|
|
Multifunctional house
Blaha, Ondřej ; Janík, Zdeněk (referee) ; Kalousek, Miloš (advisor)
This final thesis deals with a project documentation of a new multifunctional building. The building is located in Žďár nad Sázavou, in the Neumannova street. The building is divided into residential units and areas for a small company and a shop. The house is projected as a detached building with a partial basement and three floors. The residential part has 8 apartments in total – four apartments with three bedrooms, one with two bedrooms and three with one bedroom. It includes also cellars belonging to the apartments. The non-residential part includes space for a shop and an administrative part consisting of a reception, a meeting room, offices, stores and sanitary facilities. The main entrance in to the residential part is located on the level of staircase half landing. Main entrances into the non-residential parts are on the level of the ground floor. The house dispose with 24 parking places, two of them are dedicated for drivers with disabled parking permit. The building is based on concrete strip foundations. The external load-bearing structures are walled with clay masonry in the floors and with permanent formwork in the basement. The ceiling structure is formed with prestressed floor slabs. The house is covered with a warm flat roof. The staircase is pre-fabricated. In the thesis, there was put a stress on the appropriate dispositional, structural, technical and architectural design and on the safety in the use of the building. The drawing documentation is processed in the AutoCAD.
|
|
|
Detached House with Establishment
Minářová, Klára ; Kyceltová, Lucie (referee) ; Králová, Zuzana (advisor)
The subject of the bachelor's thesis is the preparation of project documentation for the construction of a detached house. The object is located in the town of Markvartice in a gently sloping terrain, and it is conceived for families of four members. The family house is designed as a stand-alone, two-floor, with a partly made cellar. There is also a garage in the house. The main entrance is at the level of the 1st floor, and the entrance to the building is at the basement level. The main rooms are oriented to the south. Vertical structures are made of ceramic blocks. The ceiling construction is made of bricks with miako inserts and ceramic concrete joists. The detached house is topped by a shed roof. The project was prepared using the computer program AutoCAD. When processing, the emphasis was put on the correct layout, architectural solutions, static requirements and safe use of the building.
|
|
|
Fire Station Type C2
Wojcik, Jindřich ; Dohnal, Jakub (referee) ; Fuciman, Ondřej (advisor)
Diplom thesis is about design of the fire station of type C2 for the HZS. The building is divided into two parts. First part of a building is designed as a rectangular recessed floor. The first part of building consists of two floors and one underground floor. Roofed by a single-layer flat roof of soft PVC. The building will be used to perform the services, the fire brigade. It will be used 24 hours a day. In the basement is located warehouse, HVAC room, utility room and a lounge with an alternative source of electricity. On the first floor are designed garages for storage technique and also the dressing room, workroom, washing box, warehouse, room for chemical-technical service and concierge. The second floor is designed to serve firefighters. The second part of the building is a training tower, which will be used to train firefighters and for drying hoses. The training tower is designed as a simple steel structure with four floors. The project was developed in the educational version of ArchiCAD 16th project is designed in accordance with the requirements of a layout, architectural design, structural design proper and safe use of the building.
|
|
|
Pension for Seniors
Vítek, Jan ; Ing.Jaroslav Kavka (referee) ; Čuprová, Danuše (advisor)
This Diploma´s thesis proceses topic Pension for Seniors. The object is situated in Božetěchova street in Brno-Královo Pole. This house is new building, three-floored and partial basemented. Basement is a technical floor. On the first floor are spaces of services and offices. On the second and the third floor are situated twenty-eight flats. Shape of the house is „L“ and its basic dimensions are 39,0 x 38,0 meters. The building is finished with a single layered flat roof. Height of house is 10,715 meters. The base structures is of conrete C16/20. The bearing walls on 1S are of monolithic reinforced concrete. Other Bering construction system is used of Porotherm. The staircase structure consists is of monolithic reinforced concrete.
|
|
|
Detached house, Nové Město nad Metují
Grymová, Gabriela ; Kalánek, Jiří (referee) ; Kolář, Radim (advisor)
The topic of this bachelor thesis is processing of a project documentation of a new family house in Nové Město nad Metují. The object is designed as a two-floor house, partly with a cellar. It is projected for 4 persons and its size is 4+1. Ground floor is designed into the shape of uneven „T“, while the first floor takes shape of rectangle. First floor is roofed by a saddle-shaped roof with an inclination of 30°, while the other parts of the object have a flat roof. Surface is made from wooden facade and contact thermal insulation system. Parking place is situated next to the object. The place is roofed together with a part of the first floor by the same flat roof. The construction is made from ceramic blocks and lost formwork. It has got monolithic reinforced concrete ceilings and stairway.
|
|
|
Villa in the town
Vondrová, Michaela ; Vacenovská, Veronika (referee) ; Šuhajda, Karel (advisor)
It is about new-built Town Villa standing alone in a new location in the cadaster unit of the town Červený Kostelec. The building has three-floor with a partial basement and it follows the sloping terrain by its design. The building is designed for four to six-members family.There are technical amenities of house and wellness center on basement including sauna, whirlpool bath and gym. On the first and second floor are habitable rooms of villa and separate apartment. The house has two spacious terraces, balcony and garrage for two cars. The structural system of the building is composed of thermal insulation ceramic masonry and reinforced concrete wall in permanent formwork. Vertical structures are designed by Porotherm masonry, horizontal structures are designed by Porotherm system and load-bearing elements of Isokorb® system. The building is roofed with a warm flat roof.
|
|
|
The accommodation facility of Blanice
Bače, Jakub ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
This diploma thesis deals with the elaboration of the project documentation of the construction of the Blanice accommodation facility. The object has a rectangular shape. The proposed building is located in Vodnany. The accommodation facility is designed for 28 people and 32 seats in the restaurant. The building is designed as a four-storey, partly basement. On the underground floor there are storage areas, technical background. On the first floor there is a main entrance, a reception and a restaurant with technical facilities for the staff. On the second and third floor there are guest rooms. On the second floor there is also a room for people with limited mobility. The building is bricked from brick blocks with a flat roof Keywords.
|
|
|
Ecology Wooden Structure House in Krtiny
Židek, Ondřej ; Konečná, Petra (referee) ; Králová, Zuzana (advisor)
The aim of my bachelor's thesis is a project of a new detached house on a sloped site at a level of the documentation for the structure realization. The building is partly basement with two above-ground floor. Individual floors up recede and are roofed with half span roof. The building is divided into four sections.The structure system of the basement part is made up of permanet shuttering and the above-groud part is made up of timber frame. The project of the building is in accordance with the development plan of Křtiny and with the current street built. The work puts great emphasis on layout including security of the construction in terms of statics, architecture, energy savings and safety at utilizing the structure.
|
|
|
High Standard Detached House
Karlík, Štěpán ; Nováková, Tereza (referee) ; Kalousek, Lubor (advisor)
This bachelor’s thesis deals with a new built detached house situated in Přestavlky, Přerov district. The building has two floors with a partial basement, made of sand-lime brick system Sendwix. Ceilings are made of monolithic reinforced concrete and the building is covered with the shed roofs. The object is divided into the social area on the first floor, the sleeping area on the second floor and the technical facilities in the basement. Living rooms are mainly situated in the southern part of the building, in connection with a large terrace.
|
|
|
The New Block of Flats
Jelínek, Roman ; Hnízdilová, Aneta Aya (referee) ; Manychová, Monika (advisor)
The subject of the bachelor thesis is a new apartment building with nearly zero energy consumption and the processing of the design documentation for this building construction. The building is located in a quiet area of the village of Lužice near the town Hodonín. It is designed as a detached structure, with a partial basement and three floors, located on a slightly sloping terrain. In the basement you can find the maintenance room of the building, and the cellar cubicles for the individual apartments. On the first floor there are three apartments with their own front gardens, as well as the common areas of the bike shed, the drying room and also the fitness room. On the second floor there are four apartments with their own terraces. Now, on the third floor there are two very spacious apartments with large terraces. In front of the building there is a large parking lot, the apartment building is barrier-free by to the internal elevator. The construction system of the building is a two-way wall system. The above-ground floors are built with ceramic blocks. The perimeter masonry of the basement is consist of blocks of permanent formwork. The horizontal structures are prefamonolithic, composed of POT beams and Miako ceramic inserts. The building is based on concrete foundation strips and covered with a single-layer flat roof.
|
guest ::
