|
|
Modular Power Supply for Formula Student
Ščípa, Samuel ; Bohrn, Marek (referee) ; Pavlík, Michal (advisor)
This bachelor thesis is focused on the theoretical analysis and design of switching power supply with galvanic isolation. The implementation of the design is in the form of the power and control part of the modular power supply. The device parameters are suited for the needs and requirements of the development department of the electric student formula. Design configuration achieves a maximum output voltage of 1000 V and a current of 100 mA, which are user-adjustable.
|
|
|
Laboratory Switching Power Supply
Slezák, Jakub ; Petržela, Jiří (referee) ; Šebesta, Jiří (advisor)
This bachelor’s thesis is concerned with design switching power supply based on forward converter with output voltage regulated in the range of 3 to 30V and load current to 1 A. First of all, it discusses the theoretical solution of basic types of converters and switching power supply problems. Followed by a proposal of various parts source, which was first established in the test version on the test board. Then was proposed printed circuit board and complete mechanical solutions. Source is also equipped with digital modules for measuring voltage and current, and is protected against overload.
|
|
|
Usage of High Power Inverters in High Voltage Sources
Zemánek, Miroslav ; Janča, Jan (referee) ; Boušek, Jaroslav (referee) ; Patočka, Miroslav (advisor)
This work is concerned with power inverters for alternate high voltage power sources. The theoretical part describes the topology of inverters that can be used in alternate power sources. A model of voltage transformer is described in details to better understand the parasitic effects that are inevitably present in high voltage power sources and, therefore, have to be taken into consideration at the design of high voltage power sources. The work is oriented to problems of alternate high voltage power sources for ozone generators. This is the reason, why the theoretical and, partially, also the experimental part deal with the properties of ozone and its use. The experimental part solves high voltage inverter with capacitive load that is formed by discharge element of an ozone generator. Designed inverter is able to feed the capacitive load with high voltage at very short periods of time from several microseconds up to tens of nanoseconds. In comparison with the length of voltage pulses in common ozone generators, this pulses are more than 100-time shorter. This has a positive effect to silent discharge characteristics.
|
|
|
High effective switched power supply
Rástočný, Martin ; Kledrowetz, Vilém (referee) ; Pavlík, Michal (advisor)
This bachelor’s thesis analyses theoretical basis of switched mode power supplies. Selections of right topology for implementation, design of power and control circuits are discussed. The thesis also contains a brief summary of switched mode power supplies. Subsequently it focuses on calculations and selection of appropriate power components. A result of the thesis lies in development and practical design of switched mode power supply and its optimization for high effectivity of conversion. To achieve these theoretical calculations of parameters for chosen topology were made.
|
|
|
Models of DC transistor converters in Simulink program
Loup, Martin ; Pazdera, Ivo (referee) ; Huták, Petr (advisor)
The master’s thesis is focused on the creation of models of DC/DC converters and control program for input parameters and their configuration. The first part is theoretical and she is dedicated to the description of the program Matlab. The second chapter is dedicated to DC/DC converters. Their function is described there and the necessary equations for the design are derived. All of this is complemented by the calculation of line losses in semiconductor elements and the design of voltage and current regulator. The last two parts deal with the description of the created models in Simulink and control program in a graphical environment. The created program is able to edit and recalculate parameters of the converters, calculate line losses on semiconductor components, perform a model simulation or open it.
|
|
|
Resistive Heating System for Work Shoes
Pár, Lukáš ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This bachelor thesis deals with the design of a device for the resistive heating of work-shoes, the circuits of a power converter for a heater and the battery-pack. Two variants of the heater are designed in the first part of thesis. Thesis continues with design of DC/DC converters for both types of the heater. Next part of the thesis deals with a design of the battery-pack with simple BMS circuits. The design of the control circuit for selected DC/DC converter follows. Next part of thesis deals with the construction of the device. Last part is dedicated to measurements and verification.
|
|
|
230 V inverter for isolated mains supplied from solar cells
Michálek, Pavel ; Procházka, Petr (referee) ; Martiš, Jan (advisor)
In this thesis is presented detail design of power part of DC/DC converter and output inverter. This device will serve for creating an artificial network in a family house where it will be used for supplying selected household appliances which are designed for use in AC network. The converter will be supplied with DC voltage. This tension will be obtained from a system of photovoltaic panels. The output voltage will have alternate character and it will be close to the network voltage 230 V/50 Hz. In the introductory part of thesis are discussed possible topologies of converters and output inverters. Subsequently are designed individual parts of supply inverter. In the final part there are shown waveforms of important values and is given a thesis evaluation.
|
|
| |
|
|
Switch mode supplies
Hladík, Jan ; Martiš, Jan (referee) ; Patočka, Miroslav (advisor)
This thesis deals with the design of switched power supply for laboratory lessons. Forward converter was chosen as the topology of this power supply. Output voltage is adjustable from 0 V to 32 V. Power supply is capable of output current up to 10 A and output has adjustable current limiting. Following parts were designed: LC filter, pulse transformer, bridge rectifier with capacitor, power MOS-FETs driver, closed loop control with its auxiliary power supply. Cascade closed loop control is used for controlling of designed power supply. Control is analogue, operation amplifiers were used for its construction. PCB was designed for the whole power supply. Power supply was sucessfully assembled and tested.
|
|
|
Laboratory DC power supply 30V 60A
Gábel, Marián ; Vorel, Pavel (referee) ; Martiš, Jan (advisor)
The master thesis deals with design of a switched DC power supply with output parameters of 30 V 60 A. The power supply uses the connection of two single switch forward converters with opposite phase. The topology was chosen based on a comparison of specific schematics in the first part. The body of the thesis is covered in chapter which deals with design and analysis of power circuits of the converter. The chapter describes detailed design of pulse transformers, dimensioning of semiconductors and cooling system of the converter. For lower power losses, the system of synchronous rectifying is chosen at the output of the circuit. The regulation of the output is based on cascade structure with a superior voltage and dependent current loop. Appropriate over current protection is provided by sensing the output current and using current transformers for primary current measure.
|
guest ::
