a 3D printer, which are then printed. The fourth section deals with software design issues, which is described in more detail. Finally, the whole weather station is assembled, wired and the functionality of all components is verified by sending the measured data to Thingspeak.
|
|
|
Measurement of meteorological variables
Škorpík, Daniel ; Harabiš, Vratislav (referee) ; Chmelař, Milan (advisor)
This bachelor thesis discusses about the basic meteorological variables, especially temperature and airflow. These magnitudes are measured using an anemometer which uses resistive sensors, namely, two thermistors of NTC type that described technology, operations, methods of scanning, sensor placement and implementation of such a device. After that was designed block diagram and circuit diagram. The meter is realized, than we describe the individual components and then is calibrated and tested. In conclusion, it is evaluated for use in medicine.
|
guest ::
